|
|
Deterministic Aperiodic Image Device
Horáček, Miroslav ; Meluzín, Petr ; Krátký, Stanislav ; Knápek, Alexandr ; Mika, Filip ; Chlumská, Jana ; Matějka, František ; Král, Stanislav ; Brunn, Ondřej ; Giričová, D. ; Kopal, Jaroslav ; Kolařík, Vladimír
The paper deals with the analysis, design and preparation of a diffractive optically variable imaging device consisting of a deterministic aperiodic mesh formed by basic optical elements. The theoretical basis is complemented by numerical analysis and presentation of the implemented master and its replicas.
|
|
| |
|
|
SMV-2017-04: Electron beam lithography technology development
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure.
|
|
|
SMV-2017-02: Analysis of planar microstructures prepared by compound writing method
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Research and development of materials, techniques and methodology for planar microstructures preparatio. Preparation and evaluation of a thin layers for planar microstructures making, analysis of microstructures using scanning electron microscopy and confocal microscopy, preparation of the masks for compound exposures by means of electron beam lithography, utiilization of UV mask aligner, RIE, etc., verification of the proposed methodology, evaluation of the final parameters.
|
|
|
SMV-2017-01: Relief structures based on diffractive optics
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Research and development in the field of physical realization of graphic and optical structures based on the principle of diffractive optics by means of electron beam lithography in a recording material supported by a silicon or glass board. The research covers the analysis of the graphical or optical motive, research and application of relief structures implementing the required graphic and optical properties, research and modeling of the physical possibilities of implementation of relief structures, preparation and analysis of technology of implementation of relief structures with regard to the limits of current scientific instruments, verification of theoretical considerations by means of relief structure sample exposure.
|
|
|
SMV-2017-03: Planar microstructures for optical applications
Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Krátký, Stanislav ; Chlumská, Jana ; Meluzín, Petr ; Král, Stanislav
Development in the field of planar microstructures for optical applications, physical realization of structures by means of electron beam lithography. The project covers the processing and analysis of the graphical motive, research and application of planar microstructures performing required optical properties, research and modeling of the physical possibilities of implementation of microstructures, regard to the limits of current scientific instruments in our laboratory, data preparation for e-beam lithography exposure, samples exposure, verification of properties of samples and technical documentation preparation.
|
|
|
Blaze Gratings with a Ribbed Back Slope
Krátký, Stanislav ; Meluzín, Petr ; Horáček, Miroslav ; Kolařík, Vladimír ; Matějka, Milan ; Chlumská, Jana ; Král, Stanislav
Binary relief phase-modulated gratings provide symmetrical diffraction of the incoming light beam. Asymmetrical gratings, e.g. asymmetrical triangular blazed gratings, are characteristic by an asymmetrical diffraction behavior, where one of the first diffraction orders is more important than the other one. Electron beam lithography is a suitable and flexible tool for patterning of such kind of gratings. High quality results can be readily obtained when the period of the grating is relatively large and the relief depth is relatively low, this is the case of gratings with a small blaze angle. As the blaze angle increases, the quality of result suffers from several patterning-related issues. One of the problems is a reflection of the incoming light beam from the back slope (anti-blaze facet) of the blaze grating. We propose a novel configuration, with a ribbed modulation of the back slope. This modulation is perpendicular to the direction of the grating grooves. This paper presents an analysis of the proposed blazed grating configuration. E-beam pattern generators were used to prepare a few\nsamples of blaze gratings with a ribbed back slope. One part of the experiment was performed with a Gaussianshaped beam and another one with the variable-shaped beam. Results of the experiment are presented.\nFinally, we discuss the optical performance of two blaze gratings with similar parameters, one of them is with the flat back slope and another one is with the ribbed back slope.
|
|
|
Parameter Optimization of Multi-Level Diffraction Gratings
Matějka, Milan ; Kolařík, Vladimír ; Horáček, Miroslav ; Král, Stanislav
Originally, the e-beam lithography (EBL) is a technique for creating high-resolution black and white masks for the optical lithography. Multi-level relief structures can be also prepared using EBL patterning. Their preparation is based on the image patterning with a gradient of exposure doses. Large-area multi-level structures can be effectively prepared using the electron beam pattern generator with a variable shaped beam. We present several writing strategies. Basically, the main writing strategy uses one stamp (i.e. one elementary exposure of the shaped electron beam) per one elementary area with the same exposure dose. This simple approach is fast and flexible, however it does not guarantee optimal results. The main problem is an imperfection of the stamps (size, shape, and homogeneity). Advanced algorithms are based on multiple\nexposure of the same elementary area, the total local exposure dose is a sum of several different elementary exposures (stamps). Using these algorithms, a smoother surface of the structure can be achieved. On the other hand, the writing speed is considerably decreased. Tradeoff between the achieved parameters and the writing speed is discussed for selected set of writing strategy algorithms.
|
|
|
Nanopatterning of Silicon Nitride Membranes
Matějka, Milan ; Krátký, Stanislav ; Řiháček, Tomáš ; Kolařík, Vladimír ; Chlumská, Jana ; Urbánek, Michal
Membranes are typically created by a thin silicon nitride (SIN) layer deposited on a silicon wafer. Both, top and bottom side of the wafer is covered by a thin layer of the silicon nitride. The principle of silicon nitride membranes preparation is based on the wet anisotropic etching of the bottom side of the silicon wafer with crystallographic orientation (100). While the basic procedure for the preparation of such membranes is well known, the nano patterning of thin membranes presents quite important challenges. This is partially due to the mechanical stress which is typically presented within such membranes. The resolution requirements of the membrane patterning have gradually increased. Advanced lithographic techniques and etching procedures had to be developed. This paper summarizes theoretical aspects, technological issues and achieved results. The application potential of silicon nitride membranes as a base for multifunctional micro system (MMS) is also\ndiscussed.
|
|
|
Structural Colors of Self-Similar Nano Patterns
Meluzín, Petr ; Horáček, Miroslav ; Krátký, Stanislav ; Kolařík, Vladimír
E-beam lithography is a flexible technology for various diffraction gratings origination. The e-beam patterning typically allows for the creation of optical diffraction gratings in the first diffraction order. However, the very high resolution enables also the patterning of structures providing the zero-order diffraction. Recently, we presented a work on the structural colors of metallic layers covering both regular-line structures and CGH (computer generated hologram) structures. This work presents a study dealing with zero-order diffraction structures with self-similar properties. The practical part of the work is focused on two aspects: design parameters and technological issues. Variations in design parameters include the tone of the structure (positive or negative),\nthe density of filling, the filling factor, and the depth of the structures. The achieved gamut of colors may by primarily extended by the proper selection of metal deposition technology and its parameters, and further by the proper selection of the metal and the thickness of its layer, these are the technological issues.
|
guest ::
RSS feed.