|
|
Chassis Electrical Systems
Slaběňák, Patrik ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Travelling by bus is very extended in present and safety return home is a wish of every passenger. Outcome of this bachelor work is a survey of the most used stability systems, used in cars and facilitating the work of drivers in critic situations. Among others, this work contains the survey of powers acting on a vehicle during the ride. This powers influence impending slippery road on aggravated adhesive conditions. Individual systems are described attentively and supplemented by illustrating pictures, which near this issue and facilitate the real idea of functionality. At the conclusion of this work is mentioned the theoretical suggestion for practical exercising of a subject automobile electrotechnics and also a referring is mentioned to my continuation in this dissertation.
|
|
|
Automobile Charging System
Kovačík, Lukáš ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This Bachelor thesis analyzes recharging systems in automobile. It explains main components of electric circuit used in automobile alternators, functions of each part of the alternator, comparison of the most common types of alternators. Main focus is to analyze and inovate the area of power losses, which determines the efficiency of each type. Final part of this thesis describes the analytical calculation of a three-phase generator.
|
|
|
Low power electrical machines
Martinek, Radek ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
The master’s thesis introduces various types of electric motors. Overall, it is divided into 6 chapters, which the first deals with special type of electric motors, namely: permanent magnet DC motor with coreless winding, piezoelectric motor and three phase induction motor with solid rotor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The second part of thesis deals with perspective types of motors, namely: single phase induction motor and reluctance motor. For all of these motors are introduced principles, types, advantages, disadvantages and applications. The third chapter deals with analysis parameters of single phase induction motor. The analysis is performed on a borrowed motor from ATAS company by measurement and verification using simulation program Ansys Maxwell. The fourth part discusses the possibilities of increasing the effectiveness of borrowed electric motor. The following is chapter five, which deals with increasing the efficiency of the motor by changing metal sheets. Results are verified by simulations with Ansys Maxwell and measurements on sample of electric motor. The last part presents electric motor design with new selected electric sheets with lower specific losses, but also with lower magnetic induction.
|
|
|
Analysis and Optimisation Power Parameter of Small Induction Motors
Pařízek, Jiří ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
This thesis deals with the asynchronous engines, describes their structure, principles, properties, use, and briefly describes the design of three-phase asynchronous motor. The first section describes the most common three-phase induction motor, the emergence of the rotating magnetic field and the basic relationships. The second part deals with asynchronous motors for specific applications, their design and features. The next section is an analysis engine borrowed from the electric company ATAS Náchod, and The last section lists ways to improve the basic parameters of induction motors designed and optimized engine.
|
|
|
Engine Motormanagement Software
Kuda, Roman ; Kuchyňková, Hana (referee) ; Hájek, Vítězslav (advisor)
Increasing requirements and claims on running of motor vehicles contributed to development of new systems on the mixture preparations of fuel and ignition. Cardinal causes, which led to the very intensive research and later introduction of superior systems of injection and ignition, where fulfilment of stricter emission limits, lower fuel consumption at prezent engine-power increase and engine torque. The conception of the classical gas-engine was not changed over the past few years. The supervising elements as ignition and injestions of engines are continuously changed.
|
|
|
Automatic measuring with LabVIEW
Paszek, Michal ; Hájek, Vítězslav (referee) ; Huzlík, Rostislav (advisor)
The thesis will introduce a program Labview, a measurement of DC motor separately excited, a design of an automated workplace and a description of its control software. The first section will describe a virtual laboratory. The second chapter will describe the LabVIEW program, each program window and a creation of a virtual instrument. The third part will deal with measurings of characteristics of the DC motor separately excited where the usage and function of motors, load test and a load test will be described. The fourth chapter will introduce the design of the automated measuring workplace and its machine descriptions including their individual characteristics and parameters. The fifth section will deal with functions of the control software describing not only block diagrams but also front panels of the virtual instrument for setting, measuring, storing and controlling blocks. The sixth chapter will depict a chart and waveforms created by the measurement of the DC motor separately excited. Finally, an evaluation of their values and waveforms will be performed.
|
|
|
Simulation of small single-phase transformer
Nevřivý, Tomáš ; Hájek, Vítězslav (referee) ; Vítek, Ondřej (advisor)
This bachelor‘s thesis deals with the complex design of single-phase transformer for low power transfer. The basis of the work is procedure of design referred to standardized tables together with the analytical calculation of all transformer parameters. The calculated parameters are verified using by finite element method in the environment of the program FEMM. Analytical calculation is verified by simulation in stationary and quasistationary magnetic field. The conclusion of the work is supplemented by measurement of the transformer, which according to the calculated parameters was made by company of ELEKTROKOV, Inc.
|
|
| |
|
|
Special low-power induction motors.
Belica, Andrej ; Mach, Martin (referee) ; Hájek, Vítězslav (advisor)
Master thesis deals with design and construction of the most widely used engines currently. Overall, it is divided into five chapters, the first chapter deals with constructional features of various three-phase asynchronous motors, the second chapter briefly paid attention to single-phase motors. The next chapter focuses on the specific engine types, which differ from standard induction motors in its design implementation. This is an engine with full rotor, hysteresis, linear and with shaded field. Although asynchronous motors are considered the most reliable machines work in imperfect conditions, it leads to frequent breakdowns. This is covered in chapter four. Based on the findings from previous chapters the fifth chapter includes a preliminary draft of the asynchronous motor with a full rotor. The last chapter is devoted to the measurement on functional models.
|
|
|
Vehicle Navigation Systems
Beran, Pavel ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
This bachelor´s thesis denote about satellite navigation and mobile phones navigation. We can found the basic explanation of both technologies and their fundamentals of function here. The second part of thesis contains own measurement complete with navigations. In the final part we can found proposals of measurement for learning of a car technique.
|
guest ::
RSS feed.