|
|
Blended alkali-activated aluminosilicate binders
Mizerová, Cecílie ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The first part of the work presents a summary of the current knowledge of two-component blended alkali-activated binders based on blast furnace slag, fly ash, metakaolin and ground brick with emphasis on their workability, microstructure, mechanical properties and durability. In the experimental part the alkali-activated binders with different ratio of fly ash and metakaolin were made to compare their workability and mechanical properties. The binder structure was evaluated by means of scanning electron microscopy (SEM) and mercury intrusion porosimetry. From the literature review and my own achievements it can be concluded that the combination of single precursors has a positive effect on the majority of the assessed properties of the material.
|
|
|
Binary alkali-activated composite materials with brick powder
Mizerová, Cecílie ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The thesis is focused on the application of brick powder in production of binary alkali-activated binders with metakaolin, slag and fly ash. The theoretical part summarizes recent fields of use of the ceramic waste in construction and binder industry and prerequisite properties of the brick powder for alkaline activation. Brick powder based geopolymers made in the experimental work were tested for their mechanical properties, porosity and microstructure, flow properties of the fresh geopolymers were evaluated by rheometric measurements. In accordance with the results it can be concluded that brick powder could be a suitable precursor for blended binders with metakaolin and slag, these samples exhibited good mechanical properties and microstructure characteristics. The combination with fly ash was less applicable due to a rapid setting, hardening retarder used in these binders caused significant deterioration of the mechanical properties of the material.
|
|
|
Self-Sensing Properties of Metakaolin Geopolymer with Carbon Nanotubes under Compressive Loading
Mizerová, Cecílie ; Rovnaník, Pavel ; Kusák, Ivo ; Schmid, Pavel
Increased capability of alkaline activated binders to transfer the electric charge became an attractive issue in research related to multifunctional materials with self-sensing, self-heating and other progressive properties. This study is focused on self-sensing properties of metakaolin geopolymer mortars with 0.05 and 0.10% carbon nanotubes under repeated compressive loading. Specimens incorporated with copper electrodes were subjected to two different regimes of compressive loading with continuous monitoring of strain and electrical resistance. Both reference and modified geopolymer mortars have shown good response to applied loading, yet the differences in sensitivity and structural deformations were observed.
|
|
|
Binary alkali-activated composite materials with brick powder
Mizerová, Cecílie ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The thesis is focused on the application of brick powder in production of binary alkali-activated binders with metakaolin, slag and fly ash. The theoretical part summarizes recent fields of use of the ceramic waste in construction and binder industry and prerequisite properties of the brick powder for alkaline activation. Brick powder based geopolymers made in the experimental work were tested for their mechanical properties, porosity and microstructure, flow properties of the fresh geopolymers were evaluated by rheometric measurements. In accordance with the results it can be concluded that brick powder could be a suitable precursor for blended binders with metakaolin and slag, these samples exhibited good mechanical properties and microstructure characteristics. The combination with fly ash was less applicable due to a rapid setting, hardening retarder used in these binders caused significant deterioration of the mechanical properties of the material.
|
|
|
Blended alkali-activated aluminosilicate binders
Mizerová, Cecílie ; Bayer, Patrik (referee) ; Rovnaník, Pavel (advisor)
The first part of the work presents a summary of the current knowledge of two-component blended alkali-activated binders based on blast furnace slag, fly ash, metakaolin and ground brick with emphasis on their workability, microstructure, mechanical properties and durability. In the experimental part the alkali-activated binders with different ratio of fly ash and metakaolin were made to compare their workability and mechanical properties. The binder structure was evaluated by means of scanning electron microscopy (SEM) and mercury intrusion porosimetry. From the literature review and my own achievements it can be concluded that the combination of single precursors has a positive effect on the majority of the assessed properties of the material.
|
guest ::
