|
|
Wireless Sensory Network Using LoRa Technology
Mikulášek, Michal ; Pokorný, Jiří (referee) ; Škorpil, Vladislav (advisor)
The bachelor thesis focuses in the first half on the Internet of Things and the available wireless technologies for the Internet of Things. Each technology is characterized by its features, pros and cons, as well as the possibilities of using it in the Internet of Things. In the second half of the thesis, a practical design and construction of a LoRa network, consisting of a sensory and a central unit, is carried out. The parts of the solution are designed wiring schemes, printed circuit boards and detailed photo documentation. Additionaly the software solutions for both types of units are described, with detailed descriptions of the proposed features. The maximum possible range is tested and documented for the entire solution. Subsequently, a detailed measurement of the power consumption of the sensor unit is carried out and an extensive estimation of its battery life for a selected battery.
|
|
| |
|
|
NiCd, NiMH and Li-ion accumulator charger supplied and controlled via USB
Nosek, Petr ; Mišurec, Jiří (referee) ; Zeman, Václav (advisor)
Deals with analysis and battery charging NiCd, NiMH, Li-Ion through a series of microcontroller from Atmel AVR controlled and powered from a PC via USB. Part is devoted to the characteristics of the USB interface and software capabilities to the enumeration AVR microcontroller. It also contains the basic characteristics of charged batteries, including the known methods of charging. The second half of the tehesis then provides a complete design and implementation of battery chargers, which consists of electronic parts, ATMEGA168 microcontroller program and the program for the PC. Presents circuit diagram of the charger and flowcharts of the main features of the program. The result of this thesis is functional battery charger above types. Attachments include a proposal DPS, a full circuit diagram and the charge and discharge characteristics of cells. The thesis is also referred to annex to the optical disk. Here it is mainly programs for microcontroller and PC. They are listed here as well as individual projects for AVR Studio, Borland Builder C + + and Eagle, which was created by chargers.
|
|
|
Design and implementation of MIDI driver
Jirčík, Zdeněk ; Slanina, Martin (referee) ; Schimmel, Jiří (advisor)
This bachelor thesis describes design and implementation of a MIDI controller that will transmit messages to MIDI program change and MIDI continuous messages that the value of the MIDI controller standard type. The theoretical part describes communication using the MIDI protocol, its implementation in microprocessor and controls the LCD controller. The practical part deals with the design and implementation of the MIDI controller. The result of this work is a circuit diagram, PCB, microprocessor control program and construction of MIDI controller.
|
|
|
Universal measuring device for USB interface
Nosek, Petr ; Šilhavý, Pavel (referee) ; Krajsa, Ondřej (advisor)
This bachelor’s thesis deals with design and subsequent implementation of Universal measuring boards, cooperating with the PC via USB, representing the office of the oscilloscope and logic analyzer. It contains a proposal for a hardware measuring boards and the proposal of operating software for microcontroller mounted on the measuring board, as well as for personal computer operating system MS Windows. The work is complete chart measuring the preparation, design printed circuit and the final product photos. We are also diagrams of all development programmes and their source codes.
|
|
|
Over the Air Firmware Upgrade for Wireless Sensor Networks
Minár, Tomáš ; Červenka, Vladimír (referee) ; Mráz, Ľubomír (advisor)
This diploma thesis is dedicated to one of the problems in wireless sensor networks – over the air upgrade (OTAU) of nodes. The requirements for upgrade and possible ways how to transfer new firmware image to nodes are stated in the first chapter. The second chapter is focused on solving the problem of firmware dissemination to whole network based on analysis of known protocols. The practical part of this thesis deals with OTAU design and implementation in Lightweight Mesh software stack from Atmel. Proposed system was tested on deRFnode platform with plugged in deRFmega128 module. The upgrade process of designed system is evaluated on test network in last part. Practical test results are compared with OTAU solution for BitCloud.
|
|
|
Mikroprocesor control for laboratory power source
Hauer, Petr ; Kubásek, Radek (referee) ; Szabó, Zoltán (advisor)
This bachelor thesis aims to design and implementation a laboratory power supply controlled by microprocessor and PC via USB. The theoretical part describes the USB bus and the manner of its implementation to the microprocessor. There are the basic types of switching and linear sources and methods of control by a microprocessor. The practical part deals with the design and implementation of the resource. The results of this work are the themes of control and power part of power supply, printed circuit boards, software for the PC and microprocessor and measurements on the completed source.
|
|
|
Wireless station with connection to IoT network
Kubíček, Richard ; Povalač, Aleš (referee) ; Kolouch, Jaromír (advisor)
This thesis describes the design of WiFi station for connection sensors and drivers with Inetrnet of Things connection. The station uses WiFi module ESP8266. Description of component which the station consists is also part of the thesis. Description of created library for control module ESP8266 by microcontroller is also part of thesis. Finally, documents for production of this station are also part of the thesis.
|
|
|
Wireless sensor based on LoRa technology
Pospíšil, Jan ; Krajsa, Ondřej (referee) ; Troják, David (advisor)
The bachelor thesis in theoretical part is focused on wireless technologies used for home control and automation devices where low power consumption is required. There are mentioned possibilities of each technology, energy requirements, range and throughput. The result of practical part is design and construction of a wireless temperature sensor which uses LoRa technology to communicate with a gateway and is also capable to last on battery for years. Additional feature is user possibility to use GPIO pins in form of relays. The task also covers design and construction of a gateway which listens for LoRa packets and communicates with PHP application on server side. Last step of practical part is focused on design of PHP application, which is responsible for visualization of received data.
|
|
|
IPv6 for Wireless Sensor Networks
Polak, Martin ; Komosný, Dan (referee) ; Červenka, Vladimír (advisor)
This thesis deals with the issues 6LoWPAN protokolu and implementation of IPv6 on the specied platform. Introduction thesis deals with the explanation of wireless sensor networks. Next it was descibed 6LoWPAN protocol, which maps IPv6 on standard IEEE 802.15.4. The thesis further concentrates to exploration of possible operation systems, that are designed for sensor networks and then followed by comparison of their characteristics and advantages. The fth chapter is focused on he implementation of the operating system to the sensor node Iris, introduction Iris and with the structure of the operating system Contiki OS. At the end of thesis is description of the implementation of this system in the sensor node Iris.
|
guest ::
