|
|
Heating in lossy waveguide
Tichý, Jakub ; Horák, Jiří (referee) ; Raida, Zbyněk (advisor)
This thesis deals with modeling of a waveguide with the rectangular cross-section in Comsol Multiphysics and optimization with PSO algorithm in MATLAB. The practical section describes electromagnetic wave excitation at different frequencies; and the influence of changes of basic characteristics, proportions and the location of an inserted dielectric slide on passing electromagnetic wave in a single-mode band. In next phase of the project, changes of basic characteristics on heating structure at electromagnetic field excitation by this waveguides are discussed. The last part deals with optimizing waveguide filter with particle swarm optimization and research his new electric and thermal character. Modeled phenomena are illustrated by pictures of a waveguide from the axial upper projection, and on rectangular charts.
|
|
|
Magnetic drive
Aubrecht, Ondřej ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
In the bachelor thesis, selected types of magnetic motors are analyzed and mutually compared. For each motor, a short description is given and critical evaluation of its properties is provided. In the next part of the project, all the magnetic motors are mutually compared and a suitable type of the motor for the computer simulation is chosen. The simulations are performed in programs COMSOL Multiphysics and program Femm. In the last part of the project, simulations are checked on the real prototype of magnetic motor.
|
|
|
Time domain edge finite elements
Cigánek, Jan ; Motl, Milan (referee) ; Raida, Zbyněk (advisor)
Diplomová práce se zabývá metodou hybridních (hranových a uzlových) konečných prvků ve frekvenční i časové oblasti. Tato metoda je použita pro analýzu vlnovodu parallel-plate, v kterém jsou umístěny dvě dielektrické vrstvy. Jako ukončení vlnovodu je implementována dokonale přizpůsobená vrstva označována PML. Projekt řeší možný výběr PML vrstvy v časové oblasti. Metoda je programována v programu MATLAB a výsledky jsou porovnány s programem COMSOL Multiphysics.
|
|
|
Flow sensor
Symerský, Tomáš ; Psota, Boleslav (referee) ; Kosina, Petr (advisor)
This diploma thesis is divided into two parts - theoretical and practical. In its first, theoretical part, deals with the theory of fluid and gas flow, heat transfer and diversification of sensors for flow measurement working on the electrical principle. It also deals with thermodynamic principle, which can be used for measuring very small flow and low-temperature ceramics that is used to implement microcanals for sensing very low flows. The practical part of the thesis deals with the very simulation of the entire structure in the program “COMSOL Multiphysics” - both in 2D and 3D views. Then there is shown the implementation and measurement of the flow sensor in a low-temperature ceramics, working on a thermodynamic principle.
|
|
| |
|
|
Electromagnetic field mapping in biological tissues
Bereznanin, Martin ; Dlouhý, Jiří (referee) ; Rozman, Jiří (advisor)
The main objective of this study is to learn about the theory of electromagnetic field and to create a model of propagation of ultra short waves in a biological tissue. Next point of this paper is to determine a specific absorption rate (SAR) using a valid sanitary standard. A particular model solution was realized in a model environment of the program Comsol Multiphysics 3.5. A human head and a cellular phone with an intern antenna were successfully created in this model environment. First of all were entered appropriate parameters which led to a successful representation of the distribution of electric field intensity. A value of specific absorption rate taken by a biological tissue was determined in the next step. This value was compared to the value listed in a valid sanitary standard to prevent its overrun. A development of a temperature in a biological tissue was determined as well, according to a six minutes long interval stated in a valid sanitary standard.
|
|
|
Magnetic drive
Aubrecht, Ondřej ; Pokorný, Michal (referee) ; Raida, Zbyněk (advisor)
In the bachelor thesis, selected types of magnetic motors are analyzed and mutually compared. For each motor, a short description is given and critical evaluation of its properties is provided. In the next part of the project, all the magnetic motors are mutually compared and a suitable type of the motor for the computer simulation is chosen. The simulations are performed in programs COMSOL Multiphysics and program Femm. In the last part of the project, simulations are checked on the real prototype of magnetic motor.
|
|
|
Flow sensor
Symerský, Tomáš ; Psota, Boleslav (referee) ; Kosina, Petr (advisor)
This diploma thesis is divided into two parts - theoretical and practical. In its first, theoretical part, deals with the theory of fluid and gas flow, heat transfer and diversification of sensors for flow measurement working on the electrical principle. It also deals with thermodynamic principle, which can be used for measuring very small flow and low-temperature ceramics that is used to implement microcanals for sensing very low flows. The practical part of the thesis deals with the very simulation of the entire structure in the program “COMSOL Multiphysics” - both in 2D and 3D views. Then there is shown the implementation and measurement of the flow sensor in a low-temperature ceramics, working on a thermodynamic principle.
|
|
|
Electromagnetic field mapping in biological tissues
Bereznanin, Martin ; Dlouhý, Jiří (referee) ; Rozman, Jiří (advisor)
The main objective of this study is to learn about the theory of electromagnetic field and to create a model of propagation of ultra short waves in a biological tissue. Next point of this paper is to determine a specific absorption rate (SAR) using a valid sanitary standard. A particular model solution was realized in a model environment of the program Comsol Multiphysics 3.5. A human head and a cellular phone with an intern antenna were successfully created in this model environment. First of all were entered appropriate parameters which led to a successful representation of the distribution of electric field intensity. A value of specific absorption rate taken by a biological tissue was determined in the next step. This value was compared to the value listed in a valid sanitary standard to prevent its overrun. A development of a temperature in a biological tissue was determined as well, according to a six minutes long interval stated in a valid sanitary standard.
|
|
|
Time domain edge finite elements
Cigánek, Jan ; Motl, Milan (referee) ; Raida, Zbyněk (advisor)
Diplomová práce se zabývá metodou hybridních (hranových a uzlových) konečných prvků ve frekvenční i časové oblasti. Tato metoda je použita pro analýzu vlnovodu parallel-plate, v kterém jsou umístěny dvě dielektrické vrstvy. Jako ukončení vlnovodu je implementována dokonale přizpůsobená vrstva označována PML. Projekt řeší možný výběr PML vrstvy v časové oblasti. Metoda je programována v programu MATLAB a výsledky jsou porovnány s programem COMSOL Multiphysics.
|
guest ::
