|
|
UML modeling
KREUZMAN, Michal
Bachelor thesis deals with modular (extensible) software aplication which serves mainly as aid tool for teaching mathematics, physics and chemistry through threedimensional animated scenes with usage of stereoscopic projection. Software design is created in modeling language UML, CD with C# source codes and models is included with work. Contribution of work is well documented design and source codes of software program (under open source licence) which is extensible. Other concerned people can join and work on this project. In theoretical part is essential basic of UML that I've used over designing the model. Following by practice part where I focus on modeling.
|
|
|
Make a design of 5 km long cycling road between Folmava a Hrošovský Týn
ŠLEISOVÁ, Martina
The aim of this thesis was to project two versions of a five-kilometer-long cycle road between Folmava and Horšovský Týn. These roads have been delimited between the village Dolní Folmava and the holiday resort Babylon. The version 1 has been selected for a detailed elaboration. The cycle road has been projected along the existing field and forest lanes and tertiary roads in order to avoid aimless cutting down of trees and large construction works. In this project, I have mainly drawn on the technical conditions TP 179 {--} Projecting Communications for Cyclists and Other Relative Instructions. In the course and height solutions I have proceeded so as to make the route overlap as much as possible the course of the existing communications. I have left the width layout untouched; however, I have revised the construction layout because of the security and fluidity of cycling. In order to prepare an adecuate coverage, the company LesoPol´s technology with the usage of the blend Glorit has been selected for possessing a wide range of advantages in comparison with current technologies. On the basis of these facts, I have elaborated the project documentation for the declaration of ground communication construction. Picnick and stop points were suggestes along the route as well as traffic signs and possible connections to an existing cycle and foot paths. Moreover, current cycle traffic situation was analysed, including mapping of the targets and resources of the cycle traffic in the region. I have also evaluated the utility of individual technical objects {--} such as culverts and bridges {--} and have pointed out to the need of restoration of some. I have drawn on the national and regional cycling tourism conceptions while elaborating this thesis.
|
|
|
Design of the database for forwarding agency
Kolařík, Vít ; Palovská, Helena (advisor) ; Strossa, Petr (referee)
The goal of this bachelor thesis was to create a design of a database for aplication of a transport company, that would be able to file orders and to control own trucks. I was progressing from creating an analysis and conceptual and physical model of the database to testing the database by simple commands in Oracle 10g Express Edition. Beside the design, I was also concerned in access of the users into the database. The presumed benefit should be the fact, that the customer would have the possibility to trace the order. An employee should be more effective in planning of the transports and a manager will have data at disposal concerning the orders and the trucks. He should be able to analyse the data because it will be in one place.
|
|
|
Methodology ICONIX Process
Válková, Jana ; Pavlíčková, Jarmila (advisor) ; Kunstová, Renáta (referee)
The main part of this work deals with the introduction of agile, use case-driven methodology for software development ICONIX Process. The reader is first given to the principles of agile programming, which is followed by a detailed description of the methodology and all its stages with practical examples from the demonstration project - starting with a thorough requirements analysis, through design application, to outline the implementation and testing.
|
|
|
Fine ways of the enforcement of judgement for pecuniary claim amount
Kázsmérová, Adriana ; Kotoučová, Jiřina (advisor) ; Češková, Marie (referee)
This Bachelor's thesis describes the enforcement of judgement as an independent institute and compares it with the executory procedure. It is also dealing with the legal essentials of the enforcement of judgement as much as with the participation of foreign components. The main purpose of this thesis is to deepen the knowledge in the sphere of its chosen ways, that is order of court claim. From the point of view of the law this subject is really extensive. Consequently it is divided into individual chapters. Each of them analyses one type of order of court claim, which is different, depending on the object about which has to be decided. It also offers a clarification of nuisance and intangible claims and the procedure of replacement by the bailiff.
