|
|
Structure of apartment building – selected elements
Kanichová, Barbora ; Švaříčková, Ivana (referee) ; Perla, Jan (advisor)
The aim of the bachelor thesis is selected construction elements of low-rise apartment building. Reinforced concrete slab of the upper floor is solved in this thesis. The requirement to limit the propagation of impact noise from the staircase to the building and thermal bridge interruption was taken into account in the design of the construction. The deformation of the ceiling structure was verified regarding the integrity of the deposited infill structures. RFEM 5.18 software is used to solve internal forces. All the calculation are performer according to ČSN EN 1992-1-1 and ČSN 73 1201.
|
|
|
Concrete flat slab supported by columns
Macháček, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
The aim of this bachelor’s thesis is a structural design of a reinforced concrete point-supported slab for the second floor construction of a hospital. Software RFEM was used for modeling of internal forces, the results were verified by equivalent frame method and moment coefficient method. According to the RFEM results a tension reinforcement and slab shear reinforcement were designed. The deflection was manually calculated. Afterwards, a reinforcement drawing was made. The calculations correspond with ČSN EN 1992-1-1 a ČSN 73 1201.
|
|
| |
|
|
Preparation of the implementation of Kelčský Javorník Lookout Tower, Rajnochovice
Vokurek, Kamil ; Rotrekl, Ivo (referee) ; Kantová, Radka (advisor)
This diploma thesis is based on preparation of the implementation of Kelčský Javorník Lookout Tower in Rajnochovice. The main idea of the lookout tower constructing is to increase the local tourism. Diploma thesis assesses the whole project and it is focused on the foundation of the rough lower construction and also on assembly of the higher construction. Planning was assessed in terms of time, finance and in terms of the use of material resources. The quality of construction will be ensured by created inspection and test plans. To increase the overall service life of the structures, a scheduled maintenance schedule was designed. A variant solution of electricity supply was proposed, which will shorten the construction time, reduce the total construction costs and the overall maintenance of the building during its lifetime.
|
|
|
Concrete slab roof of underground parking garage
Řihošek, Jan ; Strnad, Jiří (referee) ; Perla, Jan (advisor)
Bachelor thesis deals with the roofing of the underground parking garage with reinforced point-supported slab. The aim of the work is to find out the internal forces on reinforced slab for two of the construction variants, design and check one construction variants. The replacement frame method and Finite Element Method were used for calculation internal forces using 2D model in the Dlubal RFEM 5.17. The work also includes the design and check of one column.
|
|
|
Dolní Kounice Gym
Jakubíková, Kateřina ; Erben, Adam (referee) ; Pavlovský, Tomáš (advisor) ; Petříček, Tomáš (advisor)
This bachelor’s thesis deals with a gym design in Dolní Kounice. It is developed into the level of building permit documentation and documentation for execution of the project. Its land is located in the north side of Dolní Kounice in the South Moravian Region near a primary school and a kindergarten. From the south side, the area is bordered by multi-storey buildings of the primary school and the kindergarten. From the west and the east sides, the area is edged with buildings of wine cellar or just with entrances into these cellars. In the north side there is an area of old brickyard. On the land of the gym there is a current outdoor playground of the primary school with an artificially created surface, a parking place and a fenced playground of the kindergarten. The space is intersected by an access road leading to the cellars in the west part. Along the edge of the east side there is a driveway leading to the local brickyard and it continues to the area of past sand quarry above the municipality. The gym is designed especially for the needs of the local primary school and the kindergarten, then for public. The gym will serve not only for teaching the physical education but also for sport and social usage of residents of the municipality. This work covers a scheme of solutions of ambient outdoor areas of the gym. The sport hall is a reinforced concrete cast-in-place two-floor building of a block shape mostly below the level of ground as a response to the valley type of countryside created by ambient buildings of wine cellars, the steep slope behind them and the high-rise building of the primary school which closes this area. The entrance into this area is located in the south part of the first subterranean floor which is not below the level of the adjacent terrain. The first subterranean floor is designed mainly for organizing educational, social activities and for the fans of the sportsmen. Also, there is a large entrance hall with a multifunctional reception.
|
|
|
Galéria Lučenec - selected parts of the construction technology plan
Jakobei, Michal ; Štěpán, Richard (referee) ; Motyčka, Vít (advisor)
The main purpose of this thesis is to describe in detail the processes of selected parts of the construction technology project for the construction of the department store Galéria Lučenec, based on the project documentation provided by the principal engineer. It is a large-scale new building with a cast-in-place reinforced concrete load-bearing structure with steel elements located in the center of Lučenec. The diploma thesis consists of the main parts such as the technical report of the construction technology project, a detailed coordination situation of the construction site, and a detailed time and financial plan of individual buildings. Within the main building, a study of the main technological stages of construction, elaboration of the project site equipment together with the associated design documentation and the technical report, design of the main construction machines and mechanisms, time schedule of the main building processes, and an item budget are described. Within the technological regulation and the control plan, the diploma thesis is focused on the cast-in-place structures of the superstructure. In the final part of the project, there are chapters devoted to topics such as occupational health and safety on the construction site, evaluation of LEED 2009 certification, the procedure for securing the construction pit, and the assessment of the main vertical lifting mechanisms.
|
|
|
Prestressed concrete slab of library
Slezák, Lukáš ; Perla, Jan (referee) ; Požár, Michal (advisor)
The diploma thesis deals with the design of the over-tensioned ceiling slab above the 1st floor of a two-story library building. It is a locally supported slab using prestressing. The analysis of internal forces is carried out by manual calculation using the method of sum moments and using the SCIA Engineer 22.0 calculation software, which uses the finite element method. The design is made according to the ČSN EN group of standards.
|
|
|
Construction project for implementation of Retirement home Žacléř
Bonaventura, Pavel ; Průcha, Aleš (referee) ; Kantová, Radka (advisor)
The aim of this diploma thesis is to prepare the construction of a Home for the Elderly in Žacléř. The work deals with technical regulations for the dismantling of asbestos roofing, demolition work and monolithic structures. For these regulations, a time plan for the implementation of monolithic structures, a control and test plan for monolithic structures, an itemized budget and a time and financial plan - object-oriented will be prepared. Furthermore, this work contains the coordination situation of the construction with broader transport relations, the design of the assembly machine, the report for the construction site equipment with drawings of the construction site equipment for individual technological regulations and last but not least the health and safety plan and assessment of construction noise. As part of the diploma thesis, several appendices were prepared for this stage, such as crane assessment, details of monolithic stair arms, noise wall scheme, budget for construction site equipment, environmental plan, ceiling and wall formwork scheme and staff balance for selected stages.
|
|
|
Residential Building
Šnobltová, Simona ; Perla, Jan (referee) ; Švaříčková, Ivana (advisor)
The diploma thesis deals with the design of the load-bearing reinforced concrete structure of a new apartment building, which has four above-ground and one underground floor. First, the entire object was modeled in the Scia Engineer program, and then certain elements of the structure were selected, which were designed and assessed in more detail. A detailed analysis was carried out for two ceiling slabs (a slab above the underground floor and a slab of a typical floor), a pillar of the underground floor, a reinforced concrete staircase going from the first underground to the first above ground floor and a reinforced concrete basement wall.
|
guest ::
