|
|
THERMAL AND MECHANICAL PROPERTIES OF TUNGSTEN COMPACTS PREPARED BY SPS
Nevrlá, Barbara ; Vilémová, Monika ; Matějíček, Jiří
Tungsten is a promising candidate material for use in the tokamak device aimed at future production of nuclear fusion power. Here, tungsten is intended for the application in the part called first wall,with the function of a heat-resistant plasma facing armor.In the present work,two fractions of tungsten powder (2 and 4 μm) were used to prepare two consolidated samples by spark plasma sintering (SPS),using a combination of pressure,temperature and electric power.This sintering technique produces samples of near theoretical density which is positive for the application.Tungsten compacts were then studied to determine some basic thermal and mechanical properties, namely thermal conductivity using the laser-flash method and hardness by Vickers test.The measurements were focused on thermal conductivity of the compacts because high thermal conductivity is crucial for the material of tokamak first wall,loaded by high heat flux from the plasma.High hardness is desirable for good resistance
|
|
|
FITTING OF ELASTIC MODULUS ON THE INTERFACE BETWEEN TWO MATERIALS
Kocmanová, Lenka ; Materna, A. ; Haušild, P. ; Matějíček, Jiří
The paper is aimed to determinate of Young modulus near a sharp interface. The 3D elastic numeric model was used for prediction of the Young modulus. The simulated specimen was composed of tungsten and steel. The interface was plane which a normal vector was perpendicular to the indentation force. The indenter geometry for which numerical solutions were accomplished was a rounded cone indenter. An indentation depth is studied as function of a distance indenter-interface. The distance was normalized by depth of indentation. All values of Young modulus lay on one curve after distance normalization due to elasticity. The curve was fitted by inverse beta function. The curve determine the size of area of one material influenced by a second material.
|
|
| |
|
|
Tungsten coatings and free standing parts
Brožek, Vlastimil ; Ctibor, Pavel ; Matějíček, Jiří ; Mušálek, Radek ; Weiss, Z.
Tungsten powders, 20 – 100 µm in size, were melted in the jet of thermal plasma generated by a water-stabilized spray system WSP®. The molten tungsten was deposited on steel and graphite or boron nitride substrates, whereas the spray-ability itself was tested as well as cohesion with other substrates. One of the goals of this experimentation was to gain skills for covering variously shaped walls of nuclear fusion devices (Tokamaks). Also spraying of free-standing tungsten bodies was realized, by means of substrates easily machainable-out after deposition, as graphite and BN. Other option consists of covering a tungsten mesh or plates armored with tungsten wires. Protection of tungsten against oxidation in the plasma jet was a problem to be solved – the best results were gained with shroud gas, Ar with 7% hydrogen, and simultaneous placement of the substrates into graphite cells. The whole spray process was maintained to avoid temperatures over 700°C at which the oxidation is
|
guest ::
