|
|
Antenna for broadband impulse signal
Smutný, Martin ; Kořínek,, Tomáš (referee) ; Drexler, Petr (advisor)
The thesis describes retrievals of broadband antennas for VHF and UHF. It focuses on a compact antenna, potentially suitable for detecting electromagnetic impulses generated by electrical discharges in the dielectric oil in power transformers. This pulse signals are very steep with hundreds pico seconds rising edge. The thesis presents basic characteristics of antennas and selects those which have a major influence on the possibility of using the antenna in selected application. The appropriate antena is selected and proposal its geometrical parameters is discussed. The geometry of the selected antenna is designed for working bandwidth from about 200 MHz to about 1000 MHz. The newly designed double discon antenna is simulated and dimensions are optimized. Antenna is made and key characteristics of the antenna important for evaluate the ability of detecting the above-identified pulsed signals is measured. Antenna is compared with gain and characteristic of monocone antenna. Acquired knowledge and measured data are evaluated.
|
|
|
Property record based on RFID technology
Černý, Jakub ; Dydowicz,, Petr (referee) ; Kříž, Jiří (advisor)
This bachelor work focuses on the study of the modern technology of RFID tags and its application at Faculty of Business and Management in Brno. The main subject of this work is to use this technology as a replacement of barcode technology with the intention of raising processing speed, effectiveness and protection against stealing.
|
|
|
Antena integrated to automobile seat
Gulda, Tomáš ; Mrnka, Michal (referee) ; Cupal, Miroslav (advisor)
This thesis is focused on the design of the antenna integrated to automobile seat. Thesis explains the basics of RFID technology, and how RFID works. Especially explains the design of tag, which works in the UHF band. The tag was designed in the CST Microwave studio, where simulations were realized to verify basic properties of the tag such as S11 parameter and directivity. The thesis also contains simulation of the impact of automobile seat on the directivity. Here is the description of how the antenna was made on a textile substrate and here are also measured properties of the antenna.
|
|
|
60GHz omni-directional antenna
Levocký, Kristián ; Pítra, Kamil (referee) ; Mikulášek, Tomáš (advisor)
This thesis deals with brief research on problematics of antennas in microwave band for omni-directional applications, own design and assembling of such an antenna. The purpose of the design is to have a best possible radiation patterns and reflection loss of our antenna. Conical monopole is chosen and it is simulated and changed to get the best possible parameters. Two prototypes are manufactured with mechanical changes applied and their parameters measured. Finished antenna is used for experimental channel measurement.
|
|
| |
|
| |
|
|
Exploatation of VHF, UHF, SHF, and EHF frequency bands in civil & military aeronautic radars (handbook)
Jasimová, Rafah ; Šplíchal, Miroslav (referee) ; Vosecký, Slavomír (advisor)
VHF, UHF, SHF, EHF, radar, wave propagation, electromagnetic wave, active radiolocators, passive radar system
|
|
|
60GHz omni-directional antenna
Levocký, Kristián ; Pítra, Kamil (referee) ; Mikulášek, Tomáš (advisor)
This thesis deals with brief research on problematics of antennas in microwave band for omni-directional applications, own design and assembling of such an antenna. The purpose of the design is to have a best possible radiation patterns and reflection loss of our antenna. Conical monopole is chosen and it is simulated and changed to get the best possible parameters. Two prototypes are manufactured with mechanical changes applied and their parameters measured. Finished antenna is used for experimental channel measurement.
|
|
|
External Part of the Receiving System for UHF Satellite signals
Sýkora, Jan ; Herceg, Erik (referee) ; Urbanec, Tomáš (advisor)
This bachelor thesis deals with omnidirectional antennas in the UHF band, especially Lindenblad’s omnidirectional antenna and its nulls in the radiation pattern. The aim was to design a preamplifier, power supply circuit and bias tee with the transmission of power supply, UHF signal and reference GPS signal through single coaxial cable towards a receiver. A further requirement was to design a mechanical part of the antenna which holds it together with considering modern manufacturing processes - 3D print. The final task was the measurement of antenna’s real parameters.
|
|
|
Antena integrated to automobile seat
Gulda, Tomáš ; Mrnka, Michal (referee) ; Cupal, Miroslav (advisor)
This thesis is focused on the design of the antenna integrated to automobile seat. Thesis explains the basics of RFID technology, and how RFID works. Especially explains the design of tag, which works in the UHF band. The tag was designed in the CST Microwave studio, where simulations were realized to verify basic properties of the tag such as S11 parameter and directivity. The thesis also contains simulation of the impact of automobile seat on the directivity. Here is the description of how the antenna was made on a textile substrate and here are also measured properties of the antenna.
|
guest ::
