Národní úložiště šedé literatury Nalezeno 14 záznamů.  1 - 10další  přejít na záznam: Hledání trvalo 0.01 vteřin. 
Numerical simulation of cardiovascular baroreflex control
Převorovská, Světlana ; Maršík, František
At the IT CAS has been developed the programme for numerical model of the human cardiovascular system including the model of the electrochemical and mechanical activity of the heart and the baroreflex mechanism. The programme has been used to the simulation of the cardiac failure in a consequence of the myocardial hypocontractility.
Systemic compliance effect un failing heart support (mechanical model study)
Musil, Jan ; Pražák, Josef ; Leitermann, David
The systemic compliance changes during singel rotary pump support on a symplified circuit were studied. Thus rotation speed of the supporting rotary pump, frequency rate of the failing ventricle under the changing conditions of compliance of the systemic branch (aortic root) were invesigated. The systemic compliance effect enhances the common flow of the rotary pump and the pulsating supported ventricle.
Loosening of press - fitted pivots
Dobiáš, Jiří ; Höschl, Cyril
If a press-fitted clamped-free pivot is exposed to alternating loading at its free end while the forces act normal to its central axis, a gradual global displacement of the pivot in the axial direction may occur under some circumstances.
Heart failure support in mathematical model with baroreflex control
Musil, Jan ; Převorovská, Světlana ; Maršík, František
The function of the mechanical support in the case of the heart failure in the consequence of the left heart ventricle hypocontractility has been simulated by the numerical model of the cardiovascular system with the baroreflex control which has been developed at the IT CAS.
Damping caused by interaction of limited energy source and vibrating system
Půst, Ladislav ; Škuderová, Alena
Analysis of mentioned interaction proved that it introduces strong damping into vibrating system, which itself has no internal damping. Induced damping depends on the slope of motor charakteristic and on the structure of influenced system.
On the solution of a natural vibration of cylindrical shells in interaction with flowing fluid
Zolotarev, Igor ; Pelletier, D.
The present paper is a contribution to the solution of a natural vibration of circular cylindrical shells in interaction with flowing inviscid fluid. The mathematical model of the studied system contains general boundary conditions of the shell for ends clamped elastically and allows to use the method of solution are based on the [1,2,4,5]. A new more accurately algorithm for calculation of the action of flowing fluid on the vibrating surface of the shell and frequency-modal properties of the studied system there are presented. Obtained results correspond to the earlier calculations of the natural frequencies and its variations on the flow velocities [4,5].
Selected Problems of Hip Joint Alloplasty
Jírová, Jitka ; Jíra, J. ; Micka, Michal
The paper deals with the study of interaction of various types of acetabular cups with pelvic bone using 2-D FE models and applying ANSYS programme and by experimental and numerical research of the cementless acetabular cup - Beznoska type using strain gauge measuring and 3-D FE model.
Kritické napětí pro šíření trhlin v betonu
Náhlík, Luboš ; Knésl, Zdeněk
Příspěvek se zabývá šířením trhlin v betonu. Beton je uvažován jako dvoufázové prostředí. První fáze (matrice) je tvořena cementovou pastou. Druhá fáze (částice) je tvořena zrny kameniva. Existence rozhraní mezi cementovou pastou a zrny kameniva hraje významnou roli v případě šíření trhlin v betonu. Lomové chování betonu může být silně ovlivněno existencí tohoto rozhraní a jeho vlastnostmi. V práci je za podmínek platnosti lineární elastické lomové mechaniky odhadnuta velikost kritického napětí potřebného k porušení částice (zrna kameniva). Je studována velikost tohoto kritického napětí v závislosti na různých materiálových vlastnostech cementové pasty (matrice) a zrn kameniva (částic). Pozornost je věnována vlivu Poissonových čísel obou fází na velikost výsledného kritického napětí vedoucí k rozlomení zrna kameniva.
Study of the plastic zone shape and size in the V-notch tip vicinity
Klusák, Jan
The aim is to formulate the stability criterion of V-notch using the study of a plastic zone around the V-notch tip, i. e. determine the critical value of a generalized stress intensity factor HIC in dependence on fracture toughness KIC, yield strenght sigma0 and V-notch open angle 2.alpha.
A model for estimation of threshold values V-notch emanating fatigue cracks
Klusák, Jan
Threshold values for V-notch emanating fatigue cracks are expressed by means of threshold value for high cyclic fatigue crack propagation and the open angle of a V-notch. The conditions of V-notch cyclic stability are formulated.

Národní úložiště šedé literatury : Nalezeno 14 záznamů.   1 - 10další  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.