|
|
The diagonal pump in turbine regime
Šimunek, Ondřej ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
The thesis is focused on hydraulic design of a semi-axial pump with an axial diffusor with guide vane. The pump is designed with respect to the turbine mode so that it can be used for low-potential energy harvesting or energy storage. The design of the pump is assessed by numerical fluid mechanics using commercial software Ansys CFX.
|
|
|
The Pump with a Diffuser with Stochastic Blades (Runner and Diffuser)
Dobšáková, Lenka ; Melichar, Jan (referee) ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
This doctoral thesis studies the non-uniform blade cascade for centrifugal pumps. Influence of non-uniform blade cascade is investigated on the impeller and diffuser. A non-uniform blading impeller of pumps in this doctoral thesis was examined in terms of influence on efficiency characteristic. The idea of using non-uniform blading is to obtain a flat efficiency characteristic. Then the centrifugal pump could be used on larger scale of power with achieving a sufficiently high efficiency. The work is based on experimental measurements and numerical simulations of non-uniform hydraulic pump components. Non-uniform impeller and the diffuser were newly designed for this research. A new measuring track of small submersible pumps was needed to design and build for measurements. Different pump combinations with conventional hydraulics on one working point and hydraulics with non-uniform were measured. All measurements were evaluated and characteristics of efficiency, head and power were obtained for each measured combination. Some of pump combinations (which were measured in experiment) were numerically simulated by program Ansys Fluent. Data needed to evaluate the characteristic of efficiency and specific energy were collected from each numerical simulation. A theoretical consideration concerns the influence of non-uniform blade cascade applied on diffuser. The suggestion how to decrease hydraulic losses in canals was done. The theoretical consideration how to make a flat efficiency characteristic was made.
|
|
|
The proposal of the diagram of a pump series
Šály, Peter ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
My diploma thesis describes a procedure of creating interactive computer software for company ISH&MSA Čerpadla a.s. in its theoretical part as well as in its practical part. It is a proposal diagram of centrifugal pumps which consists of made and nonmade pumps. After the selection of a certain pump, according to the required parameters of capacity of pump and transit height, the output of the programme is drawing of a flows characteristic, characteristics of coiled paddlewheel and curves of dissipation without any differences in whether the pump is made or not. There is an operating procedure from the initial work with data, short demonstrations from source code, computation of nonmeasured pump to the ascending flows characteristics in practical part of my diploma thesis. In theoretical part, there are explained principles that are needed for comprehension of a pump reform which are used in practical part.
|
|
|
The computation of draft tobe of the turbine for giving parameters
Žák, František ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
This diploma thesis describes design of a new shape of the draft tube for small hydro Katovice with maintaining built dimension. First part of this thesis is devoted to the formulation of the problem, description of basic function of the draft tube, its efficiency and other formulas. In the second part of this thesis the analysis is made for original design supported by CFD calculation. Furthermore a new design of the draft tube is made with comparison of original draft tube.
|
|
|
Torque momentum of the jet deflector
Kaprinay, Zoltán ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
The aim of this master’s thesis is to determine the torque momentum of the jet deflector of the Pelton turbine using a two-phased CFD simulation. The reason for determining the moments is the inaccurate formula according to a standard, whose results are assumed to be too excessive. The first part is devoted to theory of Pelton turbine and its main components. The second part contains the design of deflector, explanation of the used k- turbulence method and the Volume of Fluid two-phased flow modeling method. The results of the simulation are presented at the end of the thesis.
|
|
|
Hydroelastic Response of Hydrofoil Under Cavitation Conditions
Čupr, Pavel ; Koňas, Petr (referee) ; Veselý, Jindřich (referee) ; Rudolf, Pavel (advisor)
Tato disertační práce se zabývá experimentálním a výpočtovým výzkumem přídavných účinků od proudu kapaliny na obtékaný hydraulický profil. Dynamická odezva profilu byla analyzována pro dva typy buzení: buzení odtržením mezní vrstvy a Kármánových vírů a dále buzení pomocí externího budiče připojeného k lopatce. Experimentální měření dynamické odezvy profilu na oba typy buzení bylo provedeno pro lopatku umístěnou v kavitujícím a nekavitujícím proudění. Získané výsledky byly použity pro verifikaci přídavných účinků stanovených s využitím numerického modelování.
