|
|
Multifunctional building
Fátor, Martin ; Mikošek, Marek (referee) ; Hlavačka, Tomáš (advisor)
This final thesis concerns the new building of mixed-use building in Hořice. It has one floor partly below ground level and three floors above ground. There are garages for residential area, warehouse and boiler room in 1PP. There are offices and their base in the 1st and 2nd floor. There are 4 residental units in the 3rd floor. The building is designed in a shape of a rectangle. The roof is flat. There is the contact thermal insulation. There is designed gas boiler for heating. The supporting structure of the ceiling is monolithic concrete slab.
|
|
|
Wood-based Block of Flats
Balcar, Jan ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The Master´s thesis addresses the design of wooden residential building. It is a four-storey building with a gabled roof with a slope of 15°. Building is designed for housing 32 people. The building is located on flat terrain. The main structural system are KLH solid wood panels with insulation layer on the outside. The ground floor is brick and consists of rooms of technical support and garages. The Master´s thesis includes project documentation for construction execution.
|
|
|
Construction technological project of construction of an administrative building with garages
Hrabovský, Lukáš ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
The subject of this diploma thesis is the elaboration of a construction technological project for the construction of an administrative building with garages in Prague. The building is located in an enclosed area in the Prague-Veleslavín district. The main subject of this thesis is the elaboration of a technical report, a coordination situation of the construction with broader relations of transport routes, a time and financial plan of construction - object, a study of implementation of main technological stages of building, a project of the site equipment, a design of main construction machines and mechanisms, a time plan of main building, a plan of material resources, a technological regulation for the implementation of monolithic ceiling structures, a quality control and testing plan for monolithic ceiling structures. The diploma thesis also includes the calculation of construction according to THU, a occupational health and safety plan, concreting economics, a noise study, a selected points LEED certification and a budget with site equipment costs.
|
|
|
Office building JMC Brno
Honzl, Jakub ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The aim of this master’s thesis is to elaborate the project documentation of an office building in Brno with nearly zero energy consumption. This building consists of 2 parts. First part is a two-storey building with a basement. In the basement are storages and mechanical rooms. On the first floor is a cafe and sanitary facilities. On the second floor is an open-space, two meeting rooms and a manager's office. Second part of the building are garages that has one above ground floor and one underground floor. The structural system of the building is RC frame, and it stands on grillage foundation. The office part is roofed with warm flat roof and external walls are insulated with insulating panels made of mineral wool. The garage part is roofed with green roof. This master’s thesis consists of 3 parts. First one processes the application for a building permit. Second part deals with technical equipment of the building namely design of boiler, ventilation and photovoltaic panels. Third part deals with life cycle assessment of different composition of floors. It compares these floors and evaluates them. And in the end the floor which has the best results is implemented back into the project.
|
|
|
Multifunctional building
Prokop, Stanislav ; Myslín,, Jiří (referee) ; Maceková, Věra (advisor)
The diploma thesis deals with the design and elaboration of the project documentation of a polyfunctional house with a café in Kyjov. The new building is located in the northern part of the city. It is a 4 floor object, partlial basement building with a saddle roof. The house is based on plain concrete slabs. The supporting peripheral and internal masonry is designed from POROTHERM brick blocks. In the cafeteria, an open layout is proposed using beams and columns. Ceiling structures are designed from the POROTHERM MIAKO system. The roof structure is designed with a truss with sheet metal cover. The perimeter walls in the 1PP are designed from blocks of loose formwork filled with concrete, which are insulated with extruded polystyrene. The building is functionally divided into 2 parts, each with its own entrance. The café is equipped with a vestibule, its own café, toilet for women and men with cabins for handicapped visitors and a background with a storeroom, dressing room and WC with a hall. The residential part consists of 4 garages and 6 apartments, 2 of which are adapted for the handicapped. The object is designed with natural ventilation. The object is barrier-free. In front of the building is proposed a parking space for 9 seats, 2 of which are designed for handicapped and 2 for apartment owners.
|
|
|
Office Building
Nukeyeva, Assem ; Sláma, Ludvík (referee) ; Mohelníková, Jitka (advisor)
This diploma thesis was prepared as a construction project documentation. The proposed building is an office building in Prague. The building has 4 above-ground floors and 1 underground floor. On the above-ground floors the office spaces are located, while the underground floor is designated as garages. Monolithic reinforced concrete skeleton with beams was chosen as the construction system.
|
|
|
Mixed-use building in a city
Kopijevská, Kateřina ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the design of a multifunctional house in Poděbrady. The work is based on the study in the subject AG034 - Studio of Architectural Creation 4. The solved area is located between Paroubkova Street and Jiřího náměstí in Poděbrady, where the height difference between the street and the square is 6.3 m and the goal is to connect these two places with passage. It is an extension to the existing burgher house, whose northern facade towards the square is under historical protection. The extension is therefore located on the western part of the plot. A staircase from Paroubkova Street to the atrium serves to overcome the height difference. The building consists of 6 floors, where 3 floors serve as garages, which 1 of them is completely underground, and 3 floors, which are used for civic amenities and housing, which are connected to the existing building. There is a roofed atrium as a connection between the existing and the newly designed building. On each floor there are 3 residential units with a disposition of 3 + KK, where the apartments are connected by a built-on gallery. The optical barrier between the atrium and the apartments is formed by a designed steel dividing wall. The construction system of the building is combined from reinforced concrete columns with girders and a wall. The ceiling structures are designed from reinforced concrete slabs. The structure is partly covered by a flat roof and partly by a glazed roof.
|
|
|
Mixed-use building in a city
Kopijevská, Kateřina ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Matějka, Libor (advisor)
The subject of the bachelor thesis is the design of a multifunctional house in Poděbrady. The work is based on the study in the subject AG034 - Studio of Architectural Creation 4. The solved area is located between Paroubkova Street and Jiