|
|
Ethernet Interface Module on FITkit Platform
Šoustar, Jiří ; Vašíček, Zdeněk (referee) ; Šimek, Václav (advisor)
This graduation thesis is aimed at design and implementation of embedded systems, network communication and support of the network communication for embedded systems. Furthermore it introduces school platform FITkit and offers a conceptional extension of the network interface for this platform based on Ethernet network standard. Based on that conception I'm trying to find and describe suitable solution for FITkit platform which realizes a network interface as a form of extension module capable of development supporting.
|
|
|
Firmware for Multi-Unit Wireless Sports Timekeeping Device
Gál, David ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
This paper describes the design and subsequent implementation of software for multi-unit wireless sports timekeeping device. Used hardware is based on a different thesis and is composed of a control, the primary unit, and end, secondary, units. Both types are equipped with 16-bit PIC24F microcontrollers and wireless communication is catered by RF modules broadcasting in the 868MHz band. The design is aimed primarily at wireless use of secondary units to measure time and to eliminate measurement errors associated with wireless transmission. It also deals with reducing the consumption of units and the use SD cards to store the measured times. Implementation is done in C.
|
|
| |
|
| |
|
| |
|
|
FITkit VGA Grabber
Lojda, Jakub ; Šimek, Václav (referee) ; Vašíček, Zdeněk (advisor)
This paper discusses the possibilities of realization of VGA grabber for FITkit. Text is focused on software and hardware implementation possibilities. The first part introduces the reader to the theory of the issue. Next, the paper proposes several options of VGA grabber implementation and brief evaluation of alternatives. The second part describes a chosen architecture of VGA grabber of the featured options and includes a brief summary of the findings of the processor LPC4370 from NXP and USB Video Class UVC, on which the resulting architecture is based. The conclusion includes a brief summary.
|
|
|
Configurable Embedded Photo/Video Trap with Storing Data and Self Adaptation to Surroundings
Výborný, Filip ; Šimek, Václav (referee) ; Strnadel, Josef (advisor)
This diploma thesis deals with a design and construction of an embeded camera trap with a video recording and night vision support, which is able to self adapt to surroundings. The device is based on the Raspberry Pi platform and configurable by touch screen control with a user-friendly graphical interface. Also the web-application for easy remote administration was developed in Ruby On Rails framework. The camera trap was built and successfully tested under the real conditions. There are also typical application cases and requirements for camera trap construction described in this thesis.
|
|
|
Universal Onboard Automotive Computer
Novohradský, Petr ; Crha, Adam (referee) ; Šimek, Václav (advisor)
This work includes the complete design of a prototype embedded system for displaying information from a vehicle. ELM327 chip is described and its basic use. Work also describes the development of the diagnostic socket for vehicles in European countries. Also contains a complete description of developing schematic, printed circuit board and firmware implementation. The thesis describes the use of realtime operating system in embedded system.
|
|
|
Optimization of Business Processes
Květoňová, Šárka ; Šimek, Václav (referee) ; Videcká, Zdeňka (advisor)
This Master Thesis deals with the theory of business processes and with the possibilities of their organization and optimization. Each business process describes a flow of documents, finance, pieces of information and tasks from one member of the process to the other. Appropriate structure and coordination of the business processes and understanding of their mutual relations, too, can be seen as same of the most important features of successful modern business. Workflow is a very similar term to business process. Workflow allows its automating and computer processing. On the basis of the thorough business processes analysis of a selected business is the main goal of my work to optimize selected business processes with project management support. In concrete, the project management theory and MS Project 2000 will be used to planning and realization of the intended changes. The minor goal is to propose a partial reengineering of selected business processes by way of ERP system implementation. The new management structure planning of business processes was also proposed and realized by MS Project. The outputs of the MS Project contain partly the total budget of the planned processes reengineering, partly the time sheets with detailed roles and other resources mapping. In conclusion, the total savings are described.
|
|
|
Autonomous generator of test scripts
Horký, Stanislav ; Šimek, Václav (referee) ; Kolouch, Jaromír (advisor)
The subject of this master thesis are state machines and their testing. To this purpose, an application is described, which is able to test these state machines autonomously. Application have two parts, first generator and editor of data is built and second part is testing procedure, which is able to test state machines in question and to give corresponding test report.
|
guest ::
RSS feed.