|
|
Single-family house
Kroupová, Julie ; Bantová, Sylva (referee) ; Krupicová, Jana (advisor)
The purpose of the bachelor's thesis is the design of a single-family house for four people. The first part of the project is documentation for construction of the building, the second part is focused on utilities – heating, air conditioning. The building plot is chosen in a small village Radvanice near the town Přerov. The building has two above-ground floors. On the first floor is garage connected to the entrance, which is located to the northwest, utility room, toilet, pantry, and the kitchen open-up to the dining room and living room. On the second floor is private space. There are two children's bedrooms, storage room, study room, bathroom with toilet and master bedroom with private bathroom and walk-in-closet. The building is based on plain concrete foundations. Structural system is masonry. The loadbearing walls are design from Porotherm – ceramics blocks filled with mineral insulation. The house is designed with air to water heat pump, underfloor heating, and mechanical ventilation with heat recovery.
|
|
|
Apartment build in Valašském Meziříčí
Honešová, Veronika ; Pěnčík, Jan (referee) ; Dohnal, Jakub (advisor)
The bachelor's thesis focuses on the design of a new apartment building with a basement, for which project documentation for construction implementation is being prepared. The proposed apartment building is located in Valašské Meziříčí and is designed as a standalone structure with a basement, three above-ground floors, and an underground garage. The apartment building is designed for families of three to four members and consists of four residential units. The entrance to the building is situated on the northern side. On the ground floor, there is an entrance common hallway with a staircase. From the hallway, two apartments of 3+kk can be accessed. On the first floor, there is a 3+kk apartment and a 4+kk maisonette apartment. On the second floor, there is a part of the maisonette apartment. In the basement, there are garages. Each residential unit has a terrace or balcony and one parking space. The building is insulated with the ETICS contact system and is designed from POROTHERM ceramic masonry elements, with horizontal structures being reinforced concrete monoliths, and the entire building is founded on strip foundations. The apartment building is designed with a flat roof. The facade will be finished with a white thin-layer silicone plaster or facade panels with a wood imitation.
|
|
|
Extension of the building on Husova Street in Slavkov u Brna
Mitura, Daniel ; Rabl, Tomáš (referee) ; Hradil, Dušan (advisor)
The subject of this bachelor's thesis is the assessment of the existing building of a family house and the design of a complete reconstruction, abovestructure and extention and its change to a multifunctional building. The solved building is located in a terraced house on Husova Street in the center of Slavkov u Brna. The building is divided into 3 functional parts, namely the rebuilt and upgraded part of the building, the demolished part of the existing extension and the newly designed part of the extension. The entrance to the building is secured by an underpass to an enclosed courtyard with additional parking spaces. The new condition has two floors, a residential attic and a partial basement. There is a hairdressing salon on the first floor of the converted part of the building. In other parts of the upper floors there are four residential units. In the basement there are warehouses, cellars, hygiene, utility room and relaxation room with sauna and shower. In the rebuilt part, the original load-bearing system made of mixed masonry and wooden beam ceilings was preserved. In the built-up part, a reinforced concrete monolithic ceiling and ceramic fittings are proposed. The supporting system of roofing with a mansard roof is made of a wooden truss and steel central beam. Concrete blocks in the basement and ceramic fittings for the above-ground floor are connected for the load-bearing structures of the extension. The rigidity of the structure is ensured by reinforced concrete monolithic wreaths, ceilings. The roofing of the ports is solved by a single-skin roof over the stairs and a double-skin countertop roof over the housing units. Thermal insulation of peripheral structures is the subject of the ETICS contact thermal insulation system. The facade on the south side facing Husova Street will be renovated to its original condition.
|
|
|
House in Kašnice
Dostál, Petr ; Pilinszki, Martin (referee) ; Müller, Jan (advisor)
The content of this bachelot thesis is the design of a new family house in village Kašnice. The new building has 1 above-ground floor and a partial basement. The construction is based on strip foundation. The vertical supporting structures in the patrial basement are designed from concrete formwork and the rest of vertical supporting are designed from ceramic masonry. The floor is made of cast-in-place reinforced concrete slabs. The roof of the building is warm flat with vegetation layer.
