|
|
Conducting connections of ceramic with FR4 in 3D structure
Pelc, Miroslav ; Adámek, Martin (referee) ; Kosina, Petr (advisor)
This work deals with conductive connections ceramic substrate with FR4 into three – dimensional structure. High frequency amplifier was created on ceramic substrate as a concrete application, for check quality substrate on resulting behavior circuit. The supply voltage for this amplifier is provided by the DC voltage source developed for FR4. Further the thesis deals with quality verification of substances conductive connection and individual aspects, with affect resulting reliability of connection.
|
|
|
The optimization of phosphate binders compozition used for refractories
Kalousová, Hana ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
This thesis deals with optimization of the composition phosphate binders. These binders are used in production of refractories. In this branch, the bauxite is very often used as an aggregate, but it contains tiny particles of iron which arise in milling process. These particles of iron react with the phosphate binder to form hydrogen – it is consequence of the reaction between phosphoric acid and iron. The formed gas causes the formation of bubbles and the deformation of refractories. The goal of this thesis is to find suitable additives which can be used to stop or to limit the production of hydrogen. Usually used binders were replaced by a model binder to simplify the system and for better understanding. The model binder was prepared in laboratory by dissolving aluminium hydroxide in phosphoric acid. They used pure powdered pentacarbonyl iron instead of tiny iron particles from the milling process. The model binder was modified with using a few inhibitors. The calcimetr was used to measure their influence on the production of hydrogen, as well as measuring concentrated rows of selected inhibitors. These rows are necessary to optimize the inhibitors quantity added in the binder.
|
|
|
On the milling of ceramic materials
Rudel, Václav ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
In the diploma thesis dividing of ceramic materials is made, their bonds and other attributions, which define ceramic materials. There is also described how ceramic materials are manufactured and the thesis is including information about machining ceramic materials. In the experimental part sample of ceramic material R-S67K was machined by milling. During the experiment cutting forces were measured and roughness of surface after finishing, these data were finally evaluated.
|
|
|
Additional components of feldspar deposit of Krásno Krásno - Vysoký Kámen: composition and relation to the feldspar material
Vrbický, Tomáš ; Přikryl, Richard (advisor) ; Štemprok, Miroslav (referee)
The Krasno deposit is only one active mine at Slavkovsky les. Mined are feldspars raw materials with high quality, commonly used in ceramic and glass industry. Mined raw material has a lot of additional components, which has influence on quality of raw material. Main additional components are unwanted coloring Fe oxides. Another additional components are apatite and topaz, which dont have influence on quality of raw material. The most interesting additional components of raw material are Ta - Nb, Li - Rb minerals. Currently the processing of raw material is under modernization for maximal separation high quality of feldspar material. The result of semi-processing operation shows the concentrate can be potential source of strategic raw materials as Nb - Ta or Li - Rb mineralization. For separation of these minerals and elements must be realized detailed research of selected processing and properties of these minerals. Powered by TCPDF (www.tcpdf.org)
|
|
|
On the milling of ceramic materials
Rudel, Václav ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
In the diploma thesis dividing of ceramic materials is made, their bonds and other attributions, which define ceramic materials. There is also described how ceramic materials are manufactured and the thesis is including information about machining ceramic materials. In the experimental part sample of ceramic material R-S67K was machined by milling. During the experiment cutting forces were measured and roughness of surface after finishing, these data were finally evaluated.
|
|
|
Conducting connections of ceramic with FR4 in 3D structure
Pelc, Miroslav ; Adámek, Martin (referee) ; Kosina, Petr (advisor)
This work deals with conductive connections ceramic substrate with FR4 into three – dimensional structure. High frequency amplifier was created on ceramic substrate as a concrete application, for check quality substrate on resulting behavior circuit. The supply voltage for this amplifier is provided by the DC voltage source developed for FR4. Further the thesis deals with quality verification of substances conductive connection and individual aspects, with affect resulting reliability of connection.
|
|
|
The optimization of phosphate binders compozition used for refractories
Kalousová, Hana ; Ptáček, Petr (referee) ; Opravil, Tomáš (advisor)
This thesis deals with optimization of the composition phosphate binders. These binders are used in production of refractories. In this branch, the bauxite is very often used as an aggregate, but it contains tiny particles of iron which arise in milling process. These particles of iron react with the phosphate binder to form hydrogen – it is consequence of the reaction between phosphoric acid and iron. The formed gas causes the formation of bubbles and the deformation of refractories. The goal of this thesis is to find suitable additives which can be used to stop or to limit the production of hydrogen. Usually used binders were replaced by a model binder to simplify the system and for better understanding. The model binder was prepared in laboratory by dissolving aluminium hydroxide in phosphoric acid. They used pure powdered pentacarbonyl iron instead of tiny iron particles from the milling process. The model binder was modified with using a few inhibitors. The calcimetr was used to measure their influence on the production of hydrogen, as well as measuring concentrated rows of selected inhibitors. These rows are necessary to optimize the inhibitors quantity added in the binder.
|
|
|
Analysis of ceramics from the Early and Late Bronze Age site in Praha - Chodovec
POKORNÁ, Kamila
The present work aims to partially assess the ceramic material recovered from the Early and Late Bronze Age site in Praha - Chodovec. Due to the large amount of ceramic material obtained from the entire site, the work deals only with the fragments of ceramic vessels recovered from objects 60, 69, 245 and 289. The analysis of ceramic fragments is based on a descriptive system designed by O. Chvojka. The main purpose of ceramic fragment analysis is to provide accurate dating of individual objects.
|
|
| |
guest ::
