|
|
Optical Network Design in Revúca
Antalík, Dominik ; Jordán, Vilém (referee) ; Ondrák, Viktor (advisor)
Bachelor thesis is focused on the optical network design with a variant termination of the optical fiber in the home of end users. The technology is currently the most advanced bandwidth sufficient for reliable transmission of any kind of content. The investor is the local internet provider FERDINANDY, s.r.o. in Revúca. The optical network design is set for this city. This innovation will provide high speed connection and offers additional service options such as IPTV or VoIP for citizens of Revúca. The bachelor thesis includes a proposal route of the optical fibers, choice of active and passive equipment and economic assessment of the payback period of large investments.
|
|
|
Optimization of access networks for multimedia services
Slavíček, Tomáš ; Reichert, Pavel (referee) ; Šporik, Jan (advisor)
This thesis describes the problems of access networks and their existing types. It discusses the important parameters for multimedia services. It considers the possibility of using various networks at the localities. It presents modern multimedia services and their requirements for access networks. Next step describes the possible use of QoS to optimize access networks used for multimedia services. Multimedia services to different types of networks and limits which these types of networks have, are simulated in the program Opnet Modeler. Measurements of values important for securing quality of services are implemented at selected real access networks. In conclusion, the results of simulations and measurements are subjected to comparative analysis.
|
|
|
Analysis of optical access networks in the Czech Republic
Štefančík, Matej ; Šifta, Radim (referee) ; Münster, Petr (advisor)
The work provides an introduction to optical access networks. Describes the basic functional units, the architecture of these networks, defines the basic network elements. Discusses various construction technologies from classic to modern. The next chapter analyzes optical access networks in the Czech republic. Focused on actual status of these networks, based on statistical data. An important part is the future direction of development over the next few years. The new trends and ideas that appear in this field. At the end of the chapter was summarized anonymous survey conducted through a questionnaire sent to the owner of the optical access networks, the output of which were the parameters of the networks. All collected data served as a source for design creation of the standard variants of optical access networks along with the technical specifications and financial balances. For individual network designs were developed models in the simulation environment used for the analysis. The last chapter briefly compared strengths and weaknesses of created variants of the optical access networks.
|
|
|
The Project Proposal for Building an ISP Network
Kovács, Benjamín ; Holík, Milan (referee) ; Ondrák, Viktor (advisor)
The subject of the „The project proposal for building an ISP network“ thesis is the analysis of a current state of internet connectivity in a city of Komarno as well as a project proposal of a new network infrastructure for an internet service provider. The analysis consists of the current state of infrastructure and a possibilities of building new ISP network infrastructure. This thesis also contains brief summary of a required technologies and a description of project management, including project risk analysis, time schedule and cost calculation.
|
|
|
Effect of optical connectors quality on transmission
Bernkopf, Miroslav ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
This diploma thesis deals with optic fiber connectors and their influence on transmissions realized via fiber optics. Optical fibers and lightguides play the key role in telecommunications because of constant demands of higher bandwidth and data rates. Original metalic wires do not meet market requirements and so the fiber optics are more and more being used. There are various types of fibers and there are also many ways of connections. This work deals with demountable way of connection – optical connectors, which have the biggest influence on a total attenuation and route length. Connector has to meet various requirements such as cleannes, quality, mechanical construction and ferrule polishing.
|
|
|
Parameters of FTTx Networks
Münster, Petr ; Křepelka, Václav (referee) ; Vlček, Čestmír (referee) ; Filka, Miloslav (advisor)
This thesis examines parameters of FTTx networks and possibilities for increases in limit values of some selected parameters. The first and second chapters describe the necessary theory for understanding the outcomes presented in the rest part of the work. In the practical part of this thesis, analysis of the condition of the optical fibers in the Czech Republic is provided. Based on the results, the impact of the polarization mode dispersion on optical access networks was assessed. The next part of this thesis is focused on the active optical networks design, depending on the cost of implementation and operating costs. The main limiting parameters of the current passive optical networks are bandwidth and insertion loss of the optical distribution network. To increase the bandwidth a system based on optical time-division multiplexing with a bandwidth of 1.28 Tbit/s has been designed and created. By using polarization division multiplexing technique the system is also more tolerant to dispersions. In the last part of this thesis, a remote amplification system was verified by measurement and simulation. Based on the obtained results, a NG-PON2 network with a functional remote amplification system with a gain of more than 10 dB has been designed in the OptiSystem software.
