|
|
Further education of lawyers in specialist professions
Čech, Jaroslav ; Kühn, Zdeněk (advisor) ; Tryzna, Jan (referee)
Further education of lawyers in specialist professions Education isn't finished when we obtain a diploma at high school or university but continues and follows us all, and our professional life. I chose this diploma thesis topic in time when I was working with education specialists on an online learning platform first as a tester and later as part of the team. That platform was developed for needs of further education of teachers. I realized I have not heard much about education of lawyers and tried to examine that topic more. I have first looked at the educational process of Czech lawyers particularly into professions of attorneys, notaries and judges. First analysis was aimed at the primary learning program for young lawyers - trainees. I wanted to see the methods of every profession separately to have a good idea of the concepts in use. After that I have examined the continuing education of lawyers who already passed their bar exams (or other relevant exam). After getting an image of the professional learning programs I started to explore foreign approaches to this topic. Choice for attorneys comparison was Germany and Netherlands and for judges France and Netherlands. In the thesis I was comparing primarily introductory courses for attorneys and judges as all institutions responsible for...
|
|
|
Waste treatment and prevention in the KB-BLOK systém s.r.o
Čech, Jaroslav ; Mikulová, Vlastimila (advisor) ; Pavel, Pavel (referee)
The bachelor thesis is focused on waste prevention in the company KB-BLOK s.r.o. where during the past 10 years by several technical changes in the production process, have been partly to prevent waste and significantly reduce the total volume of some wastes produced. The thesis captured the methods by which it was reached to reduce waste production, as well as statistics on the volume of waste production in the observed years and finally summarize and evaluate the benefits of the changes along with setting goals in other activities of the company.
|
|
|
Steam boiler with grate firing , burning coal or wood biomas 200 t/ h, 9,3 MPa 520°C
Čech, Jaroslav ; Hudeček, Mirko (referee) ; Skála, Zdeněk (advisor)
The aim of the work is the design of a grate boiler of 200 t . h-1 output, which will burn brown coal or wood chips. The work is divided into several parts. First, stoichiometric calculation and the calculations enthalpy of flue gases and air are performed. After calculating the heat balance and loss of the boiler was counted boiler efficiency. The design of individual heating surfaces is proposed and at the end are controlled the overall heat balance of the boiler. The calculation is supplemented by drawings.
|
|
|
Evaluation of statistical quality control (SPC) in solving the stability of processes in die castings
Hejduk, Oldřich ; Morávková, Jitka (referee) ; Čech, Jaroslav (advisor)
The aim of the theoretical part of this thesis is to describe the system of the aluminium casting alloys, with focus on the aluminium castings used for die casting. In this part of the thesis the different methods of the quality management are described. The practical application of these methods is described in the experimental part of this thesis, in which we focus on the evaluation of the statistical quality management and the process stability of the die casting parts of the selector mechanism cover. This part of the thesis also contains suggestion for the QFD method for this cast.
|
|
|
Quality-evaluation tools for Al-alloy die-castings
Rozman, Jiří ; Čech, Jaroslav (advisor)
The goal of this diploma thesis is to on a practical example, with use of the quality system, describe the current state of input casting inspection in Tribotec Ltd. and output casting inspection of casting suppliers in this company and to suggest a new way of output casting inspection on Tribotec Ltd. with higher quality of spoilage rate survey of supplying casting already at the input inspection stage.
|
|
|
Quality-evaluation tools for Al-alloy die-castings
Rozman, Jiří ; Vašíček, Richard (referee) ; Čech, Jaroslav (advisor)
The goal of this diploma thesis is to on a practical example, with use of the quality system, describe the current state of input casting inspection in Tribotec Ltd. and output casting inspection of casting suppliers in this company and to suggest a new way of output casting inspection on Tribotec Ltd. with higher quality of spoilage rate survey of supplying casting already at the input inspection stage.
|
|
|
Evaluation of porosity in Al-alloy die-castings
Havel, Jiří ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The aim of this diploma thesis is to analyse the porosity of die - cast cast that were made of the alloy AISi9u3 in iron-foundry Skoda Car Mlada Boleslav. The analysis and the sample comparisons are based on my own measurements and are also connected with previous diploma thesis which deals with that issue and was drawn up at Technical University in Brno. All measurements were statistically tested.
|
|
|
Evaluation of porosity in Al-alloy die-castings
Straka, Jakub ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The purpose of this diploma thesis is an evaluation of die-castings porosity, eventually the evaluation of seats with local squeeze in connection with their mechanical and structural properties. The swatches of alloy AISi9Cu3 were taken from the engine block made by Škoda Auto Company, Mladá Boleslav. To the evaluation and the comparison of the results there were used value of porosity with own measure and other student´s thesis of Brno University of technology. Sets of mechanical and structural properties were selected, evaluated and tested by statistical programs.
|
|
|
Using simulation to predict defects in and evaluate properties of die-cast Al-alloy castings
Morávková, Jitka ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The purpose of this diploma thesis is comparing the quantity of porosity in die-cast aluminium casting with using simulation. The cast engine blocks were made by high pressure die-casting and a local squeeze casting (LSC) technology. There was also examined the relationship between porosity and mechanical properties of castings. There were evaluated and compared the results of my own measurements with data from previous students theses at the Faculty of Mechanical Engineering BUT. All data were tested by statistical tests. The comparison of simulation results and experimentally measured values was found a good programme-ability to simulate and estimate porosity.
|
|
|
Evaluation of mechanical and structural properties of new block
Lefner, Jiří ; Nová, Iva (referee) ; Čech, Jaroslav (advisor)
The purpose of this dilploma thesis is to evaluate mechanical and structural properties of two types casts of Al-alloy (components of the engine block) which were made by different technologies. Die casting with local squeeze casting and without local squeeze casting. First of them is used in lot manufacture of the current engine block. The aim of the foundry is to change the technology and start to produce new block by the die casting without local squeeze casting. The samples were taken from the both parts (lower and upper part) of the current and the new engine block which are made in foundry of Skoda Auto a.c. in Mladá Boleslav. Sets of mechanical and structural properties were selected, evaluated and tested by statistical programs. It was used fifty casts of the engine blocks for the experiment.
|
guest ::
RSS feed.