|
|
Impedance Transformers with Impedance Ratio 1/50 Ohms for Wide Frequency Range
Zachar, Jiří ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
One of the aims of this bachelor’s project was to explore possibilities of the design of impedance transformers for a very wide frequency bandwidth (10 Hz – 100 MHz) with the impedance ratio 1/50 . It is not possible to cover this wide frequency band by one transformer, so the design was split into the design of two impedance transformers. The first transformer was realized on the ferrite coil RIK20. The second transformer was realized by with the components T16-1 and TT25-1-kk+ produced by Mini-CircuitsŽ company, and transform impedance directly in a high frequency range. The performance of realized transformers was approved by measuring transformed impedance on their outputs. The frequency band of transformers was determined from these data. Their insertion loss was also measured. The last part of this work was focused on measuring the insertion loss of EMI filters. The main task was to compare the impedance systems 1 /100 and 0,1 /100 and vice versa. The insertion loss was measured for several chosen EMI filters. The insertion loss of all filters reached approximately the same values for both impedance systems.
|
|
|
Analysis of the Parasitic Bonds in the RFI Filters
Pišťák, Ondřej ; Vyskočil, Pavel (referee) ; Dřínovský, Jiří (advisor)
These diploma thesis deals with analysis of parasitic elements of EMI filters. It is desirable that the attenuation characteristics can be predicted with the help of the known filter’s schematic even at higher frequencies, where the parasitic elements of the passive components have to be taken into account. The analysis also includes the creation of real circuitry of an EMI filter. The component values are estimated according to this basic model.
|
|
|
Measurement of three-phase EMC filters
Tomašák, Lukáš ; Soldán, Josef (referee) ; Dřínovský, Jiří (advisor)
The aim of this semestral project was to propose the measuring system for measuring three-phase EMI filters in symmetrical, asymmetrical and non-symmetrical mode according to information from supplier of the filters. The major part of this project was focused on measuring the frequency dependence of the insertion loss of three-phase EMI filters in impedance systems 50?/50?, 0,1?/100 ? and 100?/0,1?. It was determined that results approximately agree with specifications in datasheets.
|
|
|
Impedance Transformers with Impedance Ratio 1/50 Ohms for Wide Frequency Range
Zachar, Jiří ; Šebesta, Jiří (referee) ; Dřínovský, Jiří (advisor)
One of the aims of this bachelor’s project was to explore possibilities of the design of impedance transformers for a very wide frequency bandwidth (10 Hz – 100 MHz) with the impedance ratio 1/50 . It is not possible to cover this wide frequency band by one transformer, so the design was split into the design of two impedance transformers. The first transformer was realized on the ferrite coil RIK20. The second transformer was realized by with the components T16-1 and TT25-1-kk+ produced by Mini-CircuitsŽ company, and transform impedance directly in a high frequency range. The performance of realized transformers was approved by measuring transformed impedance on their outputs. The frequency band of transformers was determined from these data. Their insertion loss was also measured. The last part of this work was focused on measuring the insertion loss of EMI filters. The main task was to compare the impedance systems 1 /100 and 0,1 /100 and vice versa. The insertion loss was measured for several chosen EMI filters. The insertion loss of all filters reached approximately the same values for both impedance systems.
|
guest ::
