|
|
Apartment building, Střelice
Vaníček, Marek ; Rebrova, Tatiana (referee) ; Kacálek, Petr (advisor)
The subject of the bachelor thesis is design of a new detached apartment building in Střelice. It is presented as a form part of project documentation for a building construction. The building has a cellar and two above-ground floors. It is founded on a strip foundation and pads. The building is roofed by a single-shell flat roof. There are 4 apartment units in the above-ground part containing 3 rooms with a kitchen and 4 rooms with a kitchen with a balcony or a terrace. In the basement, there are technical facilities, four individual garages and storage space for residents of the apartments. Structural system of the building is wall transversal masonry system from clay blocks. Part of the ceiling structure is made of cast-in-place reinforced concrete and the rest is beam and block ceiling structure. The whole building is insulated with contact thermal insulation.
|
|
|
Apartment building “Poco”
Šlampová, Kateřina ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
This bachelor thesis elaborates the project documentation for the construction of an apartment building in the town Brno, located in town disctrict Královo Pole. The apartment building has five floors (basement floor included) and has five residential units with common areas of the house and space for parking in a basment floor. In a first floor there is an office with a storage room and hygienic equipement. The vertical loadbearing structures are made of ceramic brick technology Porotherm 30 S Profi with facade thermal insulation Isover 70F of thickness 150mm. Horizontal structures are monolithic - reinforced concrete. The roof is made up as pitched roof konstrution in saltbog roof shape. The design emphasized increased comfort in use and the overall modern concept of an apartment building.
|
|
|
Newly-Built Terraced Apartment Building in Velké Meziříčí
Pokorný, Patrik ; Pilný, Ondřej (referee) ; Kalousek, Lubor (advisor)
This bachelor thesis elaborates the project documentation for the construction of building. Project of apartment building with huge tarrase in each apartment units. Building is located on the outskirts of Velke Mezirici in the area of new resident developement with view on the whole town. Terraces on the south side are connected to living room, kitchen or bedroom. Private zone is located on the north side of building. This project emphasizes on roominess of the most frequented habitable rooms which is living room with kitchenette. Architectural design of building in cube shape with the sequence of terraces creates the appearance of a giant staircase. On the north side is located porch which is recessing into the building.
|
|
|
Apartment Building in Litomyšli
Navrátil, Michal ; Pospíšil, Jaroslav (referee) ; Kolář, Radim (advisor)
This bachelor thesis elaborates the project documetation for the construstion of a new apartment building in Litomyšl. The city is located in Pardubice region.The apartment building has three above-ground floors. The house is non-cellular. The object contains six apartment units. The house is located in a sloping terrain. The building is based on a concrete monolithic strip foundation and footings. The perimeter masonry is out of the system VELOX, which consists of štěpkocement board. The boards form a lost formwork fulfilled concrete core, in which the thermal insulation of the stabilized expanded polystyrene with addition graphite is incorporated. The celling construction is constituted of monolithic reinforced concrete slabs, which are reinforced by a cross or one-way. The walls in the contact with the soil are made from the lost formwork of štěpkocement boards fulfilled with a concrete core with thermal insulation extruded polystyrene in the backsplash zone. Above this level there will be an insulation of non-flamble mineral wool. The roof is warmflat and its stabilizing layer is made of fluvial aggregate. On the roof a roof garden with a layer of plastic tercce planks is placed.
|
|
|
Apartment building in Krnov
Janková, Denisa Anna ; Kvapilová, Vendula (referee) ; Jelínek, Petr (advisor)
This bachelor thesis elaborates the project documentation for the construction of an apartment building in Krnov city, located in the Moravian-Silesian region. The apartment building has three residental floors (and one basement floor) and has five residential units and common areas of the house. The vertical loadbearing structures are made of ceramic brick technology Porotherm and Heluz and lost formwork BEST. Horizontal structures are monolithic. The roof is made up of a flat roof with stabilizing layer from aggregate. The design emphasized increased comfort in use and the overall modern concept od an apartment building.
|
|
|
Apartment building
Kubů, Michal ; Hnízdilová, Aneta Aya (referee) ; Daněk, Lukáš (advisor)
The aim of a bachelor thesis is design of a apartment building in Humpolec in Highlands Region. The building is designed as a detached building with three above-ground floors and a full basement. The building has six separate apartment units, one of which is designed as barrier-free. The main support system is designed from ceramic masonry. Basement masonry is made of the permanent concrete formwork. The roof of the apartment building is designed as flat. Project documentation was prepared according to valid legal and technical regulation.
|
|
|
Small apartment house
Malec, Pavel ; Šoulová, Eva (referee) ; Utíkalová, Ivana (advisor)
The subject of my bachelor´s thesis is to elaborate the project documentation for construction execution of the house in the village Trnava close to Třebíč which is found in the Vysočina Region. The house has 3 floors out of which two are residential areas and in each of them there are two residential units. On the first floor shared areas can be found. Vertical supporting constructions are made by walled technology from ceramic breeze-blocks Porotherm 30T Profi Dryfix and Porotherm 25 AKU SYM. Horizontal contructions are assembled from Porotherm supporting elements and MIAKO walled breeze-blocks. Roofing is made by an aisle roof. During the design processing the impact was put on increased comfort for using it and the overall modern concept of the house.
|
|
|
Multi-functional Building
Kožina, Jan ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
The subject of my diploma thesis is the design documentation for polyfunctional building and will be supplemented with a specialty from the air-conditioning branch. The building is situated in the town Velká Bíteš and it's located at 336/1 and 336/8 about the total area of 5110 m2. The building has a L-shaped ground plan consisting. Has got three above-ground floors with partial basement. The building is designed as masonry structure with sharpened clay blocks Porotherm 38 Profi with thickness 380 mm. The ceiling from structure prestressed concrete floor slab Spiroll. The roof of the building is suggested as a single-coated flat roof. The building is covered with a ventilated facade from fiber cement board and thermal insulation is mineral fibreglass insulation Isover Multimax. The building is located on the first floor of the fitness room, on the second floor are offices and on the third floor there are 4 flat.
|
|
|
44/5000 The newly built multipurpose building in Brno - Lisen
Vejmělek, Lukáš ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
This diploma thesis deals with the project documentation of the new building of a polyfunctional building, located in the Brno-Líšeň district, specifically on the street Zikova with plot no. 8362/6. The polyfunctional building is L-shaped and has a basement floor, the shorter part of the letter L has one above-ground floor, the longer part of the letter L has three above-ground floors. The stop of the building is designed as a flat, vegetation roof. Individual floors are accessible from two stair towers with elevator shafts located to the left and right. The diploma thesis contains all mandatory elements and the building itself is designed in accordance with the town plan of the city of brno with all valid laws and other legal regulations and valid czech state standards. Drawing documentation is processed in AutoCAD.
|
|
|
Apartment building Jemnice
Dlabaja, Adam ; Burianová, Lenka (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis elaborates the project documentation for the construction of an apartment building in the village Jemnice, located in the Vysočina Region. The apartment building has two residential floors (and one basement floor) and has four residential units and common areas of the house. The vertical loadbearing structures are made of ceramic brick technology Porotherm 50T Profi Dryfix with integrated mineral wool in cavities. Horizontal structures are monolithic. The roof is made up of a flat roof with extensive greenery. The design emphasized increased comfort in use and the overall modern concept of an apartment building.
|
guest ::
