|
|
Wireless Energy Transfer
Lašo, Matej ; Paar, Martin (referee) ; Krbal, Michal (advisor)
The aim of this Bachelor's thesis is to give complex information about wireless energy transfer and its historical evolution. The thesis then continues with describing the devices that are using wireless energy transfer and the effects this method is having on human health and the ways protecting against its effects. The second part, concerning practical measurements, aims at measuring on special pads using the wireless transfer on which I have made all my calibrations and measuring of magnetic flux and efficiency of this transfer.
|
|
|
Genetic Algorithm Design for Distribution Network Outfits Optimalization
Ondruš, Tomáš ; Skala, Petr (referee) ; Paar, Martin (advisor)
The work deals with genetic algorithms and their potential use in application software to optimize high voltage switching elements of distribution network. Theoretical part explains the basic concepts of genetic algorithms such as a gene, population and chromosome and basic principles of the development of genetic algorithms.. The main task of the thesis is to design the algorithm that will simulate the distribution of the sectionalizers by telecontrolled section switches or reclosers and analyze how to set the the parameters affecting the convergence speed of genetic algorithm. The basic parameters affecting the convergence of breeding, mutation probability, population size or using of elitism. The second goal is finding a suitable set of input parameters for the selected population sizes without and with using elitism. The results of the work determine the most appropriate settings for each generation and determining the approximate number of generations needed to find the best solution. The genetic algorithm applocation was tested on a less extensive distribution network with six switching elements
|
|
|
Analysis of floating photovoltaic usage in the Czech Republic
Al Halabi, Enas ; Vrána, Michal (referee) ; Paar, Martin (advisor)
Tato práce se zabývá technologií plovoucí fotovoltaiky, její strukturou, komponenty, vhodnými vodními plochami, výhodami a výzvami. Dále poskytuje přehled na její historie plovoucích elektráren a jejich nasazení na světě. Je popsáno základní hodnocení umístění pro instalaci FPV. Jako hodnocený vodní plocha byla vybrána vodní nádrž Nové Mlýny, v této lokalitě byl navržen a popsán plovoucí FV systém. V této studii je zmíněna srovnávací analýza s cílem porovnat konstrukci, náklady, provozní prostředí a výrobu elektrické energie plovoucího a pozemního fotovoltaického systému.
|
|
|
Testing of Control and Logic Functions of Feeder Terminal
Kaplanová, Klára ; Paar, Martin (referee) ; Orságová, Jaroslava (advisor)
This work occupies itself with an analysis of operational manipulations in the feeder terminal of the distribution system and it considers the configuration of its apparatus equipment with the following configuration of the logical operations for controlling the apparatus in the feeder terminal. Further, this work occupies itself with switching high voltage equipment, their qualities and distribution, with their electrically driven mechanism, including the method of their control. Moreover, the work is aimed at the configuration of the logical operation with the aid of the Boole functions for controlling the feeder terminal apparatus within the CAP 505 software, and at its following testing on the REF 543 terminal from the ABB Company. The aim of the work is theoretical analysis of controlling and operational manipulations in a high voltage distribution system, the following creation and registration of the blocking conditions as well as with their use to create a functional configuration of the feeder terminal of the distribution system and its testing on the demonstration panel which is set with the REF 543 terminal and with further apparatus equipment that simulates the complete high voltage distributor. In the factory configuration the simulation is carried out by the LOGO! module from the Siemens Company. Therefore, our further aim is to design and subsequently to connect the feeder terminal so that the controlling and signaling panel elements could be connected directly to inputs and outputs of REF 543 terminal and could so enable its controlling and checking of the operation conditions. The main aim of the work is to elaborate a detailed description of the functional configuration creation as well as the following REF 543 terminal adjustment for testing the blocking conditions.
|
|
|
3-phase Power Factoctor Corrector Units for Laboratory Training
Plucnara, Roman ; Paar, Martin (referee) ; Drápela, Jiří (advisor)
The aim is to describe the issue of compensation factor. The thesis describes the methods and individual implementation of compensation unit from rotating compensators, used until now protected compensation section and active filters. It also describes the influence of processing and elimination of higher harmonics present in the compensated circuits. The following are simple phasor diagrams and relevant patterns. The practical part shows these preconditions used to create laboratory exercises. Individual solve specific practical task illustrate the importance of reactive power compensation is using sophisticated, compensation elements used, for example, reactive power regulators. It reflected the simplest possible compensation the power factor, using the manual switching of capacitor banks.
|
|
|
Island operation of the waste to energy facility
Doležal, Václav ; Paar, Martin (referee) ; Ptáček, Michal (advisor)
The purpose of this bachelor’s thesis is mainly a technological explanation of, be it present-day or potentionally future, possibilities of waste-to-energy facilities technology in Czech Republic and explanation of technological devices used in SAKO Brno institution for successful transition to island mode operation. A significant part is a research on the role of the discussed waste-to-energy facilities during power recovery in distribution network, while taking into consideration the ability to transition to the island mode operation, thanks to which it can hold an important position during the process and the analysis of a possible scenario of black-out, that the waste-to-energy facilities of SAKO Brno company couldn’t cross over to island mode operation, based on the results of the black system event that took place in the year 2013.
|
|
|
Energetic problems of induction electroheat equipments
Milka, Jiří ; Paar, Martin (referee) ; Lázničková, Ilona (advisor)
Induction heating is mostly used for melting metal materials in metallurgy. The principle of induction heating comes from electromagnetic induction which generates eddy currents heating the charge in electrically conducting material. The first part of the bachelor thesis is devoted to the principle of induction heating. Further, there are possibilities of applying the induction heating in electro heat devices mentioned. As the paper is focused on energy problems appearing when getting connected to the grid, the second part of the paper contains explanation – both theoretical and on examples - of compensation and symmetrization of induction electro heat devices.
|
|
|
Design of overvoltage protections according to CSN EN 62 305
Pochop, Zbyněk ; Paar, Martin (referee) ; Bátora, Branislav (advisor)
This Bachelor's thesis deals with the procedure in designing overvoltage protections for an ordinary house according to a new set of standards CSN EN 62305. The work consists of three main parts. The first part deals with the method of risk management according to standard CSN EN 62305-2. Besides a theoretical introduction is made a risk analysis also numerically. Result of risk analysis has implications for the way forward surge protection design for the entire building. The second part deals with the external surge protection. In the second part of the text are suggestions down lead systems and primarily air terminals. Check over is subsequently verified by the methods of the protective angle method and the rolling ball. The study also addressed the issue of TV antennae on the roof near the air-termination network. The third part of this thesis deals with internal overvoltage protection, which mainly concerns the design and location of surge arresters and lightning arrester.
|
|
| |
|
|
Stabilized operation of a 110 kV power line
Leinweber, Luboš ; Paar, Martin (referee) ; Blažek, Vladimír (advisor)
My work is dealing with parameters long high voltage (vvn)110kV with wanted output parameters(voltage rating , cos? , aktive power and size of power line) namely in theoretic part as well as in practic part , which I made from required parameter values of power line. At first I did the approximate calculation by reserve power lines ( T , ? , ? , Steinmetz), by short power line , idle power lines and after that I made perfect conclusion and elaboration by the help of lines. I described these kind of calculation in the theoretic part. I compared the results and I determinated which method was te best.
|
guest ::
