|
|
Active Filters and their Transformation to Differential Structures
Bečková, Zuzana ; Herencsár, Norbert (referee) ; Vrba, Kamil (advisor)
Bachelor thesis is considered with transformation of single--ended frequency filters to fully--differential structures. Theoretical part contains a brief introduction to frequency filters and short summary of important features of signal flow graphs. Active elements, which are used in designed filters, are shown in the third chapter. Practical part of the thesis shows five single-ended filters (one already published, four newly designed) and their transformation to fully-differential structures. Results of simulations in programms OrCAD and SNAP are shown.
|
|
|
Analysis of differential and non-differential filtering structures with adjustable current amplifier
Dvořák, Jan ; Vrba, Kamil (referee) ; Jeřábek, Jan (advisor)
The master thesis deals with designs of the single-ended and the fully-differential secondorder frequency filters with adjustable parameters. This filters operate in the current mode where main element is the current amplifier DACA (Digitally Adjustable Current Amplifier). The first part describes basic behaviour of frequency filters and distribution according to filter funcion, used parts and structure. The second part of thesis describes the design of the frequency filters by the M-C signal-flow graphs and the transformating single-ended structures to the fully-differential forms. The next part deals with properties of the active elements and their simulation models. The following part describe six circuits of the frequency filters with adjustable parameters and their simulations. Four simulation models with different properties were used for simulating of the DACA in the each circuits. The last part deals with the practical design and measurement of the selected frequency filters.
|
|
|
Fully-differential frequency filter designing with current active elements using signal-flow graphs method
Štork, Petr ; Jeřábek, Jan (referee) ; Langhammer, Lukáš (advisor)
This master’s thesis deals with designing of fully-differential current-mode frequency filters using signal-flow graphs method. The first part is focused on a general description of frequency filters, its function and division. Active elements that create these frequency filters, such as multi-output current follower (MO-CF), balanced or multi-output transconductance amplifier (BOTA, MOTA) and digitally adjustace current amplifier (DACA) are described in the following part. Next, problems and various techniques of designing such filters are discussed on a theoretic basis. In the remaining part of the thesis there are six circuits of frequency filters described in detail; these connections are then transferred of passive elements to a proposed connections, with the assistance of a so-called reflection. Calculations of passive form are stated, as well as results of simulations, where nondifferential and differential variations of these designed frequency filters are compared. Finaly, it has been selected some variants of designs, which has been manufactured, then measured out and resulet has been compare between each other.
|
|
|
Synthesis of the electronically reconfigurable frequency filters
Michalička, Filip ; Dvořák, Jan (referee) ; Langhammer, Lukáš (advisor)
This diploma thesis deals with design of reconection-less electronically reconfigurable filter structures which have single input and single output using unconventional active elements, which have ability to adjust one of their parameter e.g. gain or transconductance. The first part describes basic parameters of frequency filters, the division of filters by frequency transfer response and used circuit elements, their operational modes, the principle of reconnection-less electronically reconfiguration and the circuit design method MUNV. Second part describes all active elements used in the proposal of filters, their properties and the implementation using existing transistor-level models. The third part contains the design of three reconnection-less electronically reconfigurable filters and the simulations results obtained from simulation programs OrCAD Capture and PSpice. The obtained results were compared with theoretical behaviour. This part also contains results of these analyses: sensitivity, parasitic, Monte Carlo and temperature to determine the behaviour in varied cases.
|
|
|
Electronically reconfigurable frequency filters
Gajdoš, Adam ; Langhammer, Lukáš (referee) ; Jeřábek, Jan (advisor)
The aim of the thesis was design of reconnection-less and electronically reconfigurable filters of SISO type with non-traditional active elements. Adjustability of bandwidth or quality factor is also required. First part of the thesis deals with theoretical analysis of filters, their operation modes and design of frequency filters using Signal-flow graph method aswell. Last but not least, electronical reconfiguration of transfer function and parasitic analysis was discussed. Another part describes active elements used in the practical part of thesis. Behaviors and design of active elements using existing circuits (e.g. UCC,EL2082) are described and their transformation into the Signal-flow graph form too. In the practical part five reconnection-less and reconfigurable filters of SISO type was designed using SNAP program. Simulations were done using Orcad program with ideal and real simulation models of active elements. Last part deals with filter design in EAGLE and experimental measurement.
