|
|
Description of Stress and Strain States at Front of Inclined Cracks Loaded by Shear Modes
Roh, Marek ; Majer, Zdeněk (referee) ; Horníková, Jana (advisor)
The primary objective of this masters thesis is to assess the eects of the length of crack and the angle, of which is this crack inclined on the stress and strain states at its front for the test sample loaded under shear. The rst part of this thesis will analyze the individual approaches that lead to the description of the aforementioned conditions. The second part deals with the FEM model assembly, which will lead to the fracture parameters, the values of which will be compared in part three.
|
|
|
Analysis of composite sandwich panel under conditions simulating placement on a rocket carrier
Král, Martin ; Horníková, Jana (referee) ; Majer, Zdeněk (advisor)
This work deals with composite sandwich panels, which are currently used as supporting structures for satellites. This type of panel contains an aluminum honeycomb core and two thin laminate coatings, reinforced with carbon fibers. Laminate sandwich panel coatings offer an alternative to conventional aluminum coatings, which is advantageous mainly due to the reduction of weight and increase of the flexural stiffness of the panels. The work is a parametric study of mechanical properties for several variants of the coating of sandwich panels. These are laminate coatings, differing in the orientation of the fibers in the individual layers, as well as an aluminum alloy coating. The study is divided into two parts. The first part examines the deformation-stress response of a sandwich panel, which is simply supported at the edges and loaded with pressure. The response calculation is performed using FEM and verified by the method of sum of an infinite series. The second part investigates the deformation-stress response of the joint, (node) of two sandwich panels, which is loaded by random vibrations, aimed at simulating the mechanical environment of the rocket carrier during the takeoff of the launch vehicle. The response is calculated using FEM and verified by an experiment on a vibrating stool for a selected variant of the laminate coating of sandwich panels. The results of the work can be used for the design of baffle of the X-ray imaging device (SXI), which is part of the equipment of the space satellite of the SMILE project.
|
|
|
Description of Stress and Strain States at the Front of Cracks Loaded by Shear Modes
Žák, Stanislav ; Majer, Zdeněk (referee) ; Horníková, Jana (advisor)
The main goal of this work is the comparison of the size of the plastic zone at the crack tip for two analysis methods: an analytical linear method and an elastic-plastic analysis employing the Finite Element method (ANSYS software). All calculations were made for a crack loaded under pure shear modes. These types of loading are not sufficiently described in the literature. The first part of this work introduces the problem with the crack tip plastic zone using both linear and nonlinear fracture parameters. The second part is dedicated to the construction of the Finite Element model in the ANSYS software. The geometry of the samples and the loading levels were chosen to match an existing experimental test of the impact of shear modes on the crack behavior. In the third part of this thesis, the plastic zone radii for pure shear modes II and III are estimated using several methods and the results are compared. In the last part of this work, the same procedure as in the previous part is applied on a mixed-mode II+III loading. A result of this thesis is the assessment of the application limits of the linear analysis method used to estimate the size of the plastic zone at the crack tip for a specific geometry and material model.
|
|
|
Influence of a Notch on Stress-Strain States at the Front of Cracks Loaded by Shear Modes
Ščotka, Martin ; Žák, Stanislav (referee) ; Horníková, Jana (advisor)
This diploma thesis deals with influence of a notch on stress-strain states at the front of cracks by shear modes. Starting with fracture mechanics and its division, followed by stress intensity factor and calculate its by finite element method. Calculation is solved for two types of notches, U-notched and V-notched, both notches were modeled parametrically so their geometry was changeable and stress intensity factor were calculated for all configurations. Subsequently was solved next calculation of stress intensity factor but for shaft without notch. Finally, was evaluated influence of notch on stress intensity factor. Software for finite element method has been used ANSYS. Others calculation was provided in software MATLAB
|
|
| |
|
|
Relationship of force and deformation characteristics to the energy of deformed system
Kupka, Oldřich ; Konvalinka, Jan (referee) ; Horníková, Jana (advisor)
The bachelor´s thesis deals with the description of energy in deformed systems and their use to determine the force acting on the system and displacements caused by forces. In the first part of the thesis there are described the basic types of stresses and how it is possible to determine their strain energy and displacements. After that, strain and potential energy including their complementary components are described. Next part is explanation of the principle of virtual work, Betti's theorem and Maxwell's reciprocity theorem. In the second part of thesis, the first and the second Castigliano´s theorems are derived. Castigliano´s theorems are applied to a statically determinate and indeterminate problems.
|
|
|
Assessment of surface roughness and its influence on fatigue life
Dziubek, Jan ; Chamrad, Jakub (referee) ; Horníková, Jana (advisor)
This thesis deals with influence of surface roughness on fatigue life. In the thesis, the evaluation of the surface roughness by the profile method according to the standard ČSN EN ISO 4287 is specified. Within the work, the roughness parameters of samples with different surface treatment were determined. Then, SN-curves were drawn for samples with different surface treatments and compared with each other.
|
|
| |
|
|
Models of plastic zone on the crack front
Surovec, Jindřich ; Žák, Stanislav (referee) ; Horníková, Jana (advisor)
This bachelor thesis is about analytical determination of plastic zone shape at the crack tip using Von Mises and max yield criterions. Next goal is obtain characterictic parameters of kinked crack. Theoretical part clarifies some basic concepts needed to understand the analytical models, then follows the analytical solution itself.
|
|
| |
guest ::
RSS feed.