|
|
Lead-acid baterry charger with automatic cycle
Moravec, Pavel ; Friedl, Martin (referee) ; Steinbauer, Miloslav (advisor)
The lead-acid batteries are still important and very often used type of battery even in 21st century. This project is focused on development of charger, which provides fast, but save charging of batteries with respect to maximum life time and reliability. The developed system uses constant current charging and constant voltage charging methods. It's specialized in charging batteries with liquid or gel electrolyte and traction types of batteries, which works with 12 V value of voltage. It's able to charge safely the deeply discharged batteries and when battery is unpluged for a long time, it can keep its capacity at maximum level too. The charger can choose optimal charging process according to the discharged level of battery. Each charging phase is interpreted by light signals and the achievable charging current is 20 A.
|
|
| |
|
|
Numerical modelling and measurement of the magnetic susceptibility in inhomogeneous materials by the NMR technics
Julínek, Michal ; Steinbauer, Miloslav (referee) ; Fiala, Pavel (advisor)
This bachelor work is concerned in magnetic susceptibility of specific object (glass cube filled with clay, with glass sphere in the centre). In the first part determining of magnetic susceptibility of object was carried out. Measuring was conducted on tomograph of ÚPT AV ČR. Method of gradient echo, which allows magnetic susceptibility determining of non-magnetic materials, was used. Distribution of magnetic field within the object was acquired (object was measured with and without sphere), the change of magnetic field (between object with and without sphere) was subsequently determined. In the second part, magnetic field simulation of the same object in the ANSYS software was performed. Calculation was conducted on 3D model by the finite element analysis. Distribution of magnetic field of object was acquired as a result of simulation. Results from simulation were compared with experimental findings.
|
|
| |
|
|
Optimization of the experimental NQR spectrometer
Segiňák, Ján ; Král, Bohumil (referee) ; Steinbauer, Miloslav (advisor)
The thesis deals with the NQR spectroscopy, which is one of the modern non-destructive measurement and diagnostic methods for the characterization of various materials. It is using a quadrupole moment - a property of atomic nuclei of certain isotopes. A method of nuclear quadrupole resonance (NQR) is in principle very similar to nuclear magnetic resonance (NMR). Thesis in the theoretical part analyse the principles of NMR and NQR, describes the possible use of this method to detect for example explosives, drugs, and other chemicals. In the following chapters are analysed the key parameters of NQR spectrometer and the principle of the chosen measurement method. The practical part deals with the individual components of NQR spectrometer, the design of possible improvements and programming of the measuring sequence. In the final chapter are processed the measurements of the submitted samples.
|
|
|
Design measure amplifier for magnetic measurement
Hejtmánek, Tomáš ; Steinbauer, Miloslav (referee) ; Roubal, Zdeněk (advisor)
The purpose of this semester work is a design of a measuring preamplifier for a fluxmeter DTEE which is used for hysteresis loops on ferromagnetic materials measurements. Having respect to measure coils’ characteristics and processed voltage levels with ranges in nV and µV, there was necessary to investigate measure principles of such low voltage. And then choose an appropriate operational amplifier based on the result. Mainly with minimum input residual voltage and offset temperature dependency. Also was necessary to propose effective zero compensation and eliminate thermoelectric influence in the whole designed device. There was applied noise optimization of selected operational amplifier in PSpise software. The designed device will be assembled and tested. The given results will be evaluated together with possibilities of application for a measurement purposes in labs.
|
|
|
Fast optical receiver for measurement application
Žádník, Jakub ; Steinbauer, Miloslav (referee) ; Drexler, Petr (advisor)
This bachelor's thesis analyzes the problem of a detection of analog optical signals on frequencies nearing 100 MHz. The theoretical part describes a principle of the basic photodiode types and their parameters including their equivalent circuit and parasitic characteristics. Next we discuss the ideal circuit selection and its components, especially the photodiode and operational amplifier. In the practical part we simulate the circuit in the software Tina-TI and measure chosen photodiodes. After that, real circuit boards are designed, constructed, soldered, tested and adjusted to achieve the best performance possible.
|
|
|
Sources for electric fence
Surovec, Vojtěch ; Murina, Milan (referee) ; Steinbauer, Miloslav (advisor)
Bachelor’s project is divided to two parts. The First part is focused theoretically and the second part is focused practically. In the theoretically part we met the standartds of properties and application commercially avaible sources as well as of principle pulse (switch-mode) sources and circuit realization. In practically part is suggestion of circuit design and realization of source for electric fence, enebling becked up power 230 VAC / 12 VDC. The source have to contain control circuit for reliable function.
|
|
|
Innovating a laboratory task: Inspection of electrical wiring and devices
Klement, Petr ; Steinbauer, Miloslav (referee) ; Kadlec, Radim (advisor)
The bachelor thesis deals with the innovation of laboratory tasks, called Inspection of Installation and Equipment. The aim is to construct a device that will be able to simulate errors during the inspection on the appliance. The task will be extended to build the appliance itself, which will be measured and further simulated errors. The REVEXprofi digital measuring instrument will be used for measurement. The safety of the device will be ensured by the measuring properties of the REVEXprofi instrument, by storing the circuit inside the built-in device and by the small overlaps of the measured values above the standard when the error is triggered. The circuit was simulated using the TINA 9.0 program.
|
|
|
A Practical Panel for Smart Home Wiring
Pospíšil, Josef ; Steinbauer, Miloslav (referee) ; Kadlec, Radim (advisor)
This bachelor thesis deals with intelligent installations in buildings using centralised system inels. Individual components of this system, such as the central unit, power supply and separators, are described. Used busbars and their connection possibilities are mentioned in the next part together with different ways of access to the central unit. The thesis also includes the visualisation of the demonstration panel, which will be used as a model in laboratories. Next part consists of the basic functions simulation and verification of their functionality. Finally the formation of the panel together with its connection and programming is described. The panel documentation is enclosed at the end of the thesis.
|
guest ::
RSS feed.