|
|
|
Application possibilities of LNVGA programmable amplifier
Sobotka, Josef ; Hanák, Pavel (referee) ; Jeřábek, Jan (advisor)
This thesis deals with the theoretical description of the qualitative characteristics and parameters of some modern active elements, also discusses the theory of signal flow graphs at the level applicable for the following frequency filter design methods. The thesis is also generally discussed the issue with the circuit simulator PSpice modeling theory and voltage amplifiers on the basic 6-levels. The practical part of the work is divided into two parts. The first practical part is dedicated to design four levels of simulation model of components LNVGA element. The second practical part contains detailed theoretical proposals for three circuit structures implementing the frequency filters 2nd order (based on the basic structure of the OTA-C) using signal flow graphs with configuration options of Q and fm based on the parameters of active elements in the peripheral structure and their verification with prepared LNVGA model layers.
|
|
|
Pseudo-differential fractal-order frequency filters
Alkanan, Mohamad ; Dvořák, Jan (referee) ; Sládok, Ondřej (advisor)
This bachelor´s thesis deals with pseudo-differential frequency filters of fractal order. It is a proposal of non-integer order (1 + ) of pseudo-difference filter. The introduction to the theory describes the basic properties of frequency filters, their type and use. The following is a description of pseudo-differential and differential filters. The next part of the text is devoted to filters of non-integer order. Then there is a description of the current conveyors used (UCC, DVCC and DDCC). The next part of the work is devoted to the design, which is a pseudo-differential frequency filter of fractal order (1 + ) and its subsequent mathematical description in the SNAP program. The functionality and correct behavior of the filter were verified by simulations in OrCAD. The last part of the work is devoted to the practical measurement of the filter.
|
|
|
Synthesis of electronically configurable filters with modern active elements
Hricko, Tomáš ; Šotner, Roman (referee) ; Langhammer, Lukáš (advisor)
This bachelor thesis is concerned of proposal electronically configurable filters. The first part describes the basic division of frequency of filters and working modes alongside with the principle of electronically configuration. All active elements used in the proposal of presented circuit solutions are defined in the second section. The third part consist of the design of three circuits of electronically configurable filters and comparison of theory with simulation results obtained from program OrCAD PSpice. The concluding part of the work compares the experimental results of the implemented filters with the PSpice simulations.
|
|
|
Analysis of filter structures with controllable amplifiers
Pánek, David ; Langhammer, Lukáš (referee) ; Polák, Josef (advisor)
This bachelor thesis is focused on simulations and practical realizations of already existing frequency filters with modern active components in current mode. New simulation ABM model (Analog Behavioral Model) of DACA (Digital Adjustable Current Amplifier) element was used in the simulations. The first part informs about problems concerning analogue frequency filters. The second part deals with used active components - DACA (Digital Adjustable Current Amplifier), MO-CF (Multiple Output Current Follower), BOTA (Balanced transconductance amplifier) and UCC (universal current conveyor). Four circuits have been chosen and implemented into PCB (printed circuit board) on the basis of simulation results. The first circuit tunes the quality factor with help of DACA component. The second circuit tunes the natural frequency and quality factor with help of DACA components. The third and the fourth circuits are simulated and implemented in differential and also in single ended forms. These circuits tune the natural frequency with help of the same set of current amplification by DACA components. The last part is summary of simulation’s and practical measurement‘s result of this project.
|
|
|
Analogue emulators of fractional-order circuits
Kubát, Pavel ; Langhammer, Lukáš (referee) ; Dvořák, Jan (advisor)
Diploma thesis deals with circuits contain fractional-order elements. The first part of this paper deals with this problem, there were also described methods of design fractionalorder elements and types of circuits containing the fractiona-order elements which can be applied in practice. Used active elements for practical part can be found in the second chapter. Design of GIC circuits and implementation of fractional-order element inside the circuit are shown in the last chapture. Parasitic analysis and stability of frequency filter containing fractional-order element had been also described.
|
guest ::
