|
|
Thermodynamic 1-D model of the turbocharger of an internal combustion engine
Mrázková, Kristýna ; Böhm, Michael (referee) ; Štětina, Josef (advisor)
Master thesis deals with 1D heat transfer simulation of turbine housing laying emphasis on temperature of exhaust gas leaving the turbine. The thesis covers construction and thermodynamics of turbochargers, exhaust gas aftertreatment and heat transfer simulation software. Then the thesis focuses on exploring turbine housing 3D model discretization, building physical turbocharger model for 1D simulation of exhaust gas output temperature and heat transfer through turbine housing. Heat transfer coefficients were calibrated for transient simulation predicting temperature of output exhaust gas in compliance with NEDC cycle. Results analysis and optimization follow, a suggestion on model integration into the virtual turbocharger system is also included.
|
|
|
Comparison of Hybrid Powertrain Topologies in Daily Commuting Regime
Ušiak, Michal ; Štětina, Josef (referee) ; Vondrák, Adam (advisor)
The master’s thesis deals with modelling of various architectures of hybrid powertrains for three vehicle sizes in GT-SUITE and compares them in daily commuting operating mode. On top of making of the hybrid vehicle simulation models, control algorithms had to be created to manage the energy split between the internal combustion engine and the electric motor for each of the architectures. Routes to work and back were logged using the GPS and postprocessed to obtain the speed and the road grade profiles. Resulting data was used as an input in simulations of daily commuting. To compare all hybrid powertrain architectures, fuel economy and electricity consumption were evaluated for WLTP and daily commuting operating modes. Finally, the environmental impact of each topology was assessed based on an estimation of corresponding well-to-wheel emissions.
|
|
|
Powertrain of four-cylinder in-line gasoline aircraft engine
Novák, Vít ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The focus of this work is to determine the stress of the crank mechanism of the inverted piston aircraft engine Walter Mikron III C UL from the manufacturer PARMA - TECHNIK, s.r.o. The main method of calculation is the numerical finite elements method using the program ANSYS Workbench, the module Static structural and Transient structural. The approximate indicated cylinder pressure during the duty cycle was determined in the GT-SUITE software. The partial goals are to propose possible modifications in the construction of the crank mechanism and to state the possible power reserves of the engine. The diploma thesis also briefly summarizes the history and development of aircraft piston engines from the company Walter, which developed the engine, and the line of Walter Mikron engines.
|
|
|
Thermodynamic 1-D model of the turbocharger of an internal combustion engine
Mrázková, Kristýna ; Böhm, Michael (referee) ; Štětina, Josef (advisor)
The thesis deals with 1D heat transfer simulation of turbine housing laying emphasis on temperature of exhaust gas leaving the turbine. The thesis covers construction and thermodynamics of turbochargers, SCR catalysts and 1D simulation software. Then the thesis focuses on exploring turbine housing 3D model discretization, building physical turbocharger model for 1D simulation of heat transfer through turbine housing with time dependent input values and predicting temperature of exhaust gas flowing through turbine outlet in compliance with NEDC cycle. Result analysis and a suggestion of subsequent actions follow.
|
|
|
Thermodynamic 1-D model of the turbocharger of an internal combustion engine
Mrázková, Kristýna ; Böhm, Michael (referee) ; Štětina, Josef (advisor)
Master thesis deals with 1D heat transfer simulation of turbine housing laying emphasis on temperature of exhaust gas leaving the turbine. The thesis covers construction and thermodynamics of turbochargers, exhaust gas aftertreatment and heat transfer simulation software. Then the thesis focuses on exploring turbine housing 3D model discretization, building physical turbocharger model for 1D simulation of exhaust gas output temperature and heat transfer through turbine housing. Heat transfer coefficients were calibrated for transient simulation predicting temperature of output exhaust gas in compliance with NEDC cycle. Results analysis and optimization follow, a suggestion on model integration into the virtual turbocharger system is also included.
|
|
|
Thermodynamic 1-D model of the turbocharger of an internal combustion engine
Mrázková, Kristýna ; Böhm, Michael (referee) ; Štětina, Josef (advisor)
The thesis deals with 1D heat transfer simulation of turbine housing laying emphasis on temperature of exhaust gas leaving the turbine. The thesis covers construction and thermodynamics of turbochargers, SCR catalysts and 1D simulation software. Then the thesis focuses on exploring turbine housing 3D model discretization, building physical turbocharger model for 1D simulation of heat transfer through turbine housing with time dependent input values and predicting temperature of exhaust gas flowing through turbine outlet in compliance with NEDC cycle. Result analysis and a suggestion of subsequent actions follow.
|
|
|
Powertrain of four-cylinder in-line gasoline aircraft engine
Novák, Vít ; Kaplan, Zdeněk (referee) ; Píštěk, Václav (advisor)
The focus of this work is to determine the stress of the crank mechanism of the inverted piston aircraft engine Walter Mikron III C UL from the manufacturer PARMA - TECHNIK, s.r.o. The main method of calculation is the numerical finite elements method using the program ANSYS Workbench, the module Static structural and Transient structural. The approximate indicated cylinder pressure during the duty cycle was determined in the GT-SUITE software. The partial goals are to propose possible modifications in the construction of the crank mechanism and to state the possible power reserves of the engine. The diploma thesis also briefly summarizes the history and development of aircraft piston engines from the company Walter, which developed the engine, and the line of Walter Mikron engines.
|
|
|
Comparison of Hybrid Powertrain Topologies in Daily Commuting Regime
Ušiak, Michal ; Štětina, Josef (referee) ; Vondrák, Adam (advisor)
The master’s thesis deals with modelling of various architectures of hybrid powertrains for three vehicle sizes in GT-SUITE and compares them in daily commuting operating mode. On top of making of the hybrid vehicle simulation models, control algorithms had to be created to manage the energy split between the internal combustion engine and the electric motor for each of the architectures. Routes to work and back were logged using the GPS and postprocessed to obtain the speed and the road grade profiles. Resulting data was used as an input in simulations of daily commuting. To compare all hybrid powertrain architectures, fuel economy and electricity consumption were evaluated for WLTP and daily commuting operating modes. Finally, the environmental impact of each topology was assessed based on an estimation of corresponding well-to-wheel emissions.
|
guest ::
