|
|
Construction and shearing tool production
Šincl, Josef ; Žák, Ladislav (referee) ; Štroner, Marek (advisor)
The bachelor work describes construction and production of the progressive tools, which is used for production of lugs for car Škoda Octavia combi. The lugs are made from material number 1.0396. There were elaborated research from the field of shearing and bending. These technologies were used for production of desired part. In the instrument are made both left and right parts, which are mirror. There are also solved different difficulties in the construction. The instrument should have life cycle 3 000 000 of produced parts. The instrument is used in the 160 tons eccentric press of brand Dirinler, model CDCS P81. To the eccentric press is connected automatic straightener and dispenser, so that there is not necessity of service. The instrument is given yet and is involved in the full operation.
|
|
|
Design and optimization of tractor front drive axle console
Šincl, Josef ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The master thesis is about design and optimization of tractor front drive axle console. The first part, include the design of the new console geometry with respect of the surrounding area. After that is on the newly designed part performed a strain-stress analysis for three selected operating modes of the tractor, which have been defined based on critical operating situations. In thanks of the results of the individual states, the geometry of the component is adjusted according to meet the fatigue failure limit state. After inclusion of critical site modifications, the console design was subjected to design optimization in the ANSYS Workbench program to reduce the amount of material by 10%. The end of the work, is carried out the evaluation of these places and then the console control calculation.
|
|
|
Design and optimization of tractor front drive axle console
Šincl, Josef ; Prokop, Aleš (referee) ; Řehák, Kamil (advisor)
The master thesis is about design and optimization of tractor front drive axle console. The first part, include the design of the new console geometry with respect of the surrounding area. After that is on the newly designed part performed a strain-stress analysis for three selected operating modes of the tractor, which have been defined based on critical operating situations. In thanks of the results of the individual states, the geometry of the component is adjusted according to meet the fatigue failure limit state. After inclusion of critical site modifications, the console design was subjected to design optimization in the ANSYS Workbench program to reduce the amount of material by 10%. The end of the work, is carried out the evaluation of these places and then the console control calculation.
|
|
|
Construction and shearing tool production
Šincl, Josef ; Žák, Ladislav (referee) ; Štroner, Marek (advisor)
The bachelor work describes construction and production of the progressive tools, which is used for production of lugs for car Škoda Octavia combi. The lugs are made from material number 1.0396. There were elaborated research from the field of shearing and bending. These technologies were used for production of desired part. In the instrument are made both left and right parts, which are mirror. There are also solved different difficulties in the construction. The instrument should have life cycle 3 000 000 of produced parts. The instrument is used in the 160 tons eccentric press of brand Dirinler, model CDCS P81. To the eccentric press is connected automatic straightener and dispenser, so that there is not necessity of service. The instrument is given yet and is involved in the full operation.
|
guest ::
RSS feed.