Národní úložiště šedé literatury Nalezeno 24 záznamů.  1 - 10dalšíkonec  přejít na záznam: Hledání trvalo 0.03 vteřin. 
Příprava a strukturní stabilita nanokrystalických tepelných bariér
Jech, David ; Ctibor, Pavel (oponent) ; Ziegelheim, Jindřich (oponent) ; Švejcar, Jiří (vedoucí práce)
Komplexní systémy tepelných bariér patří v současnosti mezi nejúčinnější povrchové úpravy nacházející praktické uplatnění v pozemních energetických turbínách a proudových leteckých motorech. V případě nejexponovanějších rotorových a statorových vysokoteplotních částí leteckých motorů tak bylo v kombinaci tepelné bariéry se systémem vnitřního chlazení dosaženo zvýšení provozní teploty o několik desítek stupňů celsia. V případě konvenčních tepelných bariér sestávajících ze svrchního povlaku na bázi ZrO2-Y2O3 a vazebného povlaku na bázi MCrAlY, pracujících na hranici materiálových limitů, je však velice obtížné dosáhnout dalšího zvýšení provozních teplot, byť jen o několik jednotek stupňů celsia. Pracovní teplota ve spalovací komoře leteckého motoru je úměrná jeho efektivitě a nepřímo úměrná celkové spotřebě paliva a produkci nežádoucích emisí CO2. Z tohoto důvodu je stále vynakládáno značné úsilí ve výzkumu a vývoji nových typů keramických povlaků, které jsou schopné dlouhodobě pracovat za extrémních podmínek. Napomáhají tak tomu i například nové přístupy návrhu vícevrstvých kompozitních systémů tepelných bariér, které umožňují obstát v požadovaném trendu růstu pracovních teplot leteckých motorů, a to zejména díky možnosti optimalizace vysokoteplotní odolnosti a vysoké životnosti. Jejich základnímu přehledu, vlastnostem, technologiím přípravy a způsobům testování je věnována teoretická část disertační práce. Experimentální část disertační práce je věnována optimalizaci přípravy konvenční ZrO2-Y2O3 / MCrAlY tepelné bariéry pomocí atmosférického plazmatického nástřiku a současně vývojem, přípravou a charakterizací nového vícevrstvého experimentálního kompozitního systému tepelné bariéry na bázi ZrO2-Y2O3-Al2O3-SiO2 / ZrO2-Y2O3 / MCrAlY, která v mikrostruktuře obsahuje oblasti amorfní a/nebo nanokrystalické. Strukturní stabilita, fázové transformace a růst tepelně indukovaného oxidu v konvenční i experimentální tepelné bariéře byl po optimalizaci parametrů depozice hodnocen testy vysokoteplotní izotermické oxidace a vysokoteplotní cyklické oxidace a na spalovacím testu. Konvenční i experimentální systémy tepelných bariér byly hodnoceny s využitím metod světelné mikroskopie, rastrovací elektronové mikroskopie s energiově disperzní mikroanalýzou a pomocí rentgenové difrakce. Nově navržený experimentální vícevrstvý systém tepelné bariéry prokázal, v porovnání s konvenční tepelnou bariérou, nižší hodnotu tepelné vodivosti, pomalejší kinetiku růstu tepelně indukovaného oxidu, vyšší strukturní stabilitu a celkově v rámci všech provedených vysokoteplotních testů vyšší životnost.
