|
|
Miniaturized Measurement System for Wind Speed Estimation.
Štěpánek, Michal ; Vágner, Petr (referee) ; Urbanec, Tomáš (advisor)
This thesis is analysis of thermal anemometer, which contains design and realization. For measuring wind speed there are not used any mechanical moving parts in this way. This measuring uses two thermistors. One of these measures temperature of air, which is very important for compensation of whole system. Temperature of second thermistor is kept on constant value. This value is higher than surrounding air temperature about constant difference. Fluctuant air cools this sensor and because of that systém must supply more of heat. By analysis of value of supplied heat, we can calculate the wind speed value.
|
|
|
Selective Circuits - Laboratory Experiment
Košťál, Stanislav ; Vágner, Petr (referee) ; Urbanec, Tomáš (advisor)
The aim of this thesis is to describe the distribution and behavior of selective circuits and methods for their implementation. There are formulas provided for the calculation of the frequency components of selected second-order RLC filters. It further describes the choice of filter frequency components and computing relationships needed for the construction of coils. The work also includes a description and complete information needed for making measurements of the measurement of the RLC band-pass. The annex to this work includes all the materials needed for implementation of laboratory tasks designed to measure using the product.
|
|
|
PC Controlled PLL Synthesizer
Málek, Miroslav ; Šrámek, Petr (referee) ; Vágner, Petr (advisor)
The aim of this bachelor´s thesis is a practical realization of computer controlled PLL synthesizer using USB serial port. FT232RL was used as an interface between the PLL synthesizer ADF4110 and PC. A software with graphical user interface was also developed in order to control registers of the syntesizer.
|
|
|
Computer modeling of communication systems
Polášek, Jiří ; Vágner, Petr (referee) ; Raida, Zbyněk (advisor)
The thesis will focus on using the program Ansoft Designer, more precisely, its module System Design, during simulation involving communication systems. A few examples show the work with the program on simulating the communication system without coding, and then with coding according to the standard 802.11 (Wi-Fi). The thesis also deals with creating custom blocks communication schemes. Described the creation of blocks and then their test.
|
|
|
LCD Matrix Display Driver
Satora, Ondřej ; Šebesta, Jiří (referee) ; Vágner, Petr (advisor)
The aim of my semestral project is a realisation of a driver matrix LCD from older NOKIA mobile phones with the PCD8544 chip. This driver is situated between an LCD and a device using it. The proposed driver should cover rendering graphical elements for the main application, thus making work with the LCD easier. This saves memory needed for using the LCD as well as computing time.
|
|
|
MICROSTRIP FILTERS USING DEFECTED GROUND STRUCTURE
Vágner, Petr ; Kasal, Miroslav (advisor)
The thesis deals with the microstrip filter design using defected ground structure (DGS). The difference between standard asymmetric microstrip technique and DGS is in using the structures etched in the microwave substrate ground plane. The DGS resonant characteristics are then used in filter design. The thesis consists of three factual parts. The first one (chapter 4) introduces the use of the DGS resonators in the lowpass filter design. It involves experimental analysis of one type of the lowpass filter. The second part (chapter 5) deals with a novel microstrip lowpass filter design method using DGS. The proposed method is verified by simulations and several samples are realized and measured. Finally, the third part (chapters 7 and 8) deals with the bandpass filter design using specific defected ground structure as a resonator. The resonators are used in a coupled resonator structure. Filters of various orders and resonator configurations are designed and simulated. A combination of the DGS resonators and half-wavelength microstrip resonators is introduced as well. Selected samples are realized and measurement results are compared with simulations.
|
|
| |
|
|
Low Noise amplifier for 8,4 GHz
Svoboda, Libor ; Vágner, Petr (referee) ; Kasal, Miroslav (advisor)
This project deals with methods of design and realization of low noise microwave amplifier for X-band. The first part describes this issue at a theoretical level. Thus it contains a detailed analysis of microstrip line and its circuit components. It is followed by some specifics of microstrip filters and with mention of microwave heterojunction transistors. The last chapter of the theoretical part describes design of small-signal amplifier with focus on low noise figure. The second part, practical, shows a concrete procedure of two-stage LNA design with HEMTs, using CAD tool Ansoft Designer. This section, as well as the bachelor’s thesis, is finished with realization of amplifier and analysis of its properties.
|
|
|
Defected ground planar filters
Tomíček, Martin ; Vágner, Petr (referee) ; Raida, Zbyněk (advisor)
In the bachelor´s thesis, the microstrip low-pass filter with the defected ground is described. The project deals with the design and the simulation of the filter in Ansoft Designer, confrontation of results between simulation and realized low-pass filter and the discussion of obtained results.
|
|
|
Magnetic Loop Antenna with Electronic Tuning for Frequencies below 30MHz
Svoboda, Luděk ; Vágner, Petr (referee) ; Urbanec, Tomáš (advisor)
The aim of this bachelor's project was realization of a tuning system with complete software and testing of the system's functionality and parameters of antenna. The system is divided into two parts, tuner and controller. The tuner implements change of circuit capacity by switching capacitor series. For switching is used transistor with small transitional capacity but small maximal collector current, too. This parameter restricts the use of system. The second part, controller, uses microcontroller AT89C2051. The microcontroller switches capacitors (and thus sets frequency) according to requests sent from PC with control software. The functionality was checked by tests with network analyzer.
|
guest ::
RSS feed.