|
|
Comparative study on numerical and analytical assessment of elastic properties of metal foams
Koudelka_ml., Petr ; Jiroušek, Ondřej ; Doktor, Tomáš ; Zlámal, Petr ; Fíla, Tomáš
Recently, titanium metal foams are being considered as a suitable replacement for substituting trabecular bone microstructure especially for their similar pore distribution. The most common methods for determination of compressive effective elastic properties of such materials involve different approaches based on finite element analysis (FEA) of their microstructure. The internal geometry is usually modeled by two different methods - directly on the basis of a series of CT scans or using one of discretization schemes. However, all these techniques require highly specialized hardware, software and significant amount of computational time. In this paper, the effective elastic properties of the metal foam are instead obtained by analytical modulus-porosity relations and results are compared with previous FE based analysis.
|
|
|
Design and use of novel compression device for microtomography under applied load
Fíla, Tomáš ; Zlámal, Petr ; Koudelka_ml., Petr ; Jiroušek, Ondřej ; Doktor, Tomáš ; Kytýř, Daniel
This paper deals with modification and usage of custom-designed compression device, that allows real time X-ray tomography scanning of specimen under applied pressure. In this case microtomography is used to obtain data required to determine specimens morphology and to develop 3D material model (especially for cellular materials such as bones, metal foams and quasi-brittle materials or particle composites such as concrete or cementitious composites). Important design changes were made in the existing device frame to increase its load capabilities, stiffness and to accomodate a larger specimen. Finally device displacement measurements were conducted and calibration experiment was carried out.
|
|
|
On the reliability of microstructural models of trabecular bone with tissue properties from nanoindentation for bone quality assessment
Jiroušek, Ondřej ; Zlámal, Petr
Material properties of trabecular bone can be inversely determined by microstructural finite element (FE) models. The geometry of these models is developed using three-dimensional image data from microfocus Computed Tomography (micro-CT). The reliability of these models to predict the overall elastic properties is influenced by several factor, namely the tissue material properties, resolution of the input images, quality of the segmentation and quality of the FE mesh. This article describes all the aspects of proper and reliable inverse estimation of bone quality using the microstructural models with tissue properties assessed by nanoindentation.
|
|
|
Early Defect Detection of Acetabular Implants
Kytýř, Daniel ; Jiroušek, Ondřej ; Zlámal, Petr ; Doktor, Tomáš ; Jandejsek, I.
The paper is focused on possibilities of modern X-ray detectors and micro-focus X-ray source for investigation of early degradation processes of acetabular implants. To simulate the most adverse activity (downstairs walking) a hip joint simulator was developed. The experimental setup was designed for cyclic loading of polyethylene acetabular cup implanted into the human pelvic bone and fixed by commercial polymethyl methacrylate bone cement. To predict the bone degradation numerical analysis of detailed three-dimensional model of the acetabular cup and the cement mantle implanted in a bone block was performed. Using large area flat panel detector and microfocus X-ray source it is possible to investigate micro-damage propagation and detect early defect in the bone-implant interface.
|
|
|
Large-scale micro-finite element simulation of compressive behavior of trabecular bone microstructure
Jiroušek, Ondřej ; Zlámal, Petr
Microstructural finite element analysis has become a standard technique for evaluation of mechanical properties of trabecular bone. Due to the high complexity of the trabecular bone microstructure, the FE models have a very large number of elements (about 1 million elements per cubic cm in 50 μm3 resolution). To perform FE analysis of the microstructural FE models based on micro-CT scanning of whole bone samples (e.g. vertebral bodies) it is needed to solve 107 -- 108 equations. This article deals with comparison of approaches using voxel-based microstructural FE models to calculate the overall mechanical properties of trabecular bone.
|
|
|
Microstructural models of trabecular bone - comparison of CT-based FE models
Jiroušek, Ondřej ; Zlámal, Petr
In the article a detailed comparison of techniques used to developed detailed FE models of trabeculra bone microstructure is presented. The FE models are built using a stack of microtomographic images of trabecular bone. Compression test of a cylindrical sample taken from human proximal femur is virtually performed using FE models developed using different procedures. Effect of improper segmentation, mesh smoothing, mesh density, use of hexahedral/ tetrahedral elements, linear/ quadratic shape function is evaluated in parametric study. Material model is based on nanoindentation and numerical elastic properties of sample are compared to experimental results.
|
|
|
Deformační analýza trabekulární kosti za použití mikrotomografie v čase
Jiroušek, Ondřej ; Zlámal, Petr ; Kytýř, Daniel ; Kroupa, M.
Článek se zabývá experimentálním stanovením deformace vnitřní struktury trabekulární kosti, kdy za použití moderních detektorů je postupně tomograficky zaznamenán deformovaný vzorek kosti. Zatížení je na vzorek aplikováno postupně prostřednictvím speciálního zatěžovacího zařízení. Zachycené třírozměrné obrázky slouží pro sledování deformačního chování trabekulární mikrostruktury, kdy je možné identifikovat jednotlivé trabekuly a výsledky porovnat se simulacemi provedenými pomocí metody konečných prvků.
|
|
|
Kalibrace konstitutivního modelu trabekulární kosti na základě nanoindentace
Zlámal, Petr ; Jiroušek, Ondřej ; Němeček, J.
Práce zkoumá chování trabekulární kosti v průběhu nanoindentačního experimentu. Deformační chování je jednak zkoumáno za pomocí reálného nanoindentačního experimentu, tak i za pomocí numerické simulace testu. Jako podmínky plasticity pro MKP analýzu jsou použity kritéria dle von Misese s izotropním zpevněním a Drucker-Pragerova podmínka plasticity. Materiálové konstaty potřebné pro numerický model jsou obdrženy z porovnání experimentální křivky s křivkami z numerických simulací.
|
|
| |
|
|
Bezpečnost elektronického bankovnictví v České republice
Nečas, Marek ; Dvořáček, Jiří (vedoucí práce) ; Zlámal, Petr (oponent)
Bezpečnost elektronického bankovnictví vždy byla, je a bude důležitým faktorem, který má vliv na chování uživatelů i finančních institucí. Bezpečnosti je potřeba neustále se věnovat, sledovat možné hrozby, ale i nové příležitosti. Banky by měly nabízet moderní způsoby zabezpečení a mít fungující bezpečostní politiku. Klienti by měli mít jistotu, že jejich finanční úspory jsou v bezpečí. K tomu by měli využívat modernější a bezpečnější technologie.
|
host ::
RSS.