|
|
Streamlining of the production of a component into the aircraft engine
Bula, Tomáš ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
The thesis deals with innovation of the technological process of casting called Fan support in the company Honeywell Aerospace Olomouc s.r.o. The first part of the thesis is dedicated to component description which is made of titanium alloy Ti-6Al-4V. The section is also devoted to jet engine TFE 731, which is the engine where our particular component has specific function. Another part is focused on theoretical analysis of material characteristics of titanium alloys and their machinability. In the following section there are considered alternatives of machine suppliers with subsequent selection of the multifunctional CNC milling-turning center DMC 80 U duoBLOCK equipped with Jetstream technology. The transfer of the production to another machine is accompanied by an innovation of the technological process, making new fixtures and optimalization of the cutting tools. The section is also dedicated to static analysis of the component in operation 7 supported by finite element method (FEM). The final part of the thesis includes evaluation of the costs and savings achieved by innovation of the technological process.
|
|
|
A proposal of production technology of a hinge part
Urbánek, Vojtěch ; Zemčík, Oskar (referee) ; Sliwková, Petra (advisor)
This thesis is aimed on proposal of production technology, NC codes and production of selected hinge part. The theoretical part describes the technologies of milling, surface grinding and hole grinding as technologies used during production and as non-production technologies of CAD/CAM software. Selected production machines and cutting tools are also specified and a technological process is proposed including all the steps and operations for the production of the hinge part. According to the proposed production plan, the work in two different CAM systems for the NC code of the machining center is described. The practical part describes the production on a CNC machining center and grinders. The economic evaluation summarizes material costs, setting production costs and the production and cooperation costs.
|
|
|
Thermography in engineering
Koten, Jakub ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This work deals with non-contact measurement of surface temperatures. The aim of the first part is to explain basic terms, principles and ways of measuring temperature. Furthermore, there is an overview of thermal imagining cameras usable in industry. In the practical part there is a theoretically suggested experiment, which monitors the dependence of the surface temperature on the size of the cross-section of the workpiece during the turning under unchanged cutting conditions. Experimental measurements are executed with using thermocamera ThermaCAM SC 200 and they are evaluated in software called Researcher.
|
|
|
A proposal and manufacturing of temporary dental restoration
Jiroušek, Jan ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This bachelor thesis deals with manufacturing of temporary dental restoration. Theoretical part contains an overview of types of dental restorations and their division, Furthermore it states important properties and division of the dental materials used nowadays. The next point of theoretical part is an overview of the technologies of dental restorations manufacturing used at present. Practical part is aimed at manufacturing of temporary dental restoration by using the digitization by intraoral scanning, design of restoration in CAD software and CAD/CAM manufacturing. The thesis is concluded with discussion comprising a summary and evaluation of the results of single steps from practical part.
|
|
|
Sinumerik tools for programming of rotational machine part
Slavík, Daniel ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This diploma thesis deals with a manufacture of rotating mechanical component on CNC lathe machine with Sinumerik control system. At first the chosen component is briefly described and then NC program is created in Sinutrain Operate 4.5 system. Afterwards the program is verified by simulation. Within the diploma thesis a technological documentation is elaborated that contains a new technological course of manufacture and a manufacture drawing of the component. The final part of this thesis is focused on technical-economic evaluation of newly designed manufacture with verification of cutting conditions and required output of the CNC machine. The outcome of the thesis defines an hour rate of CNC lathe and price of component that regards to newly presented manufacture.
|
|
|
The racionalization of machining of gearboxes
Sádlo, Dominik ; Růžička, Petr (referee) ; Sliwková, Petra (advisor)
Content of the thesis is the proposal of new technology using machining centres, including five controlled axis. Benefit of implementation the new nechnology is investigated at machining example, which is the gear housing of a single stage gearbox, manufactured in the company. In the first part of the thesis, the general properties of gearboxes and their housings are analyzed, as well as the procedure of the current proces of the machining representative. In practical part of the thesis is proposed necessary tool equipment and jig equipment, needed for machining of the part. After that are analyzed and filled in time studies, provided by manufacturers of machining centres. On the bases of these studies, were calculated operating times and operating costs per one piece of the housing. In the part of technical and economical evaluation is calculated the return of initial investment, including costs for byuing new machining cente and cutting tools equipment. Finaly are evaluated the overal benefits of the new technology, given the needs of the company.
|
|
|
Analysis of chip forming mechanism with a high-speed digital camera
Tichý, Vojtěch ; Sliwková, Petra (referee) ; Polzer, Aleš (advisor)
This thesis covers matters related to high-speed digital cameras and their usage in various spheres of human activities, mainly in research of chip forming. Thesis summarises important knowledge needed for creation of high-speed recordings and choice of suitable lenses. Focus is taken on creation of high-speed recordings of chip forming process in turning operation outside grooving by using of different types of chipformers. Main goal is to verify its functionality in specific value range of feed per revolution.
|
|
|
Tools for threading and their use
Veselý, Václav ; Polzer, Aleš (referee) ; Sliwková, Petra (advisor)
The bachelor’s thesis Tools for threading and their use deals with issues connected to tools, the materials used and their usage in the field of mechanical engineering. Individual parts of the thesis cover types of tools for threading, methods of threading and materials suitable for tap making. Further, the range of monolithic milling taps in the producers’ supply is also analysed.
|
|
|
Desing and Production of Plastic Adapter to Floor Nozzle
Černý, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
This work deals with the design and manufacture of prototypes of plastic reduction to the floor nozzle. Individual shapes and dimensions of the reduction are designed and constructed in 3D parametric software Autodesk Inventor. Models of reduction are produced using an additive method of Fused Deposition Modeling utilizing a 3D printer uPrint. Work is completed techno-economic evaluation with the subsequent analysis and overall evaluation of the applied technology.
|
|
|
Optimisation of machining process for an industrial application and a CNC machining centre
Soukupová, Veronika ; Sliwková, Petra (referee) ; Píška, Miroslav (advisor)
Tato diplomová práce byla vypracována v průmyslovém kontextu, během stáže ve firmě Metso. Zlepšení obráběcího procesu zajišťovacích šroubů bylo cílem této práce, aby byla umožněna budoucí automatizace zakládání obrobku do stroje. Zlepšení bylo zhodnoceno na základě úrovně autonomie během obrábění, eliminace neprogramovaných zastavení stroje operátorem a dostačujícího odvodu třísek. Implementace automatických systému do číslicově řízeného obráběcího centra umožňuje zvýšení produktivity. Před automatizováním obráběcího procesu však musí být proces optimalizován. Zejména dostatečná fragmentace třísek a jejich evakuace jsou klíčové. Dlouhé nedělené třísky můžou poškodit systémy jako například automatický měnič nástrojů, dopravník třísek nebo průmyslového robota. Dostatečná lámavost třísek může být zaručena správným výběrem technologie a strategie obrábění, výběrem řezného nástroje a řezných podmínek pro daný materiál obrobku.
|
guest ::
