|
|
Extension educational module to a microcontroller ATmega
Novák, Petr ; Karakhalil, Mourad (referee) ; Zuth, Daniel (advisor)
This bachelor thesis is concerning with design, realization and proposing samples of exemplars for chosen peripherals. The thesis will serve as additional education module for motherboard with microcontroller ATmega 128, it will be used in subject called Microprocessor technology. It will be dealing there with description of design, which was made in integrated development environment called EAGLE 5.4.0. Realization and verification of functionality were done with created programs in integrated development environment Atmel AVR studio 6.1.
|
|
|
Signal generator controlled by AVR
Wiesner, Jiří ; Steinbauer, Miloslav (referee) ; Roubal, Zdeněk (advisor)
The aim of this thesis was to design a universal function generator, which would find use for magnetizing and demagnetizing job, or for measuring hysteresis. The heart of the control module is an 8-bit microcontroller from Atmel, they are connected to the input/output peripherals, not least optocouplers for relay. Microcontroller communicates with the other module mounted DA converters using the SPI lines. At the exit so they can rise to any signals programmed into the MCU.
|
|
|
Matrix display
Gábik, Matej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The aim of this thesis is to implement autonomous information portal using matrix display BUSE BS210. The first part deals with the theoretical problem-solving and management options display. The second part is dedicated to the development of necessary hardware and the last part is the software described herein microcontroller and microcomputer Raspberry Pi.
|
|
|
Small-lot Production Line modernize
Havlena, Marek ; Vdoleček, František (referee) ; Zuth, Daniel (advisor)
This Master‘s thesis is dedicated to the design and modernization of the control of production line for the small-lot production of various plastic products. As a control unit will be used 8-bit microcontroller ATmega128. This thesis also deals with design of the needful electronics to control the production line by using appropriate elements and necessary software solution.
|
|
|
Access Control System using BodyCom Technology
Křístel, Jan ; Zamazal, Michal (referee) ; Povalač, Aleš (advisor)
This master's thesis is primarily focused on the design of an electronic access control system using the BodyCom technology. The first section describes the working principle of this technology and its influence on human body. The second section shows an application of this technology in construction options of the electronic access control system.
|
|
|
Small-lot Production Line modernize
Havlena, Marek ; Vdoleček, František (referee) ; Zuth, Daniel (advisor)
This Master‘s thesis is dedicated to the design and modernization of the control of production line for the small-lot production of various plastic products. As a control unit will be used 8-bit microcontroller ATmega128. This thesis also deals with design of the needful electronics to control the production line by using appropriate elements and necessary software solution.
|
|
|
Rotation speed sensor
Dudáš, Juraj ; Knobloch, Jan (referee) ; Prudík, Martin (advisor)
This bachelor thesis is aimed on rotation and position sensing of rotating devices topic. The thesis is devided into theoretical and practical part. The first theoretical part deals with rotation and position sensing, sensing possibilities and types of rotation and position sensors. The next thing in this part is about market possibilities and research in sphere of these sensors. In the practical part of the thesis is realized the rotation and position sensor. In the introduction of this part are defined the main parts, which are going to be used in this device. Afterward are these parts used in the scheme of wiring diagram and printed circuit board. Next in the thesis is described the manufacturing of the device it’s programming and functioning. The practical part ends with the test of the device. In the conclusion are the process of the thesis and reached results evaluated
|
|
|
Signal generator controlled by AVR
Wiesner, Jiří ; Steinbauer, Miloslav (referee) ; Roubal, Zdeněk (advisor)
The aim of this thesis was to design a universal function generator, which would find use for magnetizing and demagnetizing job, or for measuring hysteresis. The heart of the control module is an 8-bit microcontroller from Atmel, they are connected to the input/output peripherals, not least optocouplers for relay. Microcontroller communicates with the other module mounted DA converters using the SPI lines. At the exit so they can rise to any signals programmed into the MCU.
|
|
|
Color sensor for feedback control of press
Procházka, Michal ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This thesis builds on the semestral thesis, which deals with color processing theory and research available hardware for solution. The introduction discusses the basic theories on color models, which is an outline of how the award for the color models can be programmed. The second part is focused on different hardware components and control elements, RGB sensor, TWI communication, imaging units and USART. These components are always describes the basic software functions. At the end of the thesis describes the measurement as a whole. At the very end of the work is to think of it as a given topic more appropriately extended.
|
|
|
Matrix display
Gábik, Matej ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The aim of this thesis is to implement autonomous information portal using matrix display BUSE BS210. The first part deals with the theoretical problem-solving and management options display. The second part is dedicated to the development of necessary hardware and the last part is the software described herein microcontroller and microcomputer Raspberry Pi.
|
guest ::