|
|
|
Design of FTTx optical access network
Münster, Petr ; Tejkal, Vladimír (referee) ; Reichert, Pavel (advisor)
The aim of this work is an overview of the proposal for FTTx Optical Access Networks. In the introductory chapter written about the optical fiber and the transmission. Furthermore, as already discussed various options with regard to the implementation instead of the end of optical fiber - FTTN, FTTC, FTTP, FTTB, FTTH and standards, which are used to build fiber optic networks. The next chapter is an overview of the network elements that are in different layers reference model ISO / OSI used. The final theoretical chapter is devoted to progressive technologies for the construction of optical access networks, which has recently been used. Concepts are explained as HDPE pipe, microtubing or self-supporting cables. The practical part design model, passive optical networks in the area Slavičín, located in the Zlín region. FTTB architecture was chosen, where for each connection object is used in the existing copper lines. The proposed route will use a standard technology GEPON Wavelength division WDM, so to connect the individual buildings will be used only one thread. Realization of optical networking technology will be excavation. The optical cables and optical fiber bundles are protected by HDPE pipes stored in the bed of sand. For the optical signal split into multiple lines will be used by an optical splitter 1 / 16, located in an outdoor cabinet optic pathway. The distribution of signals for the settlement will take care Alloptic central station, which is optimized for the transmission of Triple Play services. On the basis of the proposal is to created a financial analysis that shows the return on the project. An important part of the network is also monitoring the network. The last part of this work therefore deals with the possibilities of monitoring networks in order to continuously monitor the network, in order to prevent any disturbances or quickly respond to network problems.
|
|
|
FTTB Network Design
Reichert, Pavel ; Křepelka, Václav (referee) ; Filka, Miloslav (advisor)
The purpose of this master’s thesis is to explain the issues of the FTTx network design. The main idea of this work is to describe to readers the methods of the designing the optical access networks. Especially we will speak about the building technologies and different topologies used in a practice. The different technologies of optical access networks’ building and various parameters, which are necessary to take into account in the designing of these networks, will be introduced. In the theoretical part, methods of measurement, which are like the needed part of each optical access networks’ building, will be described. Two purposes of the FTTB networks with all proprieties will be made and offered. One purpose will be solved by Point to Point topology and the second purpose will be solved by Point to Multipoint topology. Following the confrontation one of these purposes will be chosen and realized. By ITU recommendation, measurements will be performed on the built optical trace. The final protocols will be elaborated from these measurements. The built trace with all final reports will be prepared for assignment to the subscriber.
|
|
|
Measuring methods of key parameters in optical networks
Balon, Jiří ; Reichert, Pavel (referee) ; Tejkal, Vladimír (advisor)
The main goal of the master’s thesis was to familiarize with optical networks dilemma and its measuring during fabrication. The whole thesis is divided into several parts where the first part deals with optic fiber dilemma. It describes its kinds, properties and also suggests a basic principle of optic signal dispersion using these fibers. It describes also optical network FTTx architecture (Fiber To The x). The second part of the thesis focuses on methods of measuring key parameters of optical networks. Is brings out the methods of measuring optical loss and dispersive influences. The last and final part in focused on creating a methodical manual for measuring these networks during its fabrication and verifying measuring methods stated in the theoretical part inside a real network. Measuring was implemented on an optical network of Masaryk University in Brno.
|
|
|
Media Converters and Optical Switches
Branč, Martin ; Reichert, Pavel (referee) ; Münster, Petr (advisor)
This Master´s thesis provides an overview of wired networks, its parameters, used standards and the deployment possibilities. Moreover, it includes the overall overview about optical networks, its parameters, maximum bandwidth, reachable distances as well as the advantages and disadvantages in comparition with wired networks. The project describes network elements which are used in the optical access network such as media convertors, optical switches etc. The practical part includes results of testing of the network devices in various scenarios. To get a comparable result, the real throughput, the power of each device and compatibility of devices from different producers were measured. At the end I have suggested few scenarios with the usage of optical switches and media convertors for extension of the current optical network. The calculation of costs for building and operation of the network is also included.
|
guest ::
