|
|
Stability of humic substances
Nováková, Šárka ; Smilková, Marcela (referee) ; Klučáková, Martina (advisor)
This bachelor´s thesis is focused on the study of stability of humic acid. Thesis is divided in two parts, the first part is theoretical. In the theoretical part is dealing with the structure, property and point of humic acid and in the experimental part is dealing with stability of humic acid. The objective of this thesis was to investigate the effect of the extraction agents on stability of humic acid. 1M HCl, 1M MgCl2 and MiliQ water was used like extraction agents. Thermo-oxidative stability was tested trough thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Changes of humic acid that occured after extraction were investigated by FT-IR spektrometry and elementary analysis. The results of the measuring were compared with original humic acid.
|
|
|
Multicomponent Alloys Based on Immiscible Systems Prepared by Powder Metallurgy Route
Adam, Ondřej ; Svoboda, Jiří (referee) ; Sopoušek, Jiří (referee) ; Jan, Vít (advisor)
Immiscible alloys are a relatively well-known group of materials, however, they are still being intensively studied, especially from the point of view of heterogeneous materials with very good mechanical properties, but also electrical properties, for example. The main part of the research deals with cast materials, although in the case of immiscible alloys, there is a risk of liquid separation, which results in the loss of mechanical properties. This dissertation deals with the study of Cu-Fe-based immiscible alloys prepared by powder metallurgy methods. The theoretical part summarizes basic information about immiscible alloys, their microstructure, properties, and production options. The experimental part is first devoted to the choice of the suitable chemical composition of the studied alloys and subsequently to the optimization and influence of the mechanical alloying parameters on the properties of prepared powders. The main part of the experiments contains a complex structural, phase, and thermal analysis of Cu50Fe50 and Cu50(FeCo)50 alloys. In both alloys, a dual-phase ultrafine-grained microstructure was formed after sintering. The most significant of the presented results is the excellent resistance to grain coarsening compared to the other ultrafine-grained materials, where even after sintering at very high temperatures, the average grain size remained below 1 micron. The presumed reason is the immiscible nature of the studied alloys.
|
|
|
Flame retardant treated thermosets for composite materials used in transport industry
Novotný, Kamil ; Kučera, František (referee) ; Poláček, Petr (advisor)
First part of this bachelor‘s thesis contains a literature review, which describes basic mechanisms of flame retardancy, distribution of flame retardants into groups based on their composition and commercially available compounds. Experimental part studied the change of thermal stability and flammability of a thermoset resin with the adition of flame retardants. Change in mechanical properties of the resin was investigated as well. Epoxy resin was selected as a specimen of the resin group due to its excellent properties, which make it widely used in transportation industry. The main disadvantage of epoxy is its high flammability. The effect of two low cost, eco-friendly, easily applicable flame retardants was observed, namely expanded graphite and magnesium hydroxide. Materials were evaluated by a burning test, tensile test and thermogravimetric analysis. Overall, the additives caused a decrease in mechanical properties. Material with a combination of both compounds was found to be the least flammable, but had the worst mechanical properties.
|
|
|
Thermal degradation of hyaluronan
Šimáčková, Marcela ; David, Jan (referee) ; Chytil, Martin (advisor)
This diploma thesis investigated thermal stability and the degradation of hyaluronan (HA) in HA with a molecular mass of 90–130 kDa and in HA with a molecular mass of 1 500–1 750 kDa. The following methods were used for the research: rheology, SEC-MALLS, TGA and DSC. Low-molecular HA was subject to time dependency of degradation investigation, where it was dried at a temperature of 90 °C for a period of 30 minutes and 60 minutes prior to the preparation of the solutions itself. High-molecular HA was investigated not only from the point of view of time but from the point of view of temperature dependency of degradation as well. In the case of investigating the time dependency of degradation, high-molecular HA was dried at a temperature of 75 °C at a time range from 15 minutes to 120 minutes prior to the preparation of the solutions. During the preparation of the solutions for discovering the temperature dependency of degradation, the high-molecular HA was then dried for a period of 30 minutes at a temperature range from 60 °C to 90 °C. For low-molecular HA, thermal stability was proven. Therefore, there is no decrease in the molecular mass and the solutions did not demonstrate a significant decrease of viscosity. For high-molecular HA, thermal stability was not proven. Degradation due to the temperature of drying as well as the time of drying occurred, which was demonstrated by a significant decrease in molecular mass and viscosity of the solutions. While in the case of using a drying temperature of 60 °C, a decrease in the molecular mass occurred by approximately 5 %, the molecular mass decreased by approximately 20 % at a drying temperature of 90 °C compared to undried HA. Due to this reason, high-molecular HA was also further investigated by means of the TGA method, where the decrease of humidity of HA samples in relation to the drying temperature was observed. The DSC method was also used. The objective of the DSC method was to find out temperatures, at which evaporation of humidity contained in an HA sample in relation to its form (undried HA, dried HA and lyophilized HA) occurs. This method further finds out the heat necessary to evaporate humidity from an HA sample. To conclude this research, the results obtained for high-molecular HA were compared with the results of other drying processes – lyophilized proved to be a very gentle drying method because a decrease in the molecular mass for lyophilized HA compared with undried HA almost did not occur.
