|
|
Design and analysis of electromagnet
Macek, Pavel ; Skalka, Miroslav (referee) ; Vítek, Ondřej (advisor)
This work deals with a proposal and an analysis of electromagnets. The first chapter is an introduction into solve of the problem. In the second chapter there is a general discussion about basic relations of the electromagnetic field. The third chapter is dedicated to the operation principle and construction of electromagnets and is supplemented with their common classification. The fourth chapter introduces the Finite Element Method and the FEMM programm. The fifth chapter is dedicated to the analysis of the DC electromagnet, the sixth chapter analysis single-phase AC electromagnet. In the seventh chapter there is a review of results of general analysis of both electromagnets.
|
|
|
Temperature measurement on electrical machines
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This work is trying do describe the temperature allocation on the electric machines. In the first part it is describing the temperature measurment, principals of measuring, thermocouples and a contactless measurment. In the second part, it is theoretically proceeding with engine types and a heat generation on them. In the third part, the work is describing simulation in the programs Autodesk Inventor and Ansys Workbench. In the next part, a work is showing the creation of a elektric machine model in already mentioned programs and a practical measurements of temerature allocation in the laboratory. In the conclusion, it is evaluating the measurment achievements and comparing the results of both used metods.
|
|
|
Analysis of the stator and rotor pack termination effect on the synchronous machine by FEM
Michailidis, Petr ; Valenta, Jiří (referee) ; Skalka, Miroslav (advisor)
This thesis deals with simulation’s possibilities of the electromagnetic fields in electrical machines. A finite element method is the final element technique. The content of this thesis is a model and mesh creation and electromagnetic simulation of synchronous machine. The stator and rotor pack termination effect on the synchronous machine.is analyzed by finite element method in ANSYS program. The type of the stator termination pack is described by four segments. The magnetic field distribution is deformed due to the material properties of used segments. In the next part a methodics of mesh creation is shown. The mesh quality (in term of elements number and elements shape) is important due to the solution accuracy and speed.
|
|
|
Mechanical Torque Analysis of Induction Machine Based on Magnetic Circuit Saturation
Skalka, Miroslav ; Bendl,, Jiří (referee) ; Voženílek, Petr (referee) ; Ondrůšek, Čestmír (advisor)
e main goal of this thesis is mechanical torque analysis of induction machine based on magnetic circuit saturation, oversaturated areas classification and the possibility of oversaturated areas reduction of their influence on machine properties. Whole problem is solved by finite element method in ANSYS program. Work is divided into the description and creating of electromagnetic model, a method of the induction machine equivalent circuit parameters determination, the electromagnetic field calculation by finite element method, experimental measurement using LabVIEW program with measurement accessories (PCIe card National Instruments), data processing program in DIAdem, results analysis of calculations in terms of magnetic circuit saturation, the influence of magnetic circuit material based on electromagnetic field distribution and the magnetic flux density along the air gap including spectral analysis using MATLAB and the electromagnetic torque and its parasitic torque components calculation.
|
|
|
Kogenerační jednotka mikro výkonu v RD
Pusztai, Radek ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
Bachelor paper on "Cogenerational unit of micro energy in a single-family house" occupies with analysis of usage and economical effectiveness of cogenerational installation in the single-family house. Results and used material are based on longtime knowledge of leading Czech and world companies and institutions. Paper is structed into two parts.
|
|
|
Temperature measurement on electrical machines
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This work is trying do describe the temperature allocation on the electric machines. In the first part it is describing the temperature measurment, principals of measuring, thermocouples and a contactless measurment. In the second part, it is theoretically proceeding with engine types and a heat generation on them. In the third part, the work is describing simulation in the programs Autodesk Inventor and Ansys Workbench. In the next part, a work is showing the creation of a elektric machine model in already mentioned programs and a practical measurements of temerature allocation in the laboratory. In the conclusion, it is evaluating the measurment achievements and comparing the results of both used metods.
|
|
|
Diagnosis warming selected parts of an electric machine
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Veselka, František (advisor)
This work is describing warming parts of an electric machine. In the first part, it is describing heat and temperature, its origin and radiation. Work is carrying on with the problems of heat origin in electric machines and in selected parts of an it. In the next part, the work is describing measurment and devides it in contact and contactless. The third part is dealing with electric machines and considers commutator motors. Work continues with practical part, which describes measurments on selected electric machine, includes calculations and graphs. After this part, work is dealing with temperature allocation in graphic interface and describes a 3D model production. In the conclusion, it is evaluating the measurment achievements and comparing the results of various used metods.
|
|
|
Analysis of damage to the rotor bars of induction machines
Henzel, Roman ; Michailidis, Petr (referee) ; Skalka, Miroslav (advisor)
This bachelor thesis deals with disorders of induction machines with focus on the failure or damage to the rotor bars or end rings. The work includes a literature research of the low resistance measurement, which can be used to determine the rotor bar resistance of the squirrel cage induction machine. The experimental measurement of the analyzed motor with the following conditions (short-circuit, no-load and load) is also includes. The magnetic model of the machine was described and created in MAXWELL and results were compared with the LabVIEW software (in order to verify the accuracy of the particular simulation). Analysis results evaluation of three phase squirrel cage induction machine with broken rotor bars was done.
|
|
| |
|
|
Analytic represantation of AC winding properties
Kubín, Tomáš ; Skalka, Miroslav (referee) ; Ondrůšek, Čestmír (advisor)
My bachelor thesis deals with the issue of overview diagram of magnetic fields of basic free-phase winding. It is divided into four parts.The first part focuses on basic winding types and types of their connection. The second part describes the issue of analytic calculation of the magnetic field intensity in the air gap of rotating machines. This description is easier and faster than modern method of final elements in some cases because it displays course of particular harmonics and their partial sums for selected magnetic fields. The third part presents Görges diagrams of basic winding types and finally there is a calculation of the winding factor shown on two examples in the fourth part.
|
guest ::
