|
|
Wireless charger based on the NFC Forum WLC 2.0 standard
Rada, Vojtěch ; Junasová, Veronika (referee) ; Šteffan, Pavel (advisor)
This diploma thesis is focused on wireless charging technology according to the Wireless Charing 2.0 standard by the NFC Forum and the design of an ASIC circuit of a device functioning as a listener, where the primary emphasis is placed on the digital design of this circuit. In the beginning the work deals with a general theory, gradually discussing all the standards from the NFC Forum that are necessary for the control protocol design according to the Wireless Charging 2.0. Subsequently, the analysis of a real communication in the development kit for this standard is conducted, based on which the system design of the digital circuit is made. The designed circuit is described by VHDL language and verified by running the basic simulations to check the functionality of the designed parts of the circuit. In the final part of the thesis, a prototype module with the proposed system is fabricated, implemented in an FPGA with a connected battery charger circuit and its functionality is tested in practice.
|
|
|
Development of laboratory samples for wireless transmission of electric power based on the magnetic induction
Kopečný, David ; Štěpánek, Jaroslav (referee) ; Krbal, Michal (advisor)
The aim of the thesis is to collect the information about wireless transmission by using magnetic induction and about the current solutions of wireless applications in practice. The thesis includes theoretical basis and information about the current state of wireless power applications. This thesis is also focused on physical principle and draft of possible technical solution. On top of that, it also contains the information from some legislative and hygienic regulations. The second aim is draft of laboratory equipment on the base of gained information and its implementation for purpose of teaching and measuring. For this part was chosen topology of circuit and the specifications of resonance circuits. It resulted in producing a preparation, which consists of the exciter, primary circuit, secondary circuit and a module for measuring. The third aim is to take a measurement on this product and evaluation of characteristic from point of view of efficiency. Measured data were integrated into characteristics. The efficiency of transfer was measured depending on distance and used load. At the same time was also observed work frequency of product. Furthemore, another laboratory product was measured, in which was reached the efficiency more than 51%. The thesis is divided into four main chapters, which can be thematically named as follows: the information, the theory, the draft and the measurement. The first two chapters deal with the theory and characterization of technologies of already applied systems mainly from transport. The following two chapters contain the description of proposal of the product and the very measuring of the efficiency.
|
|
|
Active protection and monitoring device for wireless chargers
Volek, Radim ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This thesis deals with the design of monitoring device, which should serve for measurement and recording measured values of wireless charging device. The thesis further solves design of device protection method. Measuring instrument is equipped with several temperature sensors, which measures temperature in selected points of charging device and is also equipped with current sensor, which measures current from power source of charging device. Sensors are connected to development board FRDM-KL27Z with microcontroller MKL27Z64VLH4. Part of this work is also software which serves to evaluation of data obtained by the sensors.
|
|
|
Wireless charging station
Pokorný, Josef ; Hrabina,, Jan (referee) ; Janoušek, Jiří (advisor)
The paper deals with possibilities of wireless charging and transmission of electric energy using inductive coils. Basic models of air coils are described using CST simulation software. The product consists of a transducer for transmitting coil, two coils with ferromagnetic shield, synchronous rectifier and battery charging circuit. Communication is provided by an 8-bit microcontroller with wireless modules and an ethernet shield for online monitoring. The aim of the thesis is to design a wireless charging station with a power transfer of 40 W with the possibility of online monitoring of the charging state.
|
|
|
Design and implementation of wireless charging for embedded systems
Bednařík, Josef ; Bastl, Michal (referee) ; Krejsa, Jiří (advisor)
This thesis deals with the design and realization of wireless power charging circuit for embedded systems. The research section focuses on the various ways and technologies used in applications of wireless power transfer. The theoretical part also briefly characterizes resonant inductive coupling and critical parameters of the transfer. This is followed by realization of various variants of transfer coils and electromagnetic oscillators. Wireless power charging prototype system is created and used for testing purposes to find optimal configuration of resonator. The hardware unit presented in the final part of the thesis exploits microcontroller and implemented software is extended by foreign object detection algorithm along with method to monitor battery charging state.
