|
|
The salt influence on aprotic electrolytes
Pojer, Stanislav ; Vondrák, Jiří (referee) ; Máca, Josef (advisor)
This thesis deals with the liquid aprotic electrolytes with solvent on the basis of sulfolane blends with other solvent, in combination with the sodium and lithium salts. In these electrolytes are evaluated their properties due to their use in lithium - ion batteries in terms of safety and electrical properties. For safety risk is measured flashpoint and for electrical properties is measured electrical conductivity for selected samples are intended capacities of double layers.
|
|
|
Aprotic electrolytes for lithium-ion batteries with higher temperature stability
Bajer, Michal ; Máca, Josef (referee) ; Sedlaříková, Marie (advisor)
Master thesis deals with safety of aprotic electrolites used in lithium – ion accumulators. Beside conductivity and viscosity of electrolytes is work focused to flashpoint of electrolytes with flame retardants. In main part of work is shortly explained lithium ion accumulator used materials and fundamentals. Flame retardancy mechanisms and used materials are disscussed too. In practical part work deals with description of used measuring methods and evaluation of gauged data. At least optimal composition of electrolyte with flame retardant is proposed.
|
|
|
Electrolytes based on sulfolan and similar solvents
Máca, Josef ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
Submitted thesis deal with study of aprotic electrolytes in order to increase the safety for use in lithno – ionts accumulators. Increase of safety is specified by measuring the flash point of each electrolytes, at the same time are evaluated also other parameters important for use in accumulators. For determine the window of temperatures where the electrolytes can work is measured by melting point. The melting point is measured by cryoscopy. From electrical properties is measured specific conductivity of the electrolyte.
|
|
|
Design of gramophone
Maca, Jakub ; Křenek, Ladislav (referee) ; Sládek, Josef (advisor)
The goal of this bachelor thesis is design of gramophone. Design is based on a close analysis of problems and is based on a knowledge gained in the search part. Turntable should act as a suitable complement in modern interior and meet the right technical and ergonomic characteristics.
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
Use of X-ray computed tomography for construction of FE models of bones
Jiroušek, Ondřej ; Jírová, Jitka ; Máca, J.
The article reports on procedures used for development of FE models of bones on basis of data obtained from series of computed tomography (CT) scans. These models include mechanical properties reflecting the bone inhomogeneity through apparent density which can be easily retrieved from the CT scans. Experimental procedures used for evaluation of mechanical properties of cancellous bone using small samples of cylindrical shape were designed in such a way, which allows for determination of the viscoelastic properties of cancellous bone. Both compressive and tensile specimens are tested while for the strain measurement an optical method utilizing CCD camera of high resolution is used. Relationship between the apparent density and mechanical properties of cancellous bone in a power-law form is proposed.
|
guest ::
RSS feed.