|
|
Cable-supported bridge
Adler, Filip ; Glovina, Filip (referee) ; Nečas, Radim (advisor)
The subject of this master thesis is to design a pedestrian bridge supported by cables. There are three variants of studies created for this case and for most suitable one, all documentations were produced. The primary focus of this work is on static design solution with an output of several drawings. Static model for results from load cases included construction stages and was created in Midas Civil. Design and checks were performed by hand calculations, complemented by checks of several sections by IDEA StatiCa software. Analysis and calculations are compliant to up-to-date codes and respect the fundamentals of analysis due to limit states.
|
|
|
Pedestrian bridge across the lagoon
Bezručová, Kristína ; Kaláb,, Pavel (referee) ; Nečas, Radim (advisor)
The aim of this thesis is the design and analysis of pedestrian bridge across the lagoon. Three variants were designed. The variant of structure, which combines stress ribbon with steel arches, was chosen for analysis. There is a chapter in this thesis which deals with an ideal shape of arches for different types of loads. The calculation of load effects was made in software Ansys 17.0, considering scnstruction stages. Ultimate limit state and state limit state are evaluated. For evaluation of concrete cross sections was used MS Excel. Steel cross sections were evaluated in software Ansys 17.0. d Dynamic behaviour of construction was assessed. The mode shapes and natural frequencies were calculated. The harmonic excitation response was studied. The loss of stability was checked. The design and assessment are according to the european standards.
|
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Dynamic analysis of bridge construction
Kinclová, Radka ; Nevařil, Aleš (referee) ; Vlk, Zbyněk (advisor)
The objective of this diploma thesis is a dynamic analysis of a cable-stayed walkway. The RFEM structural analysis software is used for the calculation. Design principles of the structure are explained and analysis of the construction phases is then performed. The eigenmodes of the structure are calculated for various material combinations. The thesis examines the effects of moving loads and earthquake effects using several different methods. A comparison of the various loading effects on the structure and also the calculation methods is presented at the conclusion.
|
|
| |
|
|
Multi-span double teebridge
Alušic, Michal ; Řeřucha, Kamil (referee) ; Koláček, Jan (advisor)
Main purpose of the diploma thesis is to design a multi-span double-girder bridge which spans the valley of a river. The bridge spans main road of 1st class. Main superstructure of a bridge is made of prestressed concrete which is built span by span. Structure was designed according to limit states in construction stages as well as during the service. Everything was designed according to the latest European normatives. It contains static calculation and drawing documentation.
|
|
|
Continues concrete bridge structure on the expressway R2
Horut, Jakub ; Sliwka, Pavel (referee) ; Koláček, Jan (advisor)
The subject of master thesis is expressway R2 in Slovakia through a valley. Height of the construction is limited by a railway line and a local road. From two designed variants was chosen one and futher examined. The span lenght of bridge fields is 24,5 +5 x 30+24,5m. The structure was designed according to ultimate and serviceability limite states and construction stages were considered in model. In master thesis was processed structural design report, drawnings, visualization and engineering report.
|
|
|
Design of prestressed bridge near Nitra
Komárková, Petra ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
This Master’s thesis concerns a design of the highway bridge over Nitra River in Nitra, Slovakia. Three variants were designed from which one was selected and analyzed in detail. It is a three box cell girder made of post-tensioned concrete and constructed as a free cantilever bridge. The bridge is assessed according to Eurocodes. The limit states for persistent and transient design situations were taken into account at carrying out the design. There are drawings attached to this thesis as illustrative drawings of the bridge and its construction stages, drawings of the prestress tendons and reinforcement.
|
|
|
Roof of the swimming pool
Pelikán, Adam ; Šopík, Leonard (referee) ; Stráský, Jiří (advisor)
This diploma thesis is about designing the structure of roof of swimming stadium. Three solutions are created - concrete arc with tie, steel truss slab and concrete pretensioned membrane. One choosed solution - concrete pretensioned membrane - is afterwards developed. In the beginning there are several designs of geometry fulfilling the requirements for given type of structure being created. In part of static calculation, the parametrical mathematical model in form of macro in APDL language for Ansys software has been created. Afterwards all the parameters (initial state of cables, level of pretension, dimensions of membrane and peripheral frame, etc.) has been optimized in order to the membrane be fulfilling criterias for ultimate limit state and serviceability limit state. Afterwards other selected parts of structure has been checked. On basis of designed geometry and design checks in static calculation the drawings of conctruction and designed parts has been created. In the end, the 3D model of the structure has been created in graphical software Rhinoceros. Then visualizations of structure in concstruction stages and after completion has been rendered.
|
|
|
Analysis of membrane structures with respect to construction stages
Zajac, Zbyněk ; Kytýr, Jiří (referee) ; Lang, Rostislav (advisor)
This diploma thesis deals with problem of design and calculation of membrane structure. Design proces of light and airy structure was demonstrated on conical shaped roof in the finite element analysis program RFEM. The structure was loaded in the virtual wind tunnel in the program RWIND. Results were compared with the values given in the literature. A comprehensive guide for the design of membrane structures has been created. Subsequently, the influence of design stages on the internal forces was demonstrated. Membrane structures are very sensitive to construction stages, because it is not possible to prestress all membrane surfaces at once. Program by DLUBAL software s.r.o. was used for form-finding analysis during construction stages.
|
guest ::
