|
|
Active frequency filter using current mode
Paščinský, Jiří ; Dostál, Tomáš (referee) ; Slezák, Josef (advisor)
The aim of this work is design of frequency filter working in current mode. The introduction of the work deals with features and applications of frequency filters. Special attention is paid to the transfer function of the filter. In third chapter different operational modes of electrical circuits and their advantages and disadvantages are discussed. Attention is paid to active blocks suitable for circuits working in current mode. There is description of components AD844 and EL2082 which represent current conveyors of the second generation and are used in the designed filter. The last two chapters deal with design of component values of the frequency filter. The designed circuit was simulated in PSpice and the results were compared with measurments. Also sensitivity and tolerance analysis of the filter were performed.
|
|
|
Antialiasing frequency filter
Kocián, Daniel ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
The bachelor´s work deals with a project of the connecting of the antialiasing electronically turnable ARC filter of the low pass of the fifth order with the Butterworth approximation with the adjustable limited frequency FM in the extent 10 kHz – 100 kHz. The theoretical part includes a short summary and a description of constituent blocks of the complete device. Then the problems of the frequency filters are analyzed there. The practical part consists the project of the printed circuilts of all constituent blocks, then the calculation of all circuited components of ARC filter of the type of low pass for all limit frequencies of the filter. The result of the all work is a device which consists of five blocks and its core is the microcotroler ATmega16. For the electronic turnabling of the filter there are used digital potenciometers. The inseparable part is the enclosed CD-ROM which includes all made materials.
|
|
|
Adaptive frequency filter
Kříž, Petr ; Hájek, Karel (referee) ; Sedláček, Jiří (advisor)
The aim of this work is to design a filter of the type low–pass of order 5th with Butterworth’s approximation in the range of over-tuning 10 – 100 kHz and if it will be possible so! achieve even higher marginal frequencies. To compare two typical representatives of the frequency filters cascading and non-cascading synthesis from the viewpoint the accuracy of an! approximation function, sensitivity to the tolerance values of components, number of the components (mainly OZ) and viability, especially the possibility of electronic over-tuning in selected frequency range. On the basis of these conditions will be chosen one design, which will be realized later. Further it will be necessary to consider the possibilities of electronic over-tuning and to choose for this over-tuning suitable component, to design user management changes of marginal frequency fm by the help of keyboard + LCD and control application on the PC. For this hardware will be programmed appropriate control software. At the end of this work will be constructed appropriate device, which fullfils requirements written above and will be subjected to the laboratory measurements that verify function of this device. The constructional details of the filter are presented in the enclosure at the end of this work. At the CD are available all materials, which were created during the master’s thesis or which are necessarily concerned.
|
|
|
Active frequency filter using current mode
Paščinský, Jiří ; Dostál, Tomáš (referee) ; Slezák, Josef (advisor)
The aim of this work is design of frequency filter working in current mode. The introduction of the work deals with features and applications of frequency filters. Special attention is paid to the transfer function of the filter. In third chapter different operational modes of electrical circuits and their advantages and disadvantages are discussed. Attention is paid to active blocks suitable for circuits working in current mode. There is description of components AD844 and EL2082 which represent current conveyors of the second generation and are used in the designed filter. The last two chapters deal with design of component values of the frequency filter. The designed circuit was simulated in PSpice and the results were compared with measurments. Also sensitivity and tolerance analysis of the filter were performed.
|
|
|
Adaptive frequency filter
Kříž, Petr ; Hájek, Karel (referee) ; Sedláček, Jiří (advisor)
The aim of this work is to design a filter of the type low–pass of order 5th with Butterworth’s approximation in the range of over-tuning 10 – 100 kHz and if it will be possible so! achieve even higher marginal frequencies. To compare two typical representatives of the frequency filters cascading and non-cascading synthesis from the viewpoint the accuracy of an! approximation function, sensitivity to the tolerance values of components, number of the components (mainly OZ) and viability, especially the possibility of electronic over-tuning in selected frequency range. On the basis of these conditions will be chosen one design, which will be realized later. Further it will be necessary to consider the possibilities of electronic over-tuning and to choose for this over-tuning suitable component, to design user management changes of marginal frequency fm by the help of keyboard + LCD and control application on the PC. For this hardware will be programmed appropriate control software. At the end of this work will be constructed appropriate device, which fullfils requirements written above and will be subjected to the laboratory measurements that verify function of this device. The constructional details of the filter are presented in the enclosure at the end of this work. At the CD are available all materials, which were created during the master’s thesis or which are necessarily concerned.
|
|
|
Antialiasing frequency filter
Kocián, Daniel ; Murina, Milan (referee) ; Sedláček, Jiří (advisor)
The bachelor´s work deals with a project of the connecting of the antialiasing electronically turnable ARC filter of the low pass of the fifth order with the Butterworth approximation with the adjustable limited frequency FM in the extent 10 kHz – 100 kHz. The theoretical part includes a short summary and a description of constituent blocks of the complete device. Then the problems of the frequency filters are analyzed there. The practical part consists the project of the printed circuilts of all constituent blocks, then the calculation of all circuited components of ARC filter of the type of low pass for all limit frequencies of the filter. The result of the all work is a device which consists of five blocks and its core is the microcotroler ATmega16. For the electronic turnabling of the filter there are used digital potenciometers. The inseparable part is the enclosed CD-ROM which includes all made materials.
|
guest ::