Suspension plasma spraying of sub-stoichiometric titania by hybrid water/argon stabilized plasma torch
Mušálek, Radek ; Ctibor, Pavel ; Medřický, Jan ; Tesař, Tomáš ; Kotlan, Jiří ; Lukáč, František
In this study, suspension plasma spraying of sub-stoichiometric titania was attempted using hybrid water/argon stabilized plasma torch (WSP-H). Porous coatings with fine cauliflower-like columnar microstructure were successfully deposited in two separate experiments with different power levels of the plasma torch. In both cases, high solid-load content (40 wt. %) of the water-based suspension resulted in considerable coating thickness increase per deposition cycle. Coating annealing and partial remelting of the surface asperities were also achieved by additional pass of plasma torch in front of the coating surface. According to X-ray diffraction, all coatings consisted dominantly of rutile phase. Detailed microscopic observation of the as-sprayed and annealed deposits showed that the local coloration of the coating (ranging from dark blue to beige) was driven by the local overheating of the rough coating surface which could also promote the oxygen intake. Moreover, sample annealing was also observed to increase the sample reflectivity as observed by UV-VIS-NIR scanning spectrophotometry
Mechanical properties of plasma sprayed layers of NiAl10 and NiAl40 on AZ91 alloy
Kubatík, Tomáš František ; Brodil, R. ; Ctibor, Pavel ; Průša, F. ; Brožek, Vlastimil
In this work, plasma coatings of NiAl10 and NiAl40 on magnesium alloy AZ91 substrate were prepared by the hybrid plasma spraying system WSP®-H 500. The both plasma sprayed coatings of NiAl10 and NiAl40 have metallurgical bond. The thicknesses of microstructures in the cross-section of NiAl10 and NiAl40 plasma sprayed coatings prepared by 9 passes were 374 and 440 μm respectively. Adhesion test of plasma sprayed layers was performed using a modified ASTM C 633 standard. The tensile adhesion strength values are 24.7 MPa for NiAl10 coatings and 12.3 MPa for NiAl40 coatings. Abrasion resistance according to Slurry Abrasion Response (SAR) test of NiAl40 layers had similar values (0.12 g/cm2)in a comparison with the uncoated AZ91 (0.126 g/cm2). Layers NiAl10 had greater weight losses (0.175 g/cm2) than uncoated AZ91. Microhardness of plasma coating of NiAl40 is several times greater than microhardnesses of plasma coating of NiAl10 and uncoated substrate AZ91
Tungsten coatings and free standing parts
Brožek, Vlastimil ; Ctibor, Pavel ; Matějíček, Jiří ; Mušálek, Radek ; Weiss, Z.
Tungsten powders, 20 – 100 µm in size, were melted in the jet of thermal plasma generated by a water-stabilized spray system WSP®. The molten tungsten was deposited on steel and graphite or boron nitride substrates, whereas the spray-ability itself was tested as well as cohesion with other substrates. One of the goals of this experimentation was to gain skills for covering variously shaped walls of nuclear fusion devices (Tokamaks). Also spraying of free-standing tungsten bodies was realized, by means of substrates easily machainable-out after deposition, as graphite and BN. Other option consists of covering a tungsten mesh or plates armored with tungsten wires. Protection of tungsten against oxidation in the plasma jet was a problem to be solved – the best results were gained with shroud gas, Ar with 7% hydrogen, and simultaneous placement of the substrates into graphite cells. The whole spray process was maintained to avoid temperatures over 700°C at which the oxidation is
Ceramo-metallic materials of the Ti-B-C and Ti-B-N systems
Brožek, V. ; Doležal, J. ; Novák, M. ; Ctibor, Pavel ; Kolman, Blahoslav Jan
Products prepared by the sintering of titanium and boron carbide powder and by the sintering of titanium and boron nitride powder were studied. The sintering was performed at 2,000 °C under the pressure of 6 GPa in a high-pressure apparatus of BELT-type with sufficient holding time to reach thermodynamic equilibrium. The results of chemical and phase composition analyses were compared with thermodynamic prediction of possible reactions in the system. We proved the preferential formation of borides TiB and TiB2 prior to the carbides or nitrides formation. The products, which may be considered Ti-(TiB,TiB2)-TiN or Ti-(TiB,TiB2)-TiC cermets, were analysed in order to determine their microstructure, phase and chemical composition and their influence on mechanical properties such as hardness or elastic modulus. This work precedes similar study which will be performed using the same powders processed by plasma spraying, which enables to stabilize high-temperature phases by rapid cooling.