|
|
|
Smart Wearable
Moravec, Luboš ; Macháň, Ladislav (referee) ; Šteffan, Pavel (advisor)
This master’s thesis deals with the explanation of the concept of smart wearables and the different application possibilities. This work also includes examples of finished demonstration devices in this category. Part of this work is devoted to guide the selection of appropriate components for the design of new equipment in the category of smart wearable. The result of this thesis is designed wearable and charging station. This device is able to read user input and display that information on a smart device running under Android system connected via Bluetooth technology.
|
|
|
Design and implementation of wireless charging for embedded systems
Bednařík, Josef ; Bastl, Michal (referee) ; Krejsa, Jiří (advisor)
This thesis deals with the design and realization of wireless power charging circuit for embedded systems. The research section focuses on the various ways and technologies used in applications of wireless power transfer. The theoretical part also briefly characterizes resonant inductive coupling and critical parameters of the transfer. This is followed by realization of various variants of transfer coils and electromagnetic oscillators. Wireless power charging prototype system is created and used for testing purposes to find optimal configuration of resonator. The hardware unit presented in the final part of the thesis exploits microcontroller and implemented software is extended by foreign object detection algorithm along with method to monitor battery charging state.
|
|
|
Active protection and monitoring device for wireless chargers
Volek, Radim ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This thesis deals with the design of monitoring device, which should serve for measurement and recording measured values of wireless charging device. The thesis further solves design of device protection method. Measuring instrument is equipped with several temperature sensors, which measures temperature in selected points of charging device and is also equipped with current sensor, which measures current from power source of charging device. Sensors are connected to development board FRDM-KL27Z with microcontroller MKL27Z64VLH4. Part of this work is also software which serves to evaluation of data obtained by the sensors.
|
|
|
Wireless charging station
Pokorný, Josef ; Hrabina,, Jan (referee) ; Janoušek, Jiří (advisor)
The paper deals with possibilities of wireless charging and transmission of electric energy using inductive coils. Basic models of air coils are described using CST simulation software. The product consists of a transducer for transmitting coil, two coils with ferromagnetic shield, synchronous rectifier and battery charging circuit. Communication is provided by an 8-bit microcontroller with wireless modules and an ethernet shield for online monitoring. The aim of the thesis is to design a wireless charging station with a power transfer of 40 W with the possibility of online monitoring of the charging state.
|
|
|
Development of laboratory samples for wireless transmission of electric power based on the magnetic induction
Kopečný, David ; Štěpánek, Jaroslav (referee) ; Krbal, Michal (advisor)
The aim of the thesis is to collect the information about wireless transmission by using magnetic induction and about the current solutions of wireless applications in practice. The thesis includes theoretical basis and information about the current state of wireless power applications. This thesis is also focused on physical principle and draft of possible technical solution. On top of that, it also contains the information from some legislative and hygienic regulations. The second aim is draft of laboratory equipment on the base of gained information and its implementation for purpose of teaching and measuring. For this part was chosen topology of circuit and the specifications of resonance circuits. It resulted in producing a preparation, which consists of the exciter, primary circuit, secondary circuit and a module for measuring. The third aim is to take a measurement on this product and evaluation of characteristic from point of view of efficiency. Measured data were integrated into characteristics. The efficiency of transfer was measured depending on distance and used load. At the same time was also observed work frequency of product. Furthemore, another laboratory product was measured, in which was reached the efficiency more than 51%. The thesis is divided into four main chapters, which can be thematically named as follows: the information, the theory, the draft and the measurement. The first two chapters deal with the theory and characterization of technologies of already applied systems mainly from transport. The following two chapters contain the description of proposal of the product and the very measuring of the efficiency.
|
guest ::
