National Repository of Grey Literature 13 records found  1 - 10next  jump to record: Search took 0.05 seconds. 
Heat exchanger design for heat pump
Tvrdý, Radek ; Toman, Filip (referee) ; Baláš, Marek (advisor)
This thesis deals with the design of a heat exchanger for a heat pump, specifically a condenser. In the introductory part, a brief research of heat pumps, refrigerants and their classification is made with a focus on the types of heat exchangers used. In the next part, the design of a shell and tube and plate condenser for a ground-to-water heat pump is made and then the two options for the heat exchanger are compared and an assessment is made as to which of the options is more suitable.
Improvement of power efficiency of co-generation units
Pokorný, Vojtěch ; Škorpík, Jiří (referee) ; Pospíšil, Jiří (advisor)
In this masters thesis are discusses the possibilities of increasing the electrical efficiency of cogeneration units with an internal combustion engine with the power output 800 kWe. Technical and economical aspect the connection with steam turbine, steam engine and ORC turbine is compared. It include the design of heat exchanger for ORC cycle.
Design of high-pressure heat exchanger
Marada, Petr ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
The aim of the thesis is to design a heat exchanger for heating natural gas in the mining process and subsequent treatment. The first part describes natural gas itself, its origin, mining and ways of treatment. There are described technologies used for finding the deposits itself or processes by which water, sulfur and solid particles are removed from the extracted gas. The next section deals with the types of heat exchangers most commonly used in industry. There are also described basic relations for heat-hydraulic calculation of heat exchanger. In the practical part the heat exchanger itself was designed. World-wide HTRI software was used for the heat-hydraulic calculation and for strength calculation according to the standard ČSN EN 13445 was used sofware Sant´ Ambrogio.
Heat exchangers, influence of cycle efficiency
Khůlová, Jitka ; Štěpánová, Lenka (referee) ; Fiedler, Jan (advisor)
The master's thesis deals with district heat exchangers in a thermal steam cycle of combined heat and power plants and with types of condensate cascades in the multilevel heating systems. Calculation of the thermal efficiency of electricity generation is provided for the investigated thermal cycle, which was modified for three different types of cascades. Besides that, a comparison of useful electric power and electricity generation through one year period of working is made. A significant part of the work is devoted to the design of district heat exchangers, including the calculation of thermal power and heat transfer area. Main dimensions are proposed for each exchanger together with a basic drawing.
Heat exchanger design for waste air heat recovery
Valentová, Helena ; Toman, Filip (referee) ; Baláš, Marek (advisor)
The master’s thesis deals with heat recovery from waste air in a multifunctional hall. The thesis contains a theoretical part that shows required parameters of an indoor environment, a composition of an air handling unit and a description of its individual parts suitable for this purpose. Subsequently a design calculation of a rotary heat exchanger and a plate heat exchanger is made. The calculation contains geometry, heat transfer and pressure drop. Then the heat exchangers are compared and a more suitable option for this application is chosen. Further the thesis includes drawing documentation of both types of heat exchangers.
Heat exchanger design
Vítek, Tomáš ; Lisý, Martin (referee) ; Špiláček, Michal (advisor)
This bachelor thesis deals with the design of an additional flue gas exchanger for the use of residual energy of flue gas. Part of the work is a summary of the knowledge about heat exchangers, their principle, operation and maintenance. The next part of the thesis is the calculation draft of the heat exchanger, calculation of heat transfer and subsequent calculation of hydraulic losses for the designed exchanger. Part of the bachelor thesis is a drawing documentation of the designed exchanger too.
Replacement of existing heat exchanger
Vaculík, Štěpán ; Toman, Filip (referee) ; Baláš, Marek (advisor)
This thesis deals with the possibilities of replacing an existing inefficient heat exchanger with a new one. In the first theoretical part a research of heat exchanger types, their operational features and suitable application is carried out. In the second practical part, the control calculation of the existing bundle heat exchanger with U-tubes is performed first, followed by the thermo-hydraulic design of a new bundle heat exchanger with straight tubes and a new plate heat exchanger. In the last part of the work, a comparison and assessment of which of the alternatives is the most suitable is made.
Heat exchanger design
Los, David ; Lachman, Jakub (referee) ; Baláš, Marek (advisor)
This bachelor's thesis deals with the design of a heat exchanger for the use of residual energy from flue gases from fireplace stoves. Part of the work is a brief description and overview of heat exchangers used in industry, including a chapter on flue gas exchangers. The work also includes a simple conceptual design of the heating circuit of a family house and the following choice of heat exchanger type. The conceptual design is followed by the design of the geometry of the exchanger, the determination of the size of the heat exchange surface and the calculation of pressure losses. The thesis also includes drawing documentation.
Heat exchanger design for waste air heat recovery
Valentová, Helena ; Toman, Filip (referee) ; Baláš, Marek (advisor)
The master’s thesis deals with heat recovery from waste air in a multifunctional hall. The thesis contains a theoretical part that shows required parameters of an indoor environment, a composition of an air handling unit and a description of its individual parts suitable for this purpose. Subsequently a design calculation of a rotary heat exchanger and a plate heat exchanger is made. The calculation contains geometry, heat transfer and pressure drop. Then the heat exchangers are compared and a more suitable option for this application is chosen. Further the thesis includes drawing documentation of both types of heat exchangers.
Design of high-pressure heat exchanger
Marada, Petr ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
The aim of the thesis is to design a heat exchanger for heating natural gas in the mining process and subsequent treatment. The first part describes natural gas itself, its origin, mining and ways of treatment. There are described technologies used for finding the deposits itself or processes by which water, sulfur and solid particles are removed from the extracted gas. The next section deals with the types of heat exchangers most commonly used in industry. There are also described basic relations for heat-hydraulic calculation of heat exchanger. In the practical part the heat exchanger itself was designed. World-wide HTRI software was used for the heat-hydraulic calculation and for strength calculation according to the standard ČSN EN 13445 was used sofware Sant´ Ambrogio.

National Repository of Grey Literature : 13 records found   1 - 10next  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.