Microstructure and performance of titanium oxide coatings sprayed by oxygen-acetylene flame
Ctibor, Pavel ; Štengl, Václav ; Zahálka, F. ; Murafa, Nataliya
TiO2 nano-powders were agglomerated by a spray drying process for applying to thermal spraying. A conventional oxygen-acetylene flame torch was used to deposit porous partially nanostructured TiO2 coatings. Steel substrates were used as a support for tested samples. Scanning Electron Microscopy, X-ray microanalysis and X-ray diffraction were performed to study the morphology and the crystalline phases of the titania coatings. Optical bandgap and kinetics of the acetone decomposition was studied too. The best results were obtained for the powder which is available as a commercial spray feedstock. This powder seems to be most resistant against the reducing atmosphere in the jet of combustive gasses.
Wolframové cermety s karbidem zirkonia a hafnia
Brožek, Vlastimil ; Ctibor, Pavel ; Matušek, M. ; Sedláček, J.
Cermety s wolframovou matricí a funkčními složkami ZrC a HfC s absolutně nejvyššími body tání představují materiál s extrémně vysokými užitnými vlastnostmi za vysokých teplot. Wolframové cermety s obsahem 10, 20 a 30 % funkční složky byly připraveny dvěma rozdílnými postupy a porovnány jejich vlastnosti. První serie byla připravena postupem práškové metalurgie. Zhomogenizovaná a předlisovaná směs prášků byla slinována při teplotě 2000°C a tlaku 6 GPa v aparatuře typu BELT. Druhá serie byla připravena metodou plasma spraying dvěma odlišnými postupy. V prvním případě byly do proudu vodou stabilizovaného plazmatu, produkovaného generátorem WSP®, vnášeny samostatnými podavači prášky W a ZrC nebo W a HfC. Vzdálenost podavačů od výstupní trysky plazmatu od 25 do 75 mm byla ovlivněna rozdílnými kinetickými parametry prášků s rozdílnou granulometrií a hustotou. Druhý postup spočíval v depozici sferoidizovaných práškových směsí, připravených metodou spray-drying s obsahem 5%pojiva
Microscopic and structural characterization of high velocity oxygen-flue and atmospheric plasma sprayed coatings
Murafa, Nataliya ; Štengl, Václav ; Ctibor, Pavel ; Houšková, Vendula
TiO2 nano-powders were agglomerated by a spray drying process for applying to thermal spraying High Velocity Oxygen-Fuel (HVOF) and Atmospheric Plasma Spraying (APS) were used to deposit porous partially nanostructured TiO2 coatings Steel substrate was used for a coatings spraying Scanning Electron Microscopy (SEM), and X-Ray diffraction were performed to study the morphology and the crystalline phases of the titania coatings
Plazmochemická syntéza boridů, karbidů a nitridů přechodných kovů
Brožek, Vlastimil ; Ctibor, Pavel
Pro technickou praxi jsou zatím nejdůležitější boridy titanu a zirkonia, karbidy boru, vápníku, křemíku, titanu, zirkonia, hafnia, hliníku a chromu a nitridy boru, křemíku a titanu. Kromě karbidu wolframu se v celé ČR ani jedna z výšeuvedených sloučenin již nevyrábí, přestože podmínky, zázemí i starší know-how zde ještě jsou. Příspěvek popisuje možnosti plazmochemické syntézy těchto sloučenin, včetně způsobů jejich zpracování na povrchové funkční vrstvy nebo tenkostěnné tvarované součásti.
Cermety z karbidu hafnia
Brožek, Vlastimil ; Ctibor, Pavel ; Dong-Ik, Ch. ; Eun-Pyo, K.
Cermety karbidu hafnia ve wolframové matrici byly připraveny jednak metodou hot pressing při teplotě 2000°C a tlaku 5,5 GPa a dále metodou plasma spraying pomocí generátoru vodou stabilizovaného plazmatu WSP. Byly změřeny a porovnány hodnoty mikrotvrdosti, modulu pružnosti a koeficienty teplotní roztažnosti vzorků s obsahem 10 % HfC.

Národní úložiště šedé literatury : Nalezeno 24 záznamů.   1 - 10dalšíkonec  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.