|
|
Apartment building
Filípková, Zuzana ; Zumr, David (referee) ; Brukner, Bohuslav (advisor)
The subject of the bachelor thesis is the design of a residential building with almost zero energy consumption in the municipality of Blansko. The building will be situated on a plot of land in the northern part of the town between the existing development of family houses on the area defined by the zoning plan as a buildable area. The building has four floors above ground and one underground floor. It is covered with a flat vegetated roof. In the basement of the apartment building and there is a collective garage and technical facilities. On the above-ground floors there are residential units with the size of 1+kk to 4+kk. Parking of cars is possible in addition to the mass garage on the parking spaces in front of the building. The main entrance to the building is located on the east side. The common areas include a vestibule, entrance hall and corridors, from which there is access to the individual residential units. All floors are connected by a staircase and a hydraulic lift. The structural system of the building is combined. It consists of perimeter load-bearing walls and an internal skeleton longitudinal system composed of columns and transoms. The horizontal structure consists of a reinforced concrete slab. The building is based on a foundation slab. The perimeter walls are contact insulated with ETICS system using basalt wool of 200mm thickness.
|
|
|
Family house
Kukulová, Magdalena ; Vaněk, Vojtěch (referee) ; Berková, Petra (advisor)
The aim of the bachelor´s thesis is to design family house, which is located in Červený Kostelec in the quiet area. It is a two-storey building with attached garage, which has one-storey. Both the building and the garage have a flat extensive roof. The main entrances of the house and the garage are situated to south. On the first floor there is a social zone of the house, consisting of living room connected to kitchen, guest room, toilet, storage, garage and utility room. On the second floor is a private area, consisting of master bedroom, two children‘s rooms, walk-in wardrobe, bathroom and toilet. The building is based on reinforced concrete foundation strips. The load-bearing walls are masonry designed from ceramic blocks with insulation inside. Horizontal load-bearing structures are made from ceramics and concrete. The heating and ventilation systems are designed to ensure the proper operation of the building. The house will be heated by underfloor heating, using an air-to-water heat pump. Air exchange in the building will be provided by a forced ventilation, mediating both the supply and exhaust of fresh air into the living spaces. Rainwater will be collected in an accumulation tank and subsequently utilized for garden irrigation. Excess water will be infiltrated into the ground on the property. The project also includes an energy performance certificate developed within the framework of the Energetika program. The building falls into the "A - exceptionally energy-efficient" category.
|
|
|
Single-family house U kříže
Habrún, Dominik ; Sukop, Lukáš (referee) ; Ostrý, Milan (advisor)
The aim of the bachelor´s thesis is to design a single-family house located in Rozdrojovice. The thesis has two parts. The first part contains architectural and structural designs. The building has two-floor and attached one-floor garage. The building and the garage have a flat roof. The main entrance is oriented to North-West. A social zone of the house (living room connected to kitchen), study, bathroom, toilet, garage and utility room are situated on the first floor. A private zone comprising master bedroom, two bedrooms, dressing room, bathroom and toilet are situated on the second floor. The building is based on plain concrete foundation strips. The walls are masonry made of ceramic blocks. Horizontal load-bearing structures are made of in-situ reinforced concrete. The second part of the thesis contains the design of selected building services. Heating of the building and provision of hot water are ensured by air-water heat pump. Ventilation will be provided by an air handling unit with heat recovery. On the plot, there is a rainwater collection tank, which will be used for irrigation purposes. Part of the thesis is also the Energy Performance Certificate of the building. The single-family house falls into category A – exceptionally energy-efficient.
|
|
|
Energy-saving family house in Postřelmov
Komenda, Pavel ; Vendlová, Lucie (referee) ; Počinková, Marcela (advisor)
The aim of this bachelor’s thesis is the design of Energy efficient house in Postřelmov. This house is in new development area. The building has a rectangle shape with two floors. The building has a green flat roof and the ceilings are made of Spiroll. Car port is attached to the house on southern site and terrace is attached on east site. Both constructions are designed from timber. The main entrance is situated to north site. On the first floor is situated parent‘s bedroom with WC and bathroom. The kitchen is open to dining room and living room. Second floor is primary for children and their bedrooms with bathroom and home office. External, load bearing and partition walls on the first floor are consist of ceramic blocks 380 mm. External walls has also ETICS system consist of mineral wool 200 mm. Partitions on the second floor are made of Plasterboards. The building services include floor heating and mechanical ventilation services. Heating is facilitated by an air – water heat pump, primarily powered by solar energy harvested trought photovoltaic panels on the roof during daylight hours. The utility room also has battery storage for excess energy, which is used to power the rest of the house. Rainwater from all the roofs of the building is collected in a storage tank and the excess amount is drained into the ground using retention blocks. Additionally, the energy efficient house has integrated passive building elements that meet the requirements for classification in class A of the energy certificate.
|
|
|
Apartment building in Karviná
Waleczková, Veronika ; Sukop, Lukáš (referee) ; Sukopová, Dáša (advisor)
The focus of this bachelor's thesis is the elaboration of project documentation for the new construction of an apartment building with almost zero energy consumption. The apartment building is placed in Karviná in the Nové Město district. The building has four above-ground and one underground floor and includes 16 apartmans of various layouts. In terms of shape, the building is composed of blocks of different dimensions. The underground floor is designed for technical facilities, storage of things in cellar cubicles and a social room for the gathering of tenants. The above-ground floors are divided into apartment units with different layout variations and sizes, to accommodate a larger number of potential residents. Most of the apartment units have access to a balcony, which provides outdoor space and increases living comfort. The project includes material and structural solutions, ceramic blocks for vertical load-bearing structures and concrete for horizontal load-bearing structures. A green roof is design for the building to improve the building's properties. There is a parking lot on the southern part of the property.