|
|
|
Apartment building
Mrázková, Eva ; Vlach, František (referee) ; Struhala, Karel (advisor)
The subject of the thesis is the processing of project documentation for the construction of a residential building in Pasohlávky u Brna. It is a detached building with two above-ground floors. There are 8 residential units in the building, 4 housing units on each floor. The building does not have a cellar, the structure is based on strip foundations from plain concrete in combination with pre-cast permanent formwork from concrete block and foundation slab. The structural system is designed as a masonry system from clay masonry. The external walls are covered with contact thermal insulation ETICS and internal loadbearing walls are design as an acoustic wall. The ceiling structure is made from a cast-in-place reinforced concrete floor. The building is covered with a single-layer flat roof. The project documentation also includes design of terrace, footpath and parking spaces.
|
|
|
Block of flats with commercial space
Honka, Matěj ; Lindovský, František (referee) ; Müller, Jan (advisor)
The topic of this bachelor thesis is elaboration of a comprehensive project documentation for a construction of an apartment building with a commercial area. The building consists of a partial basement, four floors and a flat roof. There are caged storage units for each apartment and technical facilities in the basement. The ground floor features the commercial area that offers yoga studio along with a massage spa. The building boasts 11 apartments of various size options such as 1-bedroom, 3-bedroom and 4-bedroom. Vertical construction pillars are made of grinded Porotherm bricks while the basement has reinforced concrete walls. The floor is made of cast-in-place reinforced concrete slabs. The building facade is ventilated covered with cemented threaded tiles and mineral insulation from stone wool.
|
|
|
Retirement home
Lišková, Jana ; Peterka, Tomáš (referee) ; Müller, Jan (advisor)
The projected retirement home is located in the cadaster of the town Velká Bíteš. The building is designed with respect of resident's needs of retirement age. It is a four-storey building without basement. There are designed external doctor's offices on the first floor. There are lounge with library and technical facilities on the first floor as well. Besides that, we can find accomodation spaces from second up to fourth floor. The structural system is a longitudinal wall and ceilings are made by monolithic reinforced concrete. The roof is shed. The building is detached with built chambers
|
|
|
Family house for two generations
Kuklová, Jana ; Novák, Michal (referee) ; Donaťáková, Dagmar (advisor)
The subject of the bachelor's thesis is the new construction of a detached two-generation family house in Horni Herspice, in the form of project documentation for construction. The object is designed as two separate units. One designed as barrier-free for the elderly, the other designed as a family house for a family of four. The building is designed as a masonry with reinforced concrete ceilings.The perimeter load-bearing masonry is made of 300 mm thick ceramic brick blocks and insulated with a 180 mm thick ETICS contact thermal insulation system. The internal load-bearing masonry is suitable from ceramic brick blocks 300 mm thick, the bathrooms are insulated from the room by an acoustic ceramic partition 200 mm thick. The internal non-load-bearing masonry is designed from 115 mm thick ceramic brick blocks. The staircase is designed as a reinforced concrete monolithic. The floors are designed as heavy, floating. The roof above the 1st floor is designed as a green flat roof, above the 2nd floor there is a single-skin flat roof. From the second floor there is access to the terrace. Hole fillings are designed as plastic. Behind the building is a spacious garden.
|
|
|
Multifunctional building
Růžička, Antonín ; Třeštíková, Jana (referee) ; Berková, Petra (advisor)
Diploma thesis Multifunctional building is compiled in the form of project documentation. The building is located in Brno, Vinařská street. It´s a building with four overground floors designed primarily to housing and one underground floor, which is mainly used as collective garage. The building will be made from POROTHERM blocks with the mineral heat insulation. The ceilings will be made of reinforced concrete. The building has a single-layer flat roof.
|
|
|
Detached house
Nejedlá, Anna ; Chomová, Štěpánka (referee) ; Jelínek, Petr (advisor)
The bachelor's thesis on the topic of a family house deals with a part of the project documentation for the construction implementation. The family house is located on a slightly sloping plot in Boršov nad Vltavou, near České Budějovice. The building consists of two above-ground floors and a partial basement. The structural system of the partial basement is designed with calcium silicate bricks. The residential part of the building is constructed with aerated concrete blocks and covered with a gable roof. The ceiling structure is made of monolithic reinforced concrete. The house is designed as a single housing unit for a four-member family.
|
guest ::
