|
|
BUT Center for Technology Transfer
Driják, Ondřej ; Suchánek,, Petr (referee) ; Nový, Alois (advisor) ; Novotný, Miloslav (advisor)
The building, as a subject of the bachelor project. Industrial building that is supposed to be a place for new technologies, new machinery and new chemical elements, invented by the students of the Brno technical university. The shape of the building was being developed gradually. First sketches were originated at the atelier, the origin of the building was given the shape according to the estate. After the complex project was selected by the university, the facade and the disposition of the building have been further developed up to the final state. The building is divided into three parts: administrative, laboratory and technological. The special feature is that all the floors are not on the same level. The administrative and the laboratory parts are on the same level, and have three floors. Technological part has two floors, with completely flexible access of the cargo elevator. The basement is used as a parking area for employees. The roof has a surface with the skylight installations. I was working on the project by myself, with the help of professor A. Novy CSc. And M .Novotny CSc. For this project I used Neuferts documents and CSN, including the materials from the lectures of industrial building. As an architect I was supposed to create an architectural project on the above mentioned theme “Form construction and function”
|
|
|
Detached family house, Křtěnov
Jílková, Kateřina ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
This thesis deals with the design of detached house. The building is situated on a slightly terrain in cadastre unit of Křtěnov. Family house is T-shape and is a two-floor building without basement. The house is design for a family of four. External walls are constructed from ceramic blocks Porotherm and insulated by contact thermal insulation system. Ceiling are designed as a cast-in-place reinforced slabs. The house is roofed with gable roof with a sloupe 35 degrees.
|
|
|
Family House Červený kopec
Salagová, Lucia ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this Bachelor Thesis is the execution-stage construction project design of a house with a business establishment. The building is to be situated in a sloping piece of land of Kejbaly Street within the cadastral area of Brno City. The lowest floor is embedded into the slope in order to ensure good linkage to the terrain. The building has two more floors, both above ground. The part of the establishment facility is intended to be used as a projection office of the investor. The building is grounded on strips of reinforced concrete, with wall bearing structural system. The underground floor is made of absorptive formwork; the aboveground floors are made of ceramic bricks. The ceiling structures are of reinforced concrete. The object is covered with a flat single-ply roof, part of which is designed as a green roof.
|
|
|
Extensions of the Pension Sebranice
Ludvík, David ; Tichomirov,, Vladimír (referee) ; Novotný, Miloslav (advisor)
This diploma thesis deals with the design of a two-storey extension of a penzion house in Sebranice near Boskovice. The building is located on a flat terrain and is adjacent to the existing building of a country house. The building has a ballroom, new facilities for the existing building, wellness, garage, reception, meeting room, dining room and seven accommodation units for temporary accommodation for a maximum of 18 people. The vertical load-bearing structures are designed from a structural system of ceramic blocks of the HELUZ systém, the building are based on foundation strips. The ceilings and stairs are monolithic reinforced concrete. The roof is sloping, saddle, formed by a purlin system. The work contains project documentation for the construction.
|
|
|
Guest-house Repechy
Janík, Tobiáš ; Hubáček,, Petr (referee) ; Myslín, Jiří (advisor) ; Novotný, Miloslav (advisor)
This bachelor thesis is based on an earlier project made in third year of bachelor study. It is a reconstruction of former rustic building, which was built probably in early 20 century. Area is located in Repechy village, which is part of Village Bousínov in Olomouc region, Prostějov district. Current building was built in several stages. The oldest part of the building is northwest wing, semi cellared, with non-habitable attic. After that cowsheds were built, so the buiding gain character of enclosed building. As final modification, the atrium was roofed with metal roof. Whole building was used to breed cattle, which is one of the main reasons, why is the building in such a horrid state. Main goal of bachelor thesis was to rebuild this building into pension with wide freetime activities such as hiking, cycling, horse riding, hyppotherapy, fishing and even ice-skating in winter. Due to the emergency state of the object the reconstruction is more or less forced. Only three bearing walls from the oldest part of the building and one facade were preserved. Whole architectional solution is trying to put old and new into contrast. It is most visible in west corner, where historical facade switch to the glass facade and on the roof, which is placed on classical wooden roof frame, but is shielded with glass plates in alluminium frames. The main entrance is situated in preserved facade. In the ground level, there is reception, restaurant, technical facilities and six rooms for guests. Second floor is fully reserved for accomodating guests. East wing has one floor and the flat of owner is situated in here.
|
|
|
Small Apartment House
Holubář, Zdeněk ; Novotný, Miloslav (referee) ; Šuhajda, Karel (advisor)
The topic of bachelor´s thesis is design four storey apartment house with barrier-free apartments. The building is four storey, roofed truss roof. There are three garage units and storage area underground. The building is located on plot of number 3800/32 in the village Velke Mezirici, cadastral area Velke Mezirici. The vertical constructions are designed from a construction system made of ceramic blocks. The ceilings are ceramic and the roof is hipped with trusses. The thesis provides documentation for realization of the construction. Part of the design is thermal assessment, accustic assessment and fire safety assessment.
|
|
|
Detached House with an estab
Mareček, Patrik ; Novotný, Miloslav (referee) ; Čuprová, Danuše (advisor)
The aim of my bachelor´s work was a project of a new family house with a geodetic office in the land register of Senica in the housing development. The object is a two storey building that is partially with basement. It has a basement, first and second floor. There is a garage as a part of the house. The family house is designed to suit a 4 -6 member family. The garage is designed for two cars. The office is suitable for two employees. The main entrance of the building is situated to the west.
|
|
|
Reconstruction of the Knurr palace, Fulnek
Kvapilová, Vendula ; Cigánek, Jiří (referee) ; Novotný, Miloslav (advisor)
This diploma thesis deals with the reconstruction and rehabilitation of a real cultural monument in Fulnek. It is a four-winged object with almost rectangular atrium. The main subject of the diploma thesis is the change in the use of the building and the proposals for remediation of damp walls. Knurr's palace has three above-ground floors and is non-decked, covered by a classic shell with fiber cement. The use of the object is mainly designed as a civic amenities, now the building is not used. The building is located in close proximity to the slope and the building is adjacent to the building. The project is solved at the level of the documentation for construction.
|
|
|
Detached family house, Valašské Klobouky
Fojtů, Ondřej ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
The bachelor’s thesis deals with the new detached family house witch is situated in the town’s residential area of Valašské Klobouky. The land has a sloping character. The building is a two-floor, partial basement house with a garage and a terrace in the ground-shaped rectangle with dimensions 11x14 m. The object is designed for a four-member family. The external and internal vertical structures are made of sand-lime blocks of the KM BETA SENDWIX system, horizontal structures are made of reinforced concrete floor. The house is insulated with the ETICS contact isulation system. The bulding is roofed with hipped roof of wooden trusses with a slope of 15. The bachelor’s thesis has the form of design documentation for the building process.
|
|
|
Carpenter of Slaný
Cach, Ladislav ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
The thesis theme is a carpentry production facility with the adjacent office building at Slané. The thesis deals about the proposal of the object with building and construction solutions of the building. The thesis includes a detialed solution of the exhaustion ventilation the technology part of the carpentry. In the office building there is a reception in the 1st floor and the exhibition spaces. The vertical communication in the building is solved by two-arm straight starcases, one in office building and the second in the annexe hall for the employes. The construction system of the hall is reinforced concrete prefabricated system with advanced prestressed girders. Office building is designed like a reinforced concrete monolithic frame. Buildings are divided by dilatation. The object is based on the footings which are connected to base thresholds. The rooftops of the objects are flat.
|
guest ::
RSS feed.