National Repository of Grey Literature 127 records found  beginprevious118 - 127  jump to record: Search took 0.01 seconds. 
Shear stress relaxation of bituminous binders in DSR
Musil, Vladimír ; Hegr, Zdeněk (referee) ; Dašek, Ondřej (advisor)
The thesis describes the relaxation properties of bituminous binders determined in dynamic shear rheometer (DSR). Paving bitumen, polymer modified bitumen (PMB) and crumb rubber modified bitumen (CRmB) were chosen for comparison. In order to describe the effects of ageing on asphalt binders relaxation properties, the laboratory simulation of ageing using RTFOT and 3xRTFOT method was performed. For each binder were simultaneously conducted tests of needle penetration, softening point and elastic recovery. Selected bitumens were used for the production of asphalt mixtures. The low-temperature properties tests (TSRST) were performed for these mixtures, when the results were compared to the relaxation properties of binders determined in the DSR.
The influence of test specimens preparation and instaling of grid on low temperature characteristics of bituminous mixture
Sklenář, Jan ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
This thesis was focused on studying of asphalt mixture behaviour with Crumb Rubber modified Bitumen at low temperatures. The work is divided into practical and theoretical part. The practical part is focused on manufacturing of test specimens and using of thermal stress restrained specimen test according to ČSN EN 12697-46. The literature review, description of the specimens manufacturing process and analysis of the measured values are introduced in the theoretical part of the work. Three kinds of test specimens were manufactured from one asphalt mixture.
The comparison of needle penetration and cone penetration test of asfalt rubbers
Sychra, Martin ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The laboratory properties of crumb rubber modified bitumens (dynamic viscosity, needle penetration, cone penetration, softening point, resilience and elastic recovery) are determined in bachelor’s thesis. The relationship between these properties is described.
The influence of crumb rubber content on low temperature characteristics of bituminous mixtures
Doležel, Václav ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The aim of this bachelor’s thesis is the design of asphalt concrete for very thin layers with crumb rubber modified bitumen and the perform of low temperature characteristics tests according to ČSN EN 12697-46 standard.
Low noise pavement surfaces
Zítka, Patrik ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
This bachelor´s thesis focuses on the use of low-noise road surfaces, due to a constant increase of traffic noise nowadays. Within this work different types of roadways are analyzed and their advantages and disadvantages are shown. Additionally, the basic measuring methods of the traffic noise are described and summarized. Finally the procedures and results of the measurements on noise emissions on low-noise surface VIAPHONE® are discussed.
Design of asphalt mixtures and testing of their resistance against permanent deformation
Dlouhý, Petr ; Dašek, Ondřej (referee) ; Varaus, Michal (advisor)
The thesis deals with the testing of raw materials for the asphalt intermixtures development, where the tests of aggregates and asphalt binders were performed. Consequently two asphalt mixtures, Czech mixture ACO 11 and German mixture AC 11 DS, were developed. The mixtures were further on tested for resistance against permanent malformation. Accomplished results were reciprocally compared.
Properties of binders suitable for hot applied sealants and bituminous membranes
Musil, Vladimír ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The work describes the basic laboratory characteristics of selected asphalt binders that could be suitable for hot applied sealants and bituminous membranes. Paving grade bitumen, polymer modified bitumen, asfalt-rubber and polymer modified bitumen with crumb rubber addition were used. Properties of binders were compared using tests of dynamic viscosity, needle penetration, cone penetration, softening point, resilience and elastic recovery.
Design and evaluation of asphalt rubber mixture
Hotař, Petr ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The aim of bachelor thesis is to design the asphalt concrete for very thin layers using asphalt rubber and to perform laboratory tests according to ČSN EN 13108-2 and TP 148. The work is based on the literature review and respects properties of asphalt rubber. The expected properties of asphalt concretes for very thin layers are summarized and evaluated.
Analysis of the laboratory test "Crack propagation by semi-circular bending"
Petříček, Václav ; Dašek, Ondřej (referee) ; Varaus, Michal (advisor)
The objective of this bachelor thesis is to realize the basic laboratory tests of aggregate and asphalt binder, thereafter, to desing the Czech asphalt mixture ACO 11+ and the German asphalt mixture AC 11 DS and to compare them after testing for the resistence againts crack propagation.
Design of asphalt mixtures with the orientation on the water sensitivity
Kalfeřt, Martin ; Dašek, Ondřej (referee) ; Varaus, Michal (advisor)
In these thesis aggregate and bitumen for the design of asphalt mixtures were described and tested. Further the asphalt mixture was tested with various tests and with the test for the water sensitivity.

National Repository of Grey Literature : 127 records found   beginprevious118 - 127  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.