Národní úložiště šedé literatury Nalezeno 40 záznamů.  začátekpředchozí21 - 30další  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Inhibition of Benzothiophene HDS by Quinoline on PdMo and CoMo/Al2O3 Catalysts
Vít, Zdeněk ; Kaluža, Luděk ; Gulková, Daniela
In this work, the effect of quinoline on benzothiophene HDS was compared with the effect of pyridine on thiophene HDS. This is because benzothiophene and quinoline are closer to practical application.The main goal is to find, if the highrr nitrogen tolerance observed during thiophene reaction occurs also with heavier sulfur and nitrogen molecules. Mo/Al2O3 modified by Pd was selected for this study.
Plný tet: SKMBT_C22012110811243 - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Unconventional Sulfide Hydrotreating Catalysts Prepared by Deposition of MoO3 and CoCO3 with the Assistance of Nitrilotriacetic Acid on ZrO2 Support
Kaluža, Luděk ; Gulková, Daniela ; Vít, Zdeněk ; Zdražil, Miroslav
The most active unconventional hydrotreating CoMo/ZrO2 catalyst was prepared by the impregnation of the support from the solution made by dissolution of MoO3, CoCO3 and nitrilotriacetic acid in water followed by sulfidation without previous calcination.
Plný tet: SKMBT_C22012110811241 - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Activity of CoMo/MSA Catalysts in Benzothiophene Hydrodesulfurization, Cumene Cracking and Cyclohexene Isomerization
Gulková, Daniela ; Kaluža, Luděk ; Zdražil, Miroslav ; Vít, Zdeněk
It was found that MoO3 does not adsorb onto pure SiO2 despite its relatively high surface area (400 m2/g). In contrast, SA52, MSA30, and MSA19 with surface areas 430, 580 and 600 m2/g adsorbed about 14, 7 and 3 wt. % of MoO3, respectively. The content of Al2O3 in the SA based materials thus well correlated with the adsorption loadings of MoO3 achieved by the saturation experiments. Moreover, it was acquired that the highest dispersion and HDS activities were achieved over catalysts containing dealuminated MSA supports despite of relatively low loadings of Mo. After Co deposition, the weight normalized activities in BT HDS increased 2.2 and 4.3 times on effective MoS2 promotion by Co on more acidic supports. Furthermore, those catalysts keep the high acidities of the original supports, as it was determined by cyclohexene isomerization and cumene cracking, while industrial reference CoMo catalysts supported onto gamma-Al2O3 was found to exhibit low acidity.
Plný tet: SKMBT_C22012102413541 - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
CoMo/ZrO2 Hydrodesulfurization Catalysts Prepared by Chelating Agent Assisted Spreading
Kaluža, Luděk ; Zdražil, Miroslav ; Vít, Zdeněk ; Gulková, Daniela
The aim of this work is to elucidate on deposition of Co and Mo with the use of the chelating agent NTA onto the monoclinic form of ZrO2.
Plný tet: SKMBT_C22012102413511 - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Inhibitive Effect of Pyridine and Toluene on HDS of Thiophene over Mo/Al2O3 Based Catalysts
Gulková, Daniela ; Vít, Zdeněk
It was found that HDS activities of Mo and CoMo catalysts were strongly inhibited by pyridine and activity of RhMo catalyst was inhibited less. On the other hand, suppression of HDS by toluene over Mo catalyst was very small and no suppression by toluene was observed over the promoted CoMo and RhMo catalysts.
Plný tet: 20120214223034 - Stáhnout plný textPDF
Plný text: content.csg - Stáhnout plný textPDF
Inhibiční vliv pyridinu na HDS na Mo/Al2O3 modifikovaném vzácnými kovy
Vít, Zdeněk ; Kaluža, Luděk ; Gulková, Daniela ; Zdražil, Miroslav
Byla studována citlivost katalyzátorů v HDS thiofenu k inhibici pyridinem. CoMo katalyzátory byly nejaktivnější v samotné HDS, ale nejcitlivější k inhibici. Mo/Al2O3 modifikované Ru a Rh byly mnohem více tolerantní k inhibici.
Vliv nosiče při hydrodesulfurizaci na sulfidu ruthenia
Gulková, Daniela ; Kaluža, Luděk ; Vít, Zdeněk ; Zdražil, Miroslav
Byla studována hydrodesulfurizace thiofenu na sulfidu ruthenia naneseném na Al2O3, MgO, TiO2, ZrO2 a aktivním uhlí. Katalyzátory (1, 3 a 6% váh. Ru) byly připraveny impregnací vodným roztokem RuCl3. Jedinou vyjímkou byl Ru/MgO, který byl připraven impregnací methanolickým roztokem acetylacetonátu ruthenia. Katalyzátory byly předsířeny směsí 10% H2S/H2 nebo 20% H2S/N2 při 400 oC. Jejich aktivita byla testována při 400, 370 a 340 oC. Katalyzátory sířené H2S/N2 byly aktivnější než katalyzátory sířené H2S/H2. Rozdíl stoupal s obsahem Ru a závisel na nosiči. Nejvyšší byl byl s TiO2 a ZrO2 a nejnišší s Al2O3 a aktivním uhlí. Katalyzátory na bázi Ru byly aktivnější než Mo/Al2O3 s odpovídajícím obsahem kovu. Pořadí aktivity bylo nezávislé na metodě aktivace.

Národní úložiště šedé literatury : Nalezeno 40 záznamů.   začátekpředchozí21 - 30další  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.