|
|
|
Apartment building
Drahokoupilová, Nela ; Šoulová, Eva (referee) ; Vlček, Milan (advisor)
The content of the bachelor thesis involves is the design of project documentation for the new apartment building BD1 in the town of Kroměříž. The building has one underground and three above ground floors with a residential attic and a gabled roof. The underground floor includes garages, cellar storage units and technical facilities. The above ground floors contain four living cells. The apartment of the first floor is barrier-free. The house is founded on foundation strips. The construction systm of the building is a wall made of ceramic blocks POROTHERM. The horizontal load-bearing structures consist of POT beams and MIAKO insters.
|
|
|
Single-family house
Kroupová, Julie ; Bantová, Sylva (referee) ; Krupicová, Jana (advisor)
The purpose of the bachelor's thesis is the design of a single-family house for four people. The first part of the project is documentation for construction of the building, the second part is focused on utilities – heating, air conditioning. The building plot is chosen in a small village Radvanice near the town Přerov. The building has two above-ground floors. On the first floor is garage connected to the entrance, which is located to the northwest, utility room, toilet, pantry, and the kitchen open-up to the dining room and living room. On the second floor is private space. There are two children's bedrooms, storage room, study room, bathroom with toilet and master bedroom with private bathroom and walk-in-closet. The building is based on plain concrete foundations. Structural system is masonry. The loadbearing walls are design from Porotherm – ceramics blocks filled with mineral insulation. The house is designed with air to water heat pump, underfloor heating, and mechanical ventilation with heat recovery.
|
|
|
Air conditioning in a family house
Bařinka, Pavel ; Blasinski, Petr (referee) ; Rubina, Aleš (advisor)
The aim of my Bachelor's thesis was to design the nearly zero-energy house for a family of four. The thesis is divided into two parts. The first part is architectural and structure design and it contains also a concept of fire emergency and building's physics. The second part is focused on the building services, especially on the air conditioning. This part includes as well the energy performance certificate and a concept of wastewater and rainwater management, water supply, heating and electric installations. The detached house has two stories and a separated car port. The ground floor is a social space with an open-plan kitchen and a living room, which is open up to deck and garden. Across the corridor is a utility room, a toilet and a workshop. The first floor is a private space with bedrooms and a bathroom. The exterior walls are designed from ceramic blocks and they are insulated with mineral wool. The floor slab is designed from cast-in-place reinforced concrete. The main roof is monopitched with 7° slope, the other roofs are flat. The collected rainwater will be accumulated in a tank and used for watering the garden. The air-water heat pump is a main heat/cool source for a floor heating/cooling, which is designed in the house. As the secondary (bivalent) heat source are used electric heating rods. The domestic hot water will be mainly heated by the heat pump or with the electric spiral. The mechanical ventilation system has total air exchange of 300 m3/h. The MV unit contains an electric safety preheater, an enthalpic exchanger, two EC ventilators, filtres of filtration stages ISO Coarse and ISO ePM 1 and an automatic bypass. In the system was also designed additional water heater and cooler.
|
|
|
Energy-saving family house in Předměřice
Rybář, Aleš ; Vyhlídalová, Karolína (referee) ; Počinková, Marcela (advisor)
The bachelor´s thesis aims to design a nZEB detached house. It´s located in Předměřice in a relatively quiet area. The building has two floors with an attached garage, workshop, sanitary facilities and storage room. The building has a cold-pitched roof and the attached part has a mono-pitched roof. The ground floor of the house is a social part with a living room connected to the kitchen, study, bathroom, WC, garage, laundry and utility room. The first floor is a private zone with a master bedroom with a walk-in closet, two bedrooms, a bathroom, a WC and a storage room. The building is based on reinforced concrete foundation strips. The vertical structures are masonry made of ceramic blocks. Horizontal load-bearing structures are made of ceramic blocks and reinforced concrete. The house is connected to the freshwater main and sanitary sewer. Domestic hot water is supplied by the 300 l hot water cylinder. Rainwater from the roofs is accumulated for reuse. The excess water is diverted through the overflow into infiltration. Rainwater from built-up areas is infiltrated into the ground. Heating in the house is provided by an air-water heat pump, which is also used for DHW. The heating system of the house is floor heating in combination with electric radiators. On the cold roof there are placed photovoltaic panels for batteries placed in the utility room. The house is partly ventilated by a mechanical system with a heat recovery. The rest of the rooms that are not part of the living area are ventilated by windows.
|
|
|
Apartment building
Bobulová, Barbora ; Blažková, Vendula (referee) ; Daněk, Lukáš (advisor)
The bachelor's thesis deals with the design of an apartment building with nearly zero energy consumption. The aim is to create comprehensive project documentation for the construction. It must meet legislative requirements to facilitate the implementation of the design. The building is designed as a four-story structure with one underground floor, which houses an underground parking lot. It is topped with a single-layer flat roof above the top floor, which is distinctive in shape and features a green roof located on the ceiling structure of the underground floor. The apartment building contains 12 residential units intended for 33 people. The vertical load-bearing structures are made of ceramic blocks, while the horizontal load-bearing structures are made of reinforced concrete. The main entrance is oriented on the southwest side from the green roof, which is accessible by a staircase from the original, relatively flat plot. Additionally, there are six parking spaces next to the building designated for visitors of the residents.
|
guest ::
