|
| |
|
|
Risk analysis of the industrial enterprise
Zahálka, Jiří ; Tabas, Marek (referee) ; Kotek, Luboš (advisor)
The aim of the thesis is to create a literature search for risk analysis in industrial company, establish a methodology for risk analysis, identify risks their consequences and probability and to design recommendations for their reduction. This thesis should become useful tool for the company BORCAD cz, Ltd. to identify risks which could have serious impacts to the organization. Thesis maps these threats across the company from the perspective of the jobs, the risk of manufacturing machines and equipment and risks resulting from the use of burning furnace to natural gas.
|
|
|
Casuistry of major accidents in the Czech Republic
Rozlílková, Lada ; Trávníček, Petr (referee) ; Kotek, Luboš (advisor)
This Master’s thesis deals with the topic of major industrial accidentsin the Czech republic. The main objective of why accidents are reported and investigated is to provide information to other companies to learn from these significant events, reduce the risk of such events in the future and prevent damage to human and animal life and health, the enviroment and property.
|
|
|
Using of FMEA method for prevention of errors in the industrial enterprise
Veselý, Milan ; Vintr, Michal (referee) ; Kotek, Luboš (advisor)
The subject of this thesis is using of FMEA method and risk assessment in the production process in Eurokov s.r.o. company. In the theoretical part are discussed the detail different types of FMEA and their applications. The practical part is focused on analyze the situation of poor quality for a specific product from Eurokov s.r.o. company. Data is used for application of FMEA form and to specification of precautionary measures for reduction poor quality in the production process.
|
|
|
Verification of prototype must-be quality by customers
Božek, Alexandr ; Tabas, Marek (referee) ; Kotek, Luboš (advisor)
The basic requirements represent very significant category of customer requirements in relation to the product quality. The customer does not consider these requirements to communicate the manufacturer because they are automatically expected and customer does not think about them until the moment when the product ceases to carry out them (to satisfy). Nevertheless, it is important to pay appropriate attention to these demands already in pre-production phase. After the prototype production it is necessary to verify the fulfilment of these requirements. The aim of the submitted bachelor theses is analyse the current state in this area and create the procedure for verifying the quality of product prototype by customers, identify customer´s requirements, and finally apply suggested procedure to the specific product.
|
|
|
Improvement of quality management system
Číšecký, Jakub ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with the optimization of the production process, namely the assembly of the machine tool. It contains a detailed description of the assembly process and its integration throughout the standard business case. The PERT method is used as the main optimization tool, complemented by a Gantt diagram. The aim is to design a process for more efficient production planning.
|
|
|
Identification and assessment of errors in the assembly line of the pneumatic valves
Kadilák, Tomáš ; Mukhametzianova, Leisan (referee) ; Kotek, Luboš (advisor)
This thesis is focused on identification and evaluation of errors during pneumatic valve assembly. Theoretical part describes tools used: quality gate, flow chart, Pareto diagram and FMEA analysis. Within practical part the current assembly process is analyzed with current errors and besides evaluation, the improvement priorities and ways to accomplish these improvements in an actual company are defined. If the company chooses to take the opportunity to implement these improvements, thesis also monitors the results and reaction to the change of the analyzed process to a certain point.
|
|
|
Production KAIZEN Application
Novák, Jaroslav ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
Theoretical part of this diploma thesis describe Kaizen method and parts of this method, which was developed in Japan after the Second World War. One part of this method is the 3MU concept, that includes definition of absences which influence all companies. One concept of the 3MU is “Muda”, who indicate waste. Practical part is interesting in wastes in sphere of productivity at one of the production department of the Bosch Diesel Ltd. in Jihlava. Individual operations of this department are considered in light of possibility introduction of more-machine operation and the checking of necessity of some machines. As a result is time data evaluation by REFA method and check of possibility introduction of more-machine operation with modification of working processes, calculation of industrial production capacity of some machines and the definition of buffer stocks. This modification of working processes, number of machines and the definition of buffer stocks needs change of layout of production department. At the conclusion there are calculated final costs and savings for implementation of this project.
|
|
|
Ergonomic audit at university
Kazarian, Anna ; Mukhametzianova, Leisan (referee) ; Kotek, Luboš (advisor)
This thesis deals with ergonomic audit of the workspace and working conditions of a university. First, factors affecting students and researchers are analyzed, with focus on their effects on physical and mental health. Attention is mainly given to the effects of thermal and moisture parameter of air, carbon dioxide concentration, lighting and classroom and office equipment. Level of adaptation of the workspace to the needs of disabled students and faculty is also considered. In the practical part of the thesis, the proposed audit is carried out at the Faculty of Mechanical Engineering of the Brno University of Technology. Measurements of ergonomic parameters were performed in selected rooms. Based on their results, shortcomings were identified and corrective measures were proposed.
|
|
|
Purchase process standardization
Skácel, Jakub ; Kotek, Luboš (referee) ; Kotek, Luboš (referee) ; Fiala, Alois (advisor)
This master's thesis is engaged in standardization of relation between costumer and supplier from perspective of purchasing products in the automotive industry. In this thesis are specified requirements at the suppliers of plastic parts. The costumer is Robert Bosch České Budějovice (RBCB). By standardization we understand selection and description of customer’s requirements at supplier.
|
guest ::
