|
|
Use of FRP Composites as Reinforcing Material for Concrete
Kratochvílová, Denisa ; Prokeš,, Jan (referee) ; Bodnárová, Lenka (advisor)
Because FRP composites have high fiber strength and good durability, they are increasingly used for repairs, modernisation and reconstruction of concrete structures. In practice, however there is a risk of premature separation of FRP reinforcement from concrete. This can be avoided by appropriate selecting the fibers and the matrix and the appropriate shape of the reinforcement. The actual materials and consistency of FRP reinforcement with concrete are also covered by this diploma thesis.
|
|
|
Mechanical properties of fiber reinforced composites for automotive applications
Bayer, Adam ; Žídek, Jan (referee) ; Jančář, Josef (advisor)
Bachelor’s thesis deals with studying mechanical features of fiber composites. As a matrix was chosen PMMA and as reinforcement was chosen glass fabric. Theoretical part sums up contemporary issues of polymer composites in automotive industry such as their production techniques and methods of impregnation. In experimental part were prepared samples by block polymerization of 30 % solution PMMA in monomer with initiator by 65° Celsius warmth oath, when was fabric directly unfolded in pre-polymer solution. On these samples were executed tensile tests by testing device Zwick and these samples were compared with results of theoreticaly calculated values.
|
|
|
Manufacturing Process and Applications of Composite Materials for buses parts
Rusek, Jan ; Julišová, Martina (referee) ; Němec, Karel (advisor)
The aim of the bachelor’s thesis is the evaluation and demonstration of the usability of composite materials in the bus industry. The first chapter provides an overview of selected types of composite materials, basic classification, description of their parts and demonstrations of methods of production. The second part of the bachelor’s thesis is focused on the evaluation of the advantages and disadvantages of using composite materials. The last part is focused on the producion of the sample from fiberglass.
|
|
|
Design of laminate handlebars for mountain bikes
Hanák, Jiří ; Ševeček, Oldřich (referee) ; Polzer, Stanislav (advisor)
This bachelor’s thesis describes design of laminate handlebars for mountain bikes. The first part describes the mechanical properties of composite materials, with the emphasis on fiber composites. The algorithm for acquiring material characteristics of fiber composite by analytical method is presented. In the next part, it is shown how to control the direction of fibers in lam-inate in the finite element calculations and its impact to resulting stresses in the material. The aim of the last part is design geometry model of laminate handlebars for mountain bikes with following stress – strain analysis by FEM and software ANSYS. The analysis is performed for static loading.
|
|
|
Possibilities of dispersed reinforcement for lightweight concrete
Novotná, Aneta ; Žítt, Petr (referee) ; Láník, Jaromír (advisor)
Master´s thesis deals with some problems associated with utilisation of lightweight concrete from the porous aggregates in the load – carrying structures. The thesis focuses on the possibilities of the increase of the cement composites toughness using dispersed reinforcement. Lightweight concretes were reinforced with a combination of different lengths of polypropylene fibers Forta Ferro. There were used polypropylene fibers of three lengths 19, 38, 54 mm. The thesis is divided into theoretical, experimental and static part.
|
|
| |
|
| |
|
|
Sizing of the waves geometrical parameters fabricated on the sheet metal die
Stupárek, Daniel ; Forejt, Milan (referee) ; Samek, Radko (advisor)
This thesis approaches the problem of the return of the original geometric shape of the wave which is created on die panels. Die is used as a structural feature of the fiber-cement roofing material in its shipment in the production line. Based on the study of the theory of cold formed sheet metal determine the actual status in the plant. The method of calibration was designed from the collected informations about the original manufacturer of sheet metal panels. Under this proposal and calculation of the required forming power for the recalibration wave in the factory device for the die calibration was designed and constructed. Equipment calibration was performed on two types of corrugated panels and the result fulfilled the theoretical assumptions. In conclusion is processed technological-economic evaluation and the accompanying drawings.
|
|
|
Cutting forces when drilling fibre reinforced composites
Režný, Tomáš ; Sedlák, Josef (referee) ; Humár, Anton (advisor)
This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, usage, development and production. The aim of this work is complex processing of acquired technical knowledge, and evaluation of technological rehearsals of drilling composite materials which are reinforced by glas fiber and prepreg in terms of the impact of the machined material, wor-king conditions and the tool, and its wear to the feed force value and torque.
|
|
|
Cutting forces when milling fibre reinforced composites
Martének, Libor ; Forejt, Miloslav (referee) ; Humár, Anton (advisor)
The thesis is focused on composite materials with a view to their classifi-cation, identification, usage, current trends in production and development and possibilities of effective machining. As a part of this thesis, there is an evaluation of experimentally measured values during technological testing of milling of a fibre reinforced composite with a polyester matrix reinforced by fiberglass. The technological testing was performed with a view to measure certain values, i.e. impact on machined material, working conditions for a tool and its abrasion equal to the values of components of cutting force. From the values obtained from the testing, a general analysis of cutting force when milling was created containing overall technical and economical evaluation.
|
guest ::
