|
|
Targeted Preparation of Composite Based on PP with Inorganic Micro-, or Nanofiller with Different Adhesive Interlayer
Dombková, Julie ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis studies composite of PP and filler particle. As a particle filler was used commercially available CaCO3 (SOCAL 31). The submitted thesis had a goal to find new approaches and technologies of filler surface treatment in order to improve properties of composite materials. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, turbidimetry, infra-red spectroscopy (FT-IR), X-ray diffraction analysis (XRD), scan electron microscopy (SEM), transmission electron microscopy and particle size distribution by laser diffraction. The composites with various volume parts of the fillers were prepared in PIB and studied by short-time tests. Furthermore, the influence of an adhesive layer on fracture mechanical properties of prepared composite was study. Regarding to experimental demand, there was not possible to realize long-term mechanical properties.
|
|
|
Influence of adhesive layer on the mechanical behavior of PP+ inorganic filler composite.
Švestková, Dana ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis was dealt with the study of system PP and particular filler, specifically PPH and like a filler was used commercially available CaCO3 (SOCAL P3). This type of filler is declared by the producer as a filler without surface treatment. The submitted thesis had a goal to find and testing the suitable method and methodology for defined surface treatment of the filler. This is the first step for systematic study of influence the various types of adhesive layer on mechanical properties of declared composite. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, infra - red spectroscopy (FT-IR) and scan electron microscopy (SEM). The composites with various volume part of the fillers were prepared in PIB and studied by short-time tests. Regarding to experimental demand there wasn't possible to realize the whole originally intended program i. e. study of influence the different types of adhesive layer, including to form the model for FEM approach. Nevertheless finding and testing the suitable method of surface treatment is completely basic for the others study. The above mentioned method was used in this application for the first time and it is possible to consider this process like an original approach.
|
|
|
Democratic Spain's fight against gender-baseddiscrimination
Bílková, Kateřina ; Menclová, Barbora (advisor) ; Lukešová, Anna (referee)
This bachelor thesis deals with gender policies adopted in Spain by individual governments in years 1982 - 2018. It analyzes election programs, legislative changes, the emergence of specialized institutions and in some cases the response of Spanish society to these measures. The aim of this work is to record the changes that have occurred in gender policy in Spain after the country's transition to democracy, and especially after the Socialist Party took over the government in 1982 and to find out whether the attitudes of the two main Spanish political parties on this issue differ. The work is divided into four main parts according to individual government periods. These four chapters examine whether the attitude of individual Spanish governments to the issue of women's rights has changed and what each government has emphasized. At the same time, it examines where, on the contrary, it has remained only with populist pre-election promises without the real fulfillment of the set goals. Last but not least, the work also evaluates other societal events and factors which, together with the policies of individual governments, have influenced the position of women in Spanish society on the path to achieving gender equality.
|
|
|
The transformation of the Spanish party system in the context of elections 2015 and 2016
Kleinová, Tereza ; Němec, Jan (advisor) ; Fleissner, Kamil (referee)
This bachelor thesis deals with the transformation of the party system in Spain in connection with the rise of new political parties Podemos and Ciudadanos and parliamentary elections 2015 and 2016. Thesis describes the fragmentation of the Spanish political system which was caused by the results of parliamentary elections. The aim of this thesis is to find the causations why the political parties couldn't form a coalition and have a majority. The first part is about the theory of party systems and theory of coalitions. The second part deals with transformations of the Spanish party system since 1975 and political parties PP and PSOE. The third party is focused on parties Podemos and Ciudadanos, elections 2015 and 2016 and causations of not forming a coalition.
|
|
|
Targeted Preparation of Composite Based on PP with Inorganic Micro-, or Nanofiller with Different Adhesive Interlayer
Dombková, Julie ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis studies composite of PP and filler particle. As a particle filler was used commercially available CaCO3 (SOCAL 31). The submitted thesis had a goal to find new approaches and technologies of filler surface treatment in order to improve properties of composite materials. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, turbidimetry, infra-red spectroscopy (FT-IR), X-ray diffraction analysis (XRD), scan electron microscopy (SEM), transmission electron microscopy and particle size distribution by laser diffraction. The composites with various volume parts of the fillers were prepared in PIB and studied by short-time tests. Furthermore, the influence of an adhesive layer on fracture mechanical properties of prepared composite was study. Regarding to experimental demand, there was not possible to realize long-term mechanical properties.
|
|
|
Influence of adhesive layer on the mechanical behavior of PP+ inorganic filler composite.
Švestková, Dana ; Krčma, František (referee) ; Nezbedová, Eva (advisor)
The diploma thesis was dealt with the study of system PP and particular filler, specifically PPH and like a filler was used commercially available CaCO3 (SOCAL P3). This type of filler is declared by the producer as a filler without surface treatment. The submitted thesis had a goal to find and testing the suitable method and methodology for defined surface treatment of the filler. This is the first step for systematic study of influence the various types of adhesive layer on mechanical properties of declared composite. The plasma discharge behind static pressure was used for the surface treatment of the fillers. These fillers were afterwards analyzed by using of sedimentation analysis, infra - red spectroscopy (FT-IR) and scan electron microscopy (SEM). The composites with various volume part of the fillers were prepared in PIB and studied by short-time tests. Regarding to experimental demand there wasn't possible to realize the whole originally intended program i. e. study of influence the different types of adhesive layer, including to form the model for FEM approach. Nevertheless finding and testing the suitable method of surface treatment is completely basic for the others study. The above mentioned method was used in this application for the first time and it is possible to consider this process like an original approach.
|
|
|
Design and production of a plastic komponent
ČÍŽEK, Václav
The theoretical part is focused on evaluation of chosen ?essential? plastics used in the car industry. The principles of construction and proportioning of plastic components, basic conception of injection moulding and measuration follow. Another section of the theoretical part presents a summary of possible CAD systems, which are used. The practical part is focused on a particular plastic moulding. It includes the main description of a component with its material choice in dependence on the component function. Another section contains evaluation of the component complexity from the viewpoint of moulding, and a possible substitution of constructions, which could be productively simpler, is shown. The whole thesis is completed for better lucidity by pictures, drawings, and mechanical drawings.
|
guest ::