|
|
|
The draft tube design for small water power station Doudlevce
Vintr, Martin ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
My thesis is engaged in description of ineligibility original version of the elbow draft tube new constructed small hydro power plant Doudlevce. Other main purpose was construction of better hydraulic thus more efficient this draft tube. First chapter meets project small hydro power plant Doudlevce and it specifies this interesting contstruction of the power plant (for example position of the turbine in vacuum fontain) and many others information about it. Second chapter and its particular parts there deal with functions of this draft tube, for example out-flow of water from turbine and a principle of water-energy utilization placing behind turbine runner. There is also described energy profit and how to get it throught draft tube. There is an analysis of important quantities, which are used during the scoring of flow in the draft tube in third chapter. This part of my thesis is aimed to meeting their principles. There is one of the main purposes of this thesis, where is a description of ineligibility original version of the elbow draft tube in fourth chapter. It results sizable from Kaplan´s attemps and analysis of flowing based on computations in computer programme CFD Fluent. Fifth chapter is about general principles, which should be looked out during the construction of the draft tube. There is also project of new hydraulic better draft tube and its another parts. Last chapter compares original version with new better project based on computations in computer programme CFD Fluent. Comparison is made of specific criterion flowing of water, where are described quantites in third chapter, and efficiency of this draft tube.
|
|
|
The runner for the straight-flow turbine for small hydro power Sobotín
Žižka, Jakub ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
The thesis deals with the problem of optimizing an existing unused turbine for use in a different location than the designed. The goal is to reduce the flow through the turbine by changing the runner geometry while increasing the head, with the least possible decrease in efficiency. The individual modifications of the hydraulic shape are based on the knowledge of the basic relations for the designing of hydrodynamic machines. Numerical fluid mechanics is a tool for validating the effect of individual adjustments. The hydraulic design of the new runner and draft tube of the axial propeller turbine with a fixed guide vanes is performed. Based on the CFD simulation, a universal turbine characteristic with a new hydraulic shape is compiled.
|
|
|
Drive of control ring PVE Merkersbach
Skoupý, Jiří ; Veselý, Jindřich (referee) ; Kašpárek, Jaroslav (advisor)
This thesis is focused on determination of forces acting to regulation ring of water power plant Markersbach (Germany). Solution of the problem is realized for two variants of servomotors – with and without servomotors acting surfaces balancing. Next topics of this thesis are strenght calculation of piston rod and bottom of the servomotors. Minimalization of the size of servomotors plungers by change of regulation kinematics has been done and minimal pressure in the pressure tank is determined. At the conclusion of this thesis received results are mentioned and its interpretation has been done. This thesis is provided for company Litostroj Power, ČKD Blansko Engineering, a.s.
|
|
|
Hydraulic solution of the swirl turbine for locality of Rosenauer mill
Pavlíček, Tomáš ; Veselý, Jindřich (referee) ; Haluza, Miloslav (advisor)
This thesis focuses on the design of a swirl turbine for the site of Rosenauer Mill, where the gross hydraulic head HB is 1 m and the flow rate is Q is 1.6 m3/s. The beginning of the work is dedicated to microturbines and explains why a swirl turbine is suitable for this location. The procedure applied for developing the hydraulically active surfaces of the turbine is then presented. Firstly the design of the blades is based on analytical formulas, which are further refined using the CFX Ansys program. The turbine is closely affected by the inlet and draft tube, therefore their design is also included in this thesis. The hydraulic calculations yield the resulting parameters and characteristics of the designed turbine, calculated from the entire assembly using CFD computations. The final section of the work is devoted to the design of main structural components such as the gear, shaft, and bearings. The hydraulic design developed in this thesis serves as the basis for implementing the swirl turbine and constructing a small hydraulic power plant at the Rosenauer Mill.
|
guest ::
