|
|
Memory Reduction of Stateful Network Traffic Processing
Hlaváček, Martin ; Puš, Viktor (referee) ; Kořenek, Jan (advisor)
This master thesis deals with the problems of memory reduction in the stateful network traffic processing. Its goal is to explore new possibilities of memory reduction during network processing. As an introduction this thesis provides motivation and reasons for need to search new method for the memory reduction. In the following part there are theoretical analyses of NetFlow technology and two basic methods which can in principle reduce memory demands of stateful processing. Later on, there is described the design and implementation of solution which contains the application of these two methods to NetFlow architecture. The final part of this work summarizes the main properties of this solution during interaction with real data.
|
|
| |
|
|
Problems of the mirror shutter in the LED module of the headlight
Ettler, Jan ; Hlaváček, Martin (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with methods of attaching the mirror shutter in LED modules in headlamps. The aim is to compare three methods of attachment which are used in one of the platform variants. The following are the methods of attachment, followed by the description of the light sources and functions of the LED modules; they are: riveting, hot stamping and fixation with clips. Risk associated with the assembly of mirror shutter into the light source are analysed via FMEA analysis, including also measures and actions for risk reduction – implementation of lighting of produced light sources in a special jig in the light laboratory. Vibrations tests were carried out to find out the influence of vibration on the mirror shutter in LED modules in the traffic. The tests revealed that even if the clip is incorrectly fixed (not attached to the end position) it does not affect the functionality of the module.
|
|
|
Network Performance in Virtualized Environment
Hlaváček, Martin ; Puš, Viktor (referee) ; Kaštovský, Petr (advisor)
The thesis deals with problems concerning network performance in virtualized environment. There is an opening presentation of basics and techniques of virtualization. It describes network communication issues on virtualized environment such as Xen, KVM and VMware. There are also mentioned factors affecting network communication. Finally the performance of those environments is measured and results are analyzed.
|
|
|
Optimization of technological parameters of injection plastic parts
Hamáček, Richard ; Hlaváček, Martin (referee) ; Kandus, Bohumil (advisor)
This project is dealt with optimalization of moulding procedure of plastic housing of headlamp for project DCW 204 Mopf halogen. The aim is reach a shorter injection moulding cycle time with keeping of claim quality of plastic part. Optimalization will be done based on modification of moulding pressing time. We observe warpage in axis X in the most problematical points of housing by using of contactless measuring optical technologie ATOS III Triple Scan. Simulation analysis for injection moulding was used for prediction of housing warpage up to unforming in every chosen moulding pressing time. According to reaching data in this way comparison of predicted warpage was able to done up to unforming time and real warpage of housing after unforming. According to reaching data in a different period of time warpage of housing during time flowing was observed.
|
|
|
Systémy měření rozměrů a tolerancí v technické praxi
Hlaváček, Martin
The presented bachelor thesis researches the area of length measurement in engineering practice. It describes the possibilities of measuring length dimensions in practice using modern measuring systems. First, basic concepts in engineering metrology, measuring procedures and an introduction to basic length measuring instruments are defined. This is followed by an introduction to more advanced, more accurate measurement systems, namely measurement using pneumatic, electronic and optoelectronic gauges. The work mainly focuses on measurement using coordinate measuring machines in engineering practice. It also deals with the measurement of surface profile, especially the mean arithmetic roughness Ra. The thesis concludes with a discussion of modern measuring methods and outlines the shift in the use of coordinate measuring machines in engineering practice and anticipated future developments.
|
|
| |
|
|
Problems of the mirror shutter in the LED module of the headlight
Ettler, Jan ; Hlaváček, Martin (referee) ; Kalivoda, Milan (advisor)
This bachelor thesis deals with methods of attaching the mirror shutter in LED modules in headlamps. The aim is to compare three methods of attachment which are used in one of the platform variants. The following are the methods of attachment, followed by the description of the light sources and functions of the LED modules; they are: riveting, hot stamping and fixation with clips. Risk associated with the assembly of mirror shutter into the light source are analysed via FMEA analysis, including also measures and actions for risk reduction – implementation of lighting of produced light sources in a special jig in the light laboratory. Vibrations tests were carried out to find out the influence of vibration on the mirror shutter in LED modules in the traffic. The tests revealed that even if the clip is incorrectly fixed (not attached to the end position) it does not affect the functionality of the module.
|
|
|
Network Performance in Virtualized Environment
Hlaváček, Martin ; Puš, Viktor (referee) ; Kaštovský, Petr (advisor)
The thesis deals with problems concerning network performance in virtualized environment. There is an opening presentation of basics and techniques of virtualization. It describes network communication issues on virtualized environment such as Xen, KVM and VMware. There are also mentioned factors affecting network communication. Finally the performance of those environments is measured and results are analyzed.
|
|
|
Memory Reduction of Stateful Network Traffic Processing
Hlaváček, Martin ; Puš, Viktor (referee) ; Kořenek, Jan (advisor)
This master thesis deals with the problems of memory reduction in the stateful network traffic processing. Its goal is to explore new possibilities of memory reduction during network processing. As an introduction this thesis provides motivation and reasons for need to search new method for the memory reduction. In the following part there are theoretical analyses of NetFlow technology and two basic methods which can in principle reduce memory demands of stateful processing. Later on, there is described the design and implementation of solution which contains the application of these two methods to NetFlow architecture. The final part of this work summarizes the main properties of this solution during interaction with real data.
|
guest ::
RSS feed.