|
|
|
The effects of vegetative roofs onto the thermal stability of a building object
Majsniar, Michal ; Moudrý, Ivan (referee) ; Vimrová,, Hana (referee) ; TROJAN,, Karel (referee) ; Šťastník, Stanislav (advisor)
Dissertation deals with thermal technical assessment songs vegetation roof with moisture, the more the influence of vegetation on the roof thermal stability of the structure. The aim of this work is to demonstrate the beneficial effect of vegetation roofs, specifically growing Formation of thermo-technical point of view on the favorable temperature conditions in the building. Such speech can be captured only if it is judged-temperature profile dynamically daily operation of real marginal climatic temperatures. Using a stationary or quasi-stationary boundary climatic temperatures which are usually used for the determination of the energy performance of buildings, said effect can not be collected. Demanding simulation calculation, which apply material properties - thermal conductivity, density and thermal capacity, but gives a realistic picture of the thermal processes in progress not only in the roof structure of the building, but also across the entire circuit construction of a building. During the preparation of the dissertation was assembled machine program that works with the energy flow between rooms in the building and the surrounding environment. Furthermore calculates temperature gain of residence of persons, internal lighting and sunlight. The values of the internal environment are calculated from surface temperature, relative humidity, air exchange and, of course, the indoor air temperature with hourly weather data. In constructing the program was included in the calculation of the solar radiation both on flat and on an inclined surface. The output of the energy value and temperature conditions in individual rooms, which include not only thermal insulation but also thermal storage properties of an object. Using experimental measurements were able to demonstrate that the calculated values closely correlate real thermal processes, so it can be demonstrated through the calculated results of the vegetation roof has a favorable effect on the thermal state espe
|
|
|
Study of the electrode materials for Li-Ion accumulators by electron microscopy
Kaplenko, Oleksii ; Čudek, Pavel (referee) ; Kazda, Tomáš (advisor)
The aim of this work is to describe the influence of temperature on the structure and chemical composition of electrode materials for Li-ion accumulators. Theoretical part of this thesis contains described terminology and general issues of batteries and their division. Every kind of battery is provided with a closer description of a specific battery type. A separate chapter is dedicated to lithium cells, mainly Li-ion batteries. Considering various composition of Li-ion batteries, the next subchapters deeply analyzes the most used cathode (with an emphasis on the LiFePO4, LiMn1/3Ni1/3Co1/3O2) and anode materials (with an emphasis on the Li4Ti5O12). The next chapters describe the used analytical methods: electron microscopy, energy dispersion spectroscopy and thermomechanical analysis. The practical part is devoted to the description of the individual experiments and the achieved results.
|
|
|
Analysis of Nanostructures by ToF-LEIS
Duda, Radek ; Král, Jaroslav (referee) ; Mašek, Karel (referee) ; Dub, Petr (advisor)
The presented thesis deals with the utilization of TOF-LEIS analytical method in the area of nanostructure analysis. A new procedure for depth profiling of the elemental composition of the sample, based on the alternate measurement with the DSIMS method, was established. The TOF-LEIS method is able to detect the interface between the layers before its mixing by the ion beam of the DSIMS method. Furthermore, a procedure of TOF-LEIS spektra modification was established to obtain the actual concentration of elements in the sample by reduction of a multiple collision contribution. By comparison of TOF-LEIS spectra with the results received by the DSIMS method the ratio of molybdenum and silicon ion yields was obtained. In the next section advantages of the TOF-LEIS method in combination with XPS during analysis of thermal stability of gold nanoparticles are presented. The mutual complementarity of both methods is shown and final conclusions are supported by electron microscopy images. The final section deals with a newly assembled apparatus for the TOF-SARS analytical method and shows its possibilities regarding the detection of hydrogen on the graphene.
|
|
|
Humic Substances Characterization Employing High Resolution Ultrasonic Spectroscopy
Drastík, Martin ; Franců, Juraj (referee) ; Janoš, Pavel (referee) ; Pekař, Miloslav (advisor)
Předkládaná dizertační práce se zabývá využitím techniky vysoce rozlišovací ultrazvukové spektroskopie (HRUS) při analýze huminových látek, za účelem získání hlubšího vhledu do problematiky vztahu mezi jejich primárními charakteristikami (elementární složení a rozložení uhlíku ve funkčních skupinách) a agregačními vlastnostmi. V literární rešerši jsou shrnuty nejnovější poznatky z oblasti studia huminových látek a představeny základní principy HRUS. Dále jsou uvedeny základní informace z oblasti fraktální analýzy a její aplikace na data získaná pomocí různých metod při studiu huminových látek. První úkol experimentální části je zaměřen na výhodné využití HRUS pro výzkum huminových látek, zde reprezentovaných standardy Mezinárodní společnosti pro huminové látky (IHSS) a to sodnými solemi huminových a fulvinových kyselin. Fulvinové kyseliny v jejich protonované formě byly taktéž zkoumány a to z důvodu objasnění vlivu sodného kationu. Pro popis chování vzorků byla použita mocninná funkce, jejíž empirické parametry byly korelovány s primárními charakteristikami. Byla vytvořena metoda fraktální analýzy a následně byla aplikována na data získána ultrazvukovou spektroskopií. Data získaná pomocí ultrazvukové spektroskopie byla zpracována i alternativní metodou. Ta spočívala v globálním pohledu na závislost ultrazvukové rychlosti na koncentraci a využití lineární regrese. Druhým z cílů práce je získání informací o vlivu teploty na stabilitu agregátů HS (IHSS standardy). Byl zkoumán vliv teplotních gradientů na chování agregátů při čtyřech různých koncentracích. V třetí části práce pak byly zkoumány koncentrační závislosti u vzorků pocházejících především z lokalit příliš nezasažených lidskou činností. HRUS data byla proložena mocninnou funkcí a zkoumána pomocí fraktální analýzy. Takto získané parametry byly korelovány s primárními vlastnostmi. Ze znalosti hustoty při dané koncentraci mohly být stanoveny velikosti hydratačních obálek. Jak se v současné době ukazuje, informace o agregačním chování huminových biomolekul mohou být v budoucnu velmi důležité pro navrhování průmyslových aplikací huminových látek, zejména v zemědělství a v ochraně životního prostředí, ale také například v medicíně.
|
|
|
Energy-efficient hotel building in Karviná
Segeďa, Petr ; Rubinová, Olga (referee) ; Počinková, Marcela (advisor)
The aim of the master’s thesis is to design an energy-efficient hotel in Karviná. In the first part, an architectural and structural solution was proposed. The building has three above-ground storeys. The structural system was designed as structural frame with beams and slabs, made of reinforced concrete. The material of external wall is aerated concrete blocks insulated with the ETICS with poly. The roof is flat. There are 40 thermal collectors and 69 photovoltaics panels. On the first floor, there are four guest rooms, a restaurant, a kitchen, a reception, toilets, a utility room, a mechanical room, and facilities for employees. The guest rooms are located on the second and third floor. HVAC was designed in the second part. Heating is provided by two heat pumps. The first heat pump provides domestic hot water in the winter, heating with radiators, for air handling unit heaters and cooling in the summer. The second heat pump is used only for floor heating in the winter. In the building are designed four air handling units for the kitchen, the restaurant and two for the guest rooms. Rainwater from the roof is collected in accumulation tank for flushing the toilets. In the third part, I evaluated the calculation of energy performance certificate in two softwares, namely Energie 2021 and DEKSOFT. The aim to find out, why the results are different in these softwares. The Drawings were done in ArchiCAD. The calculation part was made in Excel.
|
|
|
METHODS OF POLY-3-HYDROXYBUTYRATE EXTRACTION AND THEIR OPTIMIZATION
Pospíšilová, Aneta ; Plachá,, Daniela (referee) ; Kowalczuk, Marek (referee) ; Přikryl, Radek (advisor)
Poly-3-hydroxybutyrát (PHB) je biolodegradovatelný a biokompatibilní termoplastický polymer se širokou škálou potenciálních aplikací. Výroba PHB typicky zahrnuje fermentaci obnovitelných surovin bakteriemi. Získávání PHB z bakterií je však často náročné a neefektivní. V této práci jsou zkoumány a porovnány různé metody pro získání PHB, včetně digesce, mechanického rozrušení a extrakce. Jsou diskutovány různé optimalizační strategie, které lze použít ke zlepšení účinnosti izolace PHB. Experimentální a výsledková část popisuje snahy o zlepšení metod izolace, zejména kyselé a mýdlové digesce, které byly vybrány jako potenciálně ekonomické, bezpečné a šetrné k životnímu prostředí. Společně s našimi průmyslovými partnery jsme tyto technologie úspěšně otestovali v čtvrtprovozním měřítku a plánuje se další vývoj. Řešily se také možné aplikace a komercializace PHB. Bylo zjištěno, že PHB může nahradit některé mikroplasty v kosmetice a že toto úsilí má potenciál, protože přítomnost mikroplastů v běžných výrobcích je stále vysoká a na úrovni Evropské unie je plánován jejich zákaz. Dále byla studována tepelná stabilita PHB v závislosti na metodě získávání a byly vyvinuty dvě stabilizační metody, které umožnily použít PHB získaný digescí za použití mýdla v materiálových aplikacích.
|
guest ::
