|
|
Electronic parts of small fotovoltaic power plant
Benda, Dušan ; Šťastný, Ladislav (referee) ; Bradáč, Zdeněk (advisor)
The thesis describes the design, implementation and subsequent testing of electronic circuits for usage in small photovoltaic power plants. It focused on the sub-power appliances, battery charging and monitoring of photovoltaic panels. Introduction of this work deals with selecting appropriate controllers for each subsystem and comparison of the proposed facilities with commercially available applications. A substantial part of the work describes the selected controller for each subsystem implemented and circuit design of the individual components of electronic systems in detail. For each subsystem are implemented measuring and comparing the results achieved.
|
|
|
Laboratory Pulse Power Supply Controlled by Microcontroller
Chytil, Jiří ; Kubíček, Michal (referee) ; Šebesta, Jiří (advisor)
This project deals with design of switching laboratory supply controled by PIC microcontroler. It consist of three modules: control unit and couple of power modules. Each of the modul is controled by PIC18 microcontroler. Device should work autonomicaly or it can be connected with PC via USB. Output paremeters 0-20 V, 0-1 A. The device has been designed with regard to minimal power consumption.
|
|
|
Uninterruptible Supply of the Hospital Information System
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
Usage of High Power Inverters in High Voltage Sources
Zemánek, Miroslav ; Janča, Jan (referee) ; Boušek, Jaroslav (referee) ; Patočka, Miroslav (advisor)
This work is concerned with power inverters for alternate high voltage power sources. The theoretical part describes the topology of inverters that can be used in alternate power sources. A model of voltage transformer is described in details to better understand the parasitic effects that are inevitably present in high voltage power sources and, therefore, have to be taken into consideration at the design of high voltage power sources. The work is oriented to problems of alternate high voltage power sources for ozone generators. This is the reason, why the theoretical and, partially, also the experimental part deal with the properties of ozone and its use. The experimental part solves high voltage inverter with capacitive load that is formed by discharge element of an ozone generator. Designed inverter is able to feed the capacitive load with high voltage at very short periods of time from several microseconds up to tens of nanoseconds. In comparison with the length of voltage pulses in common ozone generators, this pulses are more than 100-time shorter. This has a positive effect to silent discharge characteristics.
|
|
|
Laboratory Switching Power Supply
Slezák, Jakub ; Petržela, Jiří (referee) ; Šebesta, Jiří (advisor)
This bachelor’s thesis is concerned with design switching power supply based on forward converter with output voltage regulated in the range of 3 to 30V and load current to 1 A. First of all, it discusses the theoretical solution of basic types of converters and switching power supply problems. Followed by a proposal of various parts source, which was first established in the test version on the test board. Then was proposed printed circuit board and complete mechanical solutions. Source is also equipped with digital modules for measuring voltage and current, and is protected against overload.
|
|
|
Precise adjustable power suplly
Pawlas, Andrzej ; Magát, Martin (referee) ; Kadlec, Jaroslav (advisor)
This bachelor´s thesis deals with the proposing precise switching power supply. This switching power supply works with a maximum of 99 % duty cycle. Input voltage is 12 V and output can be set in the range of 1.2 V - 11.9 V. Current can be a source of burden 0 A - 20 A. The entire power supply is controlled by microcontroller. While addressing the proposal switching power supply have been developed five prototypes. Last prototype works well, but the output appeared significant interference.
|
|
|
Power supply system for mobile devices with high effiency
Vičar, Ondřej ; Kledrowetz, Vilém (referee) ; Brna, Jaroslav Rakušan, ENERGOKLASTR, Slavkov u (advisor)
This Master’s thesis is focused on design of voltage converter’s system operating with supply voltage of batteries. There are selected appropriate types of batteries, converter topologies and modes of their control. The specified output branches are systematically divided into three separate modules. Each module is designed in detail with focus on high efficiency. The modules are implemented and optimized. Parameter of final modules were measured and compared with correctness of design and theoretical assumptions.
|
|
|
Controled laboratory voltage suplier
Vít, Tomáš ; Valach, Soběslav (referee) ; Macho, Tomáš (advisor)
The aim of my master’s thesis is the design and implementation of laboratory power supply with output parameters 0-25V and 0-2A and options to manage this resource by elements of the front panel or via a computer control program. Content is the theoretical analysis of the possibility of subsequent theoretical sources suggesting that it verified on the prototype laboratory resources.
|
|
|
Switched power supply
Krist, Jakub ; Kosina, Petr (referee) ; Pavlík, Michal (advisor)
The thesis is focused on design the switching power supply according to Push-pull topology rules. The work describes basic theoretic principles of Push-pull topology with design of circuit and circuit elements.
|
|
|
High-Power Li-Ion Battery Charger for Electromobil powered by Hydrogen Fuell-Cells
Šuňal, Martin ; Červinka, Dalibor (referee) ; Hejkrlík, Jan (advisor)
Main target of this thesis is deisgn High-Power Li-Ion Battery Charger. The next step is realize and energize it. Charger is designed as switching power supply concretely with regulators and electronic protects.Convertrer is directed with integrated circuit UC3845. This intelligent charger enables to get a very high output current (30A) and it has small dimensions. Usage of DC/DC convertrer as a base of a charger has many advantages like easy output current control, small dimensions, low weight and low production costs.
|
guest ::
