|
| |
|
| |
|
|
Motor parameter identification for laboratory stand
Lidmila, Petr ; Kadlec, Josef (referee) ; Červinka, Dalibor (advisor)
The goal of introduced thesis is to provide measurement of the engines used as a tutorial laboratory stand in the course “Electric drives”. Due to the absence of appropriate measurement centre, the main emphasis is laid on the modernization of older dynymometer, which is going to be used by the students. Dynymometer has been equipped with the electric speed and torque vbmeasurement, data from these measurements are displayed and evaluated by the digital devices very clearly and precisely. Engines parameters measurements has only marginal importance in this thesis.
|
|
|
Step down convertor
Koutný, Martin ; Kadlec, Josef (referee) ; Cipín, Radoslav (advisor)
Thesis deals with the evaluation of the solutions and the design of the DC voltage converters. The first describes the different types of converters, which subsequently choose types of resources for the construction. In other chapters of the work devoted to the design of schemes, selected types of sources and selection of circuits and components therefor, for the manufacture, including calculations cooling performance parts. The last chapter is devoted to the description of the structure and measurement of the produced sources. The measurements are primarily deals with the verification of the specified parameters.
|
|
|
High power switch-mode supplies - parallel connection
Kadlec, Josef ; Richter, Aleš (referee) ; Mindl,, Pavel (referee) ; Patočka, Miroslav (advisor)
This doctoral thesis deals with the issue of high power switched-mode power supplies that are designed as modular systems. The thesis describes series, parallel and series-parallel possibility of connected converters. System can achieve extremely high output current for converters connected in parallel. For converters connected in series, the system can achieve extremely high output voltage. The main goal of this thesis is to develop so-called reconfigurable modular system. It is a system that can change converters connection of serial, parallel or series-parallel connection - during its operation. This option to change converters connection significantly extends the control range of output voltage and output current of the whole system. For all these mentioned variants of the modular system there are described and simulated suitable control schemes. The issue of interleaved PWM is described in the thesis. Output voltage ripple and current ripple equations were derived for each converters connection. These equations, which were derived either for systems with interleaved PWM or for systems without of phase shifted PWM, are also proved by simulations. Design of reconfigurable modular system with power of 9.6 kW that contains four converters was introduced in this thesis. Converters use modern transistors and diodes of SiC material. The proposed reconfigurable modular system was successfully manufactured. The measurement results are also shown in the work.
|
|
|
Car-battery charger
Kadlec, Josef ; Procházka, Petr (referee) ; Červinka, Dalibor (advisor)
This bachelor’s thesis is considered by projection and construction of the car battery charger with switching source. One-pulsed conducting changer is base of this charger. The charger is intended for accumulators of nominate voltage 6 and 12V. Accumulators are charged by method of constant voltage with current limitation of 0.5A, 5A, 20A and 50A. Value 50A has reason during stating of car for example in winter, because the charger helps to battery. The device is equipped with additional protection, which protects the charger and also the accumulator and the supply network. Three pilot lights are the next equipment of the device.
|
|
|
SMPS design and assembly with an output of 2.5 kW
Pospíšilík, Vojtěch ; Cipín, Radoslav (referee) ; Kadlec, Josef (advisor)
This diploma thesis describe the desing and assembly of switching power supply with an output of 2,5kW. At first is described the funcional principle of SPMS. The next is the proceed design of power part of the converter composed from calculation of transformer, inductors, capacitors and sizing of semiconductors. There is proceed the calculation of power looses. The next step is to make acquaintance with the possibilities of feedback control, creating a model system for simulating and executing the selection of an appropriate regulatorystructure.The following is the calculation of regulators suitable method and simulation at program MatlabSimulink. Is procced the computing and realization of regulators and finding the PWM modulator. At over is constution of contorl logic and desin of printed circuit desing, assembly and their recovery.
|
|
|
Accumulator tester
Pisca, Marek ; Kadlec, Josef (referee) ; Cipín, Radoslav (advisor)
This master´s thesis is dealing with the theory of Li-ion accumulators and theirs charching. In this thesis has been designed accumulator tester for automatic charging and discharging of Li-ion accumulator. This tester is controlled by microprocessor.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Analysis of the working satisfaction in a company
Rubáčková, Iva ; Stříteský, Marek (advisor) ; Kadlec, Josef (referee)
The thesis contains is to identify the fundamental factors of working satisfaction at the base of theoretical knowledge, to make an analysis of the working satisfaction in the chosen company and to identify working factors, which evoke satisfaction or dissatisfaction. Correctional measures are proposed at the base of the outcomes of the research. For the research is used a questionnaire survey and the respondents are asked about the satisfaction with the remuneration, the content of work, the human relations, working conditions, possibilities of further education and personal development and career growth. They are also asked about their personal opinion of the company and the reasons for working in there.
|
guest ::
RSS feed.