|
|
|
Application For Task Management Support
Varadinov, Petr ; Buchalcevová, Alena (advisor) ; Tichý, Vladimír (referee)
This bachelor thesis deals with the development of an application for task management support in a company environment, in a quality assurance department. The goal of the thesis is to analyze and develop an object oriented design of the application with flexibility and options of use in mind together with a relative simple solution. The sense of aim is to prepare for a fluent and smooth implementation and to put in operation successfully. The development is being led on an agile basis. Basic principles have been taken from OpenUP methodology. The thesis completes the project documentation and brings a very flexible solution of the defined problem, which enables the general conception of the application as a tool for the task management support, not only a tool for the testing support. There are six chapters. The first three chapters introduce the problem definition and its analysis. Chapter 4 deals with the solution design. At the end you can find the summary of the achieved results during the development and project prospect.
|
|
|
The web analysis and design methodology MANW
Karlec, Jakub ; Gála, Libor (advisor) ; Kafka, Daniel (referee)
The main subject of this thesis is to prepare the web analysis and design methodology, MANW. The first part of the thesis is dedicated to the definition of the methodological framework on the basis of which the methodology will be built. The framework comes out from the methodological framework MEFIS which has been accustomed to comply with specific needs of the web application and websites development. The second part of the thesis is dedicated to the research of existing methodologies for web project implementation. Based on the research, the elements of the methodologies suitable for analysis and design are selected and then incorporated into the MANW methodology. The last part of the thesis is the description of the methodology itself and description of its characteristics and elements. The goal of the diploma thesis is to prepare a simple methodology for websites and web applications analysis and design which can be used in agile web development. The methodology is described by its phases, processes, roles, inputs and outputs and other elements which are defined in the elaborated methodological framework. The output of methodology processes are the data for implementation, deployment and operation of web solutions. It was necessary to define the term methodology and define a methodological framework first in order to work out the methodology itself successfully. Another starting point for methodology design was the research of existing methodologies which also serves as an introduction to the problems of web projects implementation and provides an overview of existing tools. Output of the thesis is the MANW methodology which is a synthesis of the working experience and of a methodological framework theory. This methodology is easily modifiable and thanks to the clear process definition it can provide the companies with an effective solution of web products analysis and design.
|
|
|
Design and realization of small wireless network
Žebrák, Miroslav ; Pinkas, Otakar (advisor) ; Šmejkal, Ivo (referee)
This work deals with the design and realization of small wireless network. The achievement of the goal was enabled due to unique design tool and supported by thorough analysis. The first part describes wireless networks in general terms including types of networks and suitable places for its implementing. The next part focuses on norms, technologies and topology that wireless networks can use. The last chapter of the theoretical part explains basic terms of networks safety. The design of school wireless network and the computation of signal coverage is the main part of the work. The contribution of this work is that it serves as an example of the design system that shows how the design might be precise. Such a design can be the basis for the building up wireless network and enables subsequent verification of predicted results.
|
|
|
Proposal of marketing strategy for export of czech machining tools to ukrainian and russian markets
Maslova, Natalya ; Král, Petr (advisor) ; Břenda, Luboš (referee)
The aim of the thesis is to make a proposal for improvement of particular parts of the marketing mix for the czech company Kovosvit. The fisrt part of the thesis is devoted to the theory of industrial marketing and marketing mix. In the second chapter you will find Kovosvit MAS,a.s. description and analysis of its current marketing strategy for designated markets. The third chapter describes enterpreneurial environment on russian and ukraininan markets. Next part is devoted to the segmentation of producers and the analysis of three main competitors of Kovosvit, their strenghts and weaknesses in comparison to the latter. And finally, the last chapter describes the case study of implementation of Kovosvit's production in the ukrainian plant from the importer's side.
|
|
|
The design of database for the company Foram spol. s r.o.
Gottwald, Karel ; Palovská, Helena (advisor) ; Klas, Jan (referee)
The work deals with the definition of terms, mention of history and theory of design databases. The main objective was to propose a solution for the company Foram spol. s r.o. on the basis of theoretical knowledge in order to be usable in practice. The logic was to capture the reality of the best capturing given situation. It was necessary to communicate with the company and analyze their requirements. They defined the basis for drawing up a conceptual and physical model. Diagrams were created in PowerDesigner version 12.0. Finally, the functionality of the proposal was verified on the test data.
|
guest ::
