|
|
Thermal analysis of Gunn diode
Chára, Pavel ; Lukeš, Zbyněk (referee) ; Pokorný, Michal (advisor)
The aim of bachelor’s project has been thermal analysis of Gunn diode. Gunn diode model involving thermal effects was analyzed in COMSOL Multiphysics. Another task was to design a suitable heat sink for diode and its proper function to verify simulations.
|
|
| |
|
|
Study of thermal properties of materials for solar cells lamination
Dohnalová, Lenka ; Matiašovský, Peter (referee) ; Zmeškal, Oldřich (advisor)
The topic of presented bachelor´s thesis was study of thermal properties of materials for solar cells lamination. The main goal of this thesis was measuring and characterisation of the basic thermal properties of volume materials and plastic films, which are used to solar cells lamination. At first a thermal response to a concrete thermal pulse was measured by the thermoelectric thermometer. Then there was studied the distribution of temperature on the surface of a sample during heating and cooling by the non-point heat source. At the beggining of this thesis it was needed to define heat and ways it´s spread, then the basic thermal properties and also methods of their determination. The ways of measuring temperature were described and then used in praxis. My thesis deals with study of thermal properties volume materials. It was needed to characterize measured volume material and define it´s thermal parameters, because the values of thermal parameters of measured samples of lamination films were compared to these values. This thesis is concerned in solar cells too. So there were also described their structure, properties, utilization and way of their production. After the definition of all needed therms the experimental part of this thesis was begun. At first the thermal response of each of the eight different samples was measured by the pulse transient method. Then there was studied the thermal field on the surface of the sample by thermocamera through using the pulse transient method. Findings of both methods were finally compared.
|
|
|
Laboratory heating of MV cables
Vala, Martin ; Lázničková, Ilona (referee) ; Krbal, Michal (advisor)
This thesis deals with options of laboratory heating of high voltage cables. First part of the work is reserved for description of heat as physical phenomenon and quantities connected with the heat. Second part deals with options of temperature measurements of objects in practical use and third part of the work deals with options of cables heating regarding the measurements according the ČSN rules. Practical part of diploma thesis is focused on physical phenomenon description, being under way during measurement using selected methods in individual components and optimization of results for practical measurements.
|
|
|
Investigation of temperature change in lead-acid accumulator for HEV
Tošer, Pavel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The oldest and also most used type of secondary cells is lead-acid accumulator. Basic functional principle stayed same as in foundation time, only operation parameters are still improving (for example one of the most important is lifetime). Significant technical problem is temperature of lead-acid battery and her influence on functionality and running reactions. Master thesis is focused on this section, when is necessary to evaluate new pieces of knowledge in development. The work deals with description existing types of accumulators, further deals with theory of temperature balance and in the end by measured datas and theirs analyzing.
|
|
|
Powerline control of home appliances
Letocha, René ; Mádr, Tomáš (referee) ; Kolka, Zdeněk (advisor)
The work deals with communication options, the power line and particularly the use of this technology in home automation to control heating and reduction in standby mode for selected domestic appliances. The issue is outlined in detail first and then examined in detail. The publication outlines a possible variant of such a device that can detect movement in the house and on the basis of such information to adjust the energy profile. The device is from its base designed to minimize the consumption of heat and electricity.
|
|
|
System Proposal for the Use of Low-potential Heat
Kučera, Roman ; Bartoň, Jan (referee) ; Mastný, Petr (advisor)
This bachelor thesis deals with the problematics of a low-potential heat from the energetics point of view. It also deals with the sources and subsequent use of the low-potential heat. First of all, the thesis mentions the origin of these sources and also describes where they can be found. Also the technologies, that are able to utilize this heat, like heat pumps and solar collectors, are mentioned in this part of the thesis. In its next part, the bachelor thesis deals with use of the waste heat for heating and production of electrical energy. In the last part, the thesis presents the project that introduces a specific concept of the system for object heating from the waste heat.
|
|
|
Impact of temperature and drought on gliadins and glutenins contents in four varieties of wheat
Tomasz, Teresa ; Vítová, Eva (referee) ; Hrstka, Miroslav (advisor)
This diploma thesis deals with an influence of high temperature and water shortage on the protein content of gliadin and glutenin fractions in four varieties of winter wheat: Bohemia, Tobak, Pannonia and var. Syria with designation S46 (IG142780). The crop was grown at 26, 29, 32, 35, 38 and 41 °C during anthesis under control irrigation treatment (with soil moisture higher than 70 %) or under drought stress (with soil moisture lower than 30 %). To separate gliadins, the A-PAGE method was used, and glutenins were separated by SDS-PAGE method. Proteins were quantified by computer densitometry. Significant influence of genotype on the gluten proteins was found. Variety Pannonia has high content of -, 5-gliadins, LMW and HMW glutenins, but low content of other gliadin fractions. It was the opposite in the other varieties. Due to temperature, as well as drought, there was an increase in the content of all gluten fractions, especially of HMW glutenins, 1,2-gliadins and total gliadins. The largest increase in the gluten fractions due to drought was observed in Syria variety. In other varieties simultaneous exposure to drought and heat caused decrease in gliadin content, but increase in glutenin content. Drought at high temperatures reduced gliadin-to-glutenin ratio, mostly in Bohemia variety. This ratio has increased due to the temperature, especially in Tobak variety. For Syria variety, no effect of stress conditions was found on gliadin-to-glutenin ratio.
|
|
|
Waste heat recovery from technological processes
Bednařík, Jakub ; Bača, Petr (referee) ; Vaněk, Jiří (advisor)
Master thesis deals with the utilization of waste heat from Nova Mosilana company. Theoretical part of this work is focused on the waste heat description (heat, heat quantity, heat temperature/quality, composition of waste stream) in which a considerable energy potential is hidden. The other parts describe waste heat technology, especially heat pumps, Organic Rankine Cycle (ORC) and system absorption cooling. Some of the technologies described in the theoretical part are used in the design of the more efficient existing waste heat utilization, especifically power and cold production.
|
|
|
Computation of thermal network of switchgear type UniGear and comparison with the real temperature rise test
Rybka, Michal ; Tůma, Drahomír (referee) ; Orságová, Jaroslava (advisor)
The Master’s thesis deals with thermal network computation of UniGear type switchgear and it compares the calculated results with the real temperature rise test. The thesis describes both electrical and non-electrical characteristics of such a switchgear as well as its application in variol fields of industry. Description of switchgear auxiliary equipment is obvious part of the thesis. Modelling of current carrying track in software environment of Autodesk Inventor and preparing of this current carrying track for thermal network calculation in software environment of ANSYS follows. Main part of this thesis is presentation of thermal analysis results and their comparison with the real temperature rise test.
|
guest ::
