|
|
Design of structures with FRP reinforcement
Matušíková, Anna ; Vácha, Jaroslav (referee) ; Štěpánek, Petr (advisor)
This diploma thesis presents available FRP software for calculating load bearing capacity of the structures reinforced with FRP and compares them between each other. Furthermore theory and algorithm of my own software is presented here. Load bearing capacity of structures which are reinforced with non-metallic reinforcement and loaded by combination of normal force and bending moment can be solved by my programme. Effects of high temperatures on the concrete structures can be included in the calculation. In the second part of the thesis is calculated load-bearing capacity and deflection of the real beam reinforced with FRP reinforcement and load-bearing capacity of member with FRP reinforcement with effect of elevated temperature. This has been done using my software. Comparison of results from hand calculation and laboratory load-bearing testing is done at the end. This laboratory testing was accomplished by Institute of Concrete and Mansory Structures at our faculty.
|
|
|
Database of material properties
Nagy, Gašpar ; Cipín, Radoslav (referee) ; Janda, Marcel (advisor)
This bachelor’s thesis focuses to create a database of the material properties and user interface for editing these properties. The first part of the project notifies us about the basic characteristics of materials. The next point talks about the materials which are used in electrical engineering to manufacture electrical machines and other appliances. The next part of the bachelor’s thesis describes the database design of material properties. The end of the thesis describes how to use the whole user interface and how it works.
|
|
|
Comparison of certified and lowcost material for stereolithography 3D print
Sobota, Matej ; Zatočilová, Aneta (referee) ; Koutecký, Tomáš (advisor)
The aim of the bachelor’s thesis is to define basic quality parameters and compare material impact on quality of printed products. This is a comparison certified material with low-cost material using SLA-DLP method of 3D printing to reduce production costs. The thesis is focused on the comparison of two different materials based on the results of tensile and hardness tests. The effect of the color of photopolymer on material properties is also observed.
|
|
|
Analisys of the material for laser cutting
Tonkovič, Miroslav ; Kolář, Ladislav (referee) ; Osička, Karel (advisor)
This thesis deals with laser cutting of metal sheets from selected steel producers. The basics of laser technologies, especially in industrial use, are described in the introductory part. There the material requirements are described from the point of view of laser cutting. The comparison of materials from different steel producers is made from different angles in the practical part. The conclusion is dedicated to the evaluation of achieved results.
|
|
|
Dynamic Tensile Test – Material Parameters Determination
Sismilich, Vladimír ; Hadraba, Hynek (referee) ; Severa, Martin (advisor)
The purpose of the work is to summarise todays existing methods of testing materials at high strain rates and techniques of evaluation acquired experimental data. There are shown the most important dynamic materials characteristics, by which is able to describe material behaviour at high strain rates. Dynamic tensile test on Eurofer’97 steel at loading rate 1m/s was conducted experimental data were analysed and evaluated. In the evaluation The most important strain and stress properties of this steel were determined.
|
|
|
Unstability cut of laser beam at dividing limiting gauge thickness
Kadlec, Zdeněk ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This thesis deals with the possibilities of cutting strong steel metal sheets by means of laser and problems rising from the incision, their technological investigation. The basic philosophy consists on the research of the interaction between laser bunch and material, depending on the position of focal poin and sequential results in spec. heat. It determines the main parametres of the incision (from the total quantities and matematical description) which have the biggest effect on the occurence of wide cut and perhaps even on the quality of products and consequential optimalization of these quantities.
|
|
| |
|
|
Návrh interiérového prvku s využitím materiálu Jesmonite
Slyshko, Liliia
The topic of the bachelor's thesis is the expansion of knowledge about the composite material Jesmonite and its use in furniture creation. The work is primarily focused on the material characteristics of the composite and the analysis of its physical and mechanical properties, such as bending characteristics, toughness, hardness, and light fastness. A table lamp was chosen as an interior element, which fulfills both a lighting and a decorative function. The theoretical part contains a basic overview of composite materials and deals with the technical parameters of light sources. Part of the practical part is the own design of the element, which was processed in the form of drawing documentation, visualization of the product and its price calculation. At the end, there is an evaluation of the performed tests. The contribution of the work is a comparison with other composite materials and recommendations for scientific and practical use.
|
|
|
Durability testing of replaceable inserts in cylindrical turning of carbon steel
Smolík, Martin ; Vítek, Jiří (referee) ; Sedlák, Josef (advisor)
The thesis deals with the problems in the field of durability testing of replaceable inserts for longitudinal steel turning. The main objective of the thesis is the analysis of the cutting process based on the results of the performed cutting tests. The cutting tests will be carried out comparatively by testing pairs of inserts, compared to each other. Wear observation is carried out by optical method using a workshop microscope and special software designed to process the acquired images. The output of the work will be an illustration of the different behaviour of the standard and the upgraded set of cutting inserts under different configurations of cutting conditions. The work provides a comprehensive view of the cutting tool testing process and quantifies the degree of influence of the various factors entering into the cutting edge wear process.
|
|
| |
guest ::
