|
|
Tenis Hall
Hanáčík, Jan ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
This thesis describes design and assessment of the structure of tennis hall of a rectangular floor plan. The building is located in the city of Brno. The project is developed on two variants. The first option is a steel structure with lattice girders. The second option is a wooden construction with glued lamellar girders. The thesis is processed according to ČSN EN standards.
|
|
|
Garage with Fuel Station
Borkesz, Michael ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
Bachelor thesis presents the structural design of a load bearing steel structure of garage with roof construction of adjoining fuel station. The object is located in periphery area of Uherske Hradiste city, near Jarosov district. The ground plan dimensions are: 36 x 32 meters garage hall; 20 x 20 meters fuel station roofing. Heights of both construction tops are same – 10 meters above the surface. As the main material supporting elements was designed steel S355. The main supporting structure compose of trusses, which are hinged supported by columns. The roof deck is heat insulated, supported by purlins. The wall deck is simillar to roof deck, except of the front wall, which is partly composed of glass casing. At the both sides of garage hall are designed gates for vehicles. The roof deck of fuel station roof construction composes from one single trapezoidal sheet, also supported by purlins. The work contains structural design of individual elements, including mutual joints and anchoring. Calculations are performed according to standards of EN.
|
|
|
Steel Load-bearing Structure of administrative building
Kašíková, Anna ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
The thesis deals with the design of the load-bearing structure of an office building in Olomouc. The ground plan dimensions of the hall are 36 × 36 m, the height of the main nave is 17 m (4 GF), side 10. 7 m (3 GF). The spatial beam structure is formed by symmetrical transverse frame links in one direction, in the other direction by horizontal hinged elements. The roof structure is made of truss girders pin-supported on pillars at the main nave, and a flat roof beside the nave. The pillars are placed on the joints and spatial rigidity of the structure provides system of space bracings. The main material is S275.
|
|
|
Shopping gallery
Gargulák, Martin ; Barnat, Jan (referee) ; Pilgr, Milan (advisor)
The objective of the diploma thesis is a design and a check of load-carrying steel structure of a shopping gallery. The project is designed in two options. The building is located in Vsetin. The total ground plan‘s dimensions are 51x54 metres. The height of the building in the highest point is 17 metres.The whole building is divided into two parts - entrance hall and free-storey building. For selected option the calculation of joints and column anchorage is performed as well as the design documentation.
|
|
|
Exhibition Gallery
Bednářová, Bronislava ; Barnat, Jan (referee) ; Bajer, Miroslav (advisor)
This master´s thesis is deal with design of steel structure of exhibition gallery. Layout od building is three-arm star, where each arm is rectangular with dimensions 6 x 18 m and arm has two floors. All three arms are connected to the hexagonal prism (space frame), which is on the second floor walkway and covered skylight. Maximum building height is 11.28 meters from the finished grade. The main structure of building is created by twelve frame in cross direction. The roof is flat. The surface of facade is glass created by aluminium structure.
|
|
|
Assembly hall
Beran, Miroslav ; Pilgr, Milan (referee) ; Barnat, Jan (advisor)
The diploma thesis deals with the design and assessment of the steel supporting structure of the production hall. The transverse dimension of the hall is 21,00 m, the longitudinal dimension is 70,00 m, the height of the hall is 17,56 m. S355 steel is used as the main supporting material. The supporting part of the hall consists of columns on which is placed a truss and two crane tracks at two height levels. Three different types of purlins and pillars are considered in the design of the steel structure. For the selected variant, a static calculation of the main bearing elements, including selected details, is drawn up and drawings are drawn up.
|
|
|
Hangar for small planes
Surovec, Daniel ; Barnat, Jan (referee) ; Štrba, Michal (advisor)
The goal of this bachelor’s thesis is the design of steel loadbearing structure of the hangar for small planes, situated at the locality of the Brno airport. As the basic material was chosen steel S355. The plan of the object is rectangular with the dimensions 42,0 m x 36,0 m and the height of the building in the middle of its span is 13,9 m. The supporting structure of the roof is formed by a system of truss girder. The distance between each crosslink is 4 m. The spatial ridigity is provided by transverse and longitudinal stiffeners. Computational model was created by using the software Dlubal RFEM 5.06. The structure is designed according to standards ČSN EN.
|
|
|
Lumber mill
Beran, Miroslav ; Šmak, Milan (referee) ; Barnat, Jan (advisor)
The aim of The Bachelor’s thesis is design and assessment of steel structure lumber mill. The building has rectangular shape with dimensions of 24 x 9 m, highest point is 5 m. The main supporting structure consist of three-hinged truss girder in axial distance of 4 m. The individual frames are connected by purlins and girts and spatial rigidity of the structure provides system of longitudinal and sway bracings. The entire building is assessed as a closed hall, a hall with open barndoor on one gable wall and as roof with only longitudinal wall for continuous working.
|
|
|
Antenna for telecommunications equipment on a building in Brno
Alánová, Anna ; Barnat, Jan (referee) ; Šmak, Milan (advisor)
The subject of this thesis is the design of antenna mast variants on an existing building in Brno. Firstly, a professional inspection was carried out at the primary school to measure the roof and evaluate the overall condition of the structure. From the measured data, a model of the entire roof was developed in Autodesk Inventor and documentation of the actual condition was prepared. Based on this documentation, the design of the steel antenna mast was developed in two variants - a tubular mast and a truss mast composed of circular bars. The anchoring of the entire structure with the antenna mast is by threading into the bearing walls and further fixing into the rafters and collar tie. Both variants were modelled in AxisVM, the design of the connections of the tubular mast was carried out in IDEA StatiCa, the design of the connections of the truss mast was determined by manual calculation. Both of these variants were modelled in Autodesk Inventor and the drawing documentation, and an accurate statement of materials were produced from this. The roof was scaled down to the central section only for structural design purposes. The roof was first assessed in AxisVM separately and then with the effects of the structure loads from the antenna technology including the proposed roof strengthening. The assessment of the carpentry joints was determined by manual calculation.
|
|
|
Multifuntional Sport Hall
Škatula, Václav ; Pilgr,, Milan (referee) ; Barnat, Jan (advisor)
The bachelor thesis presents a project of a load bearing structure of a multifunction hall that has a rectangular ground plan and also deals with the assessment of the project. The object is situated in the urban area of Ostrava. The task provides two versions of design. The first version consists of ten traverse joining beams witch are distanced five meters from each other. The second version consists of six traverse joining beams witch are distanced nine meters from each other. The thesis focuses on the load pressure of the steel construction, the main emphasis being placed on the single structural components and assembling components. The calculation meet the standards of ČSN EN.
|
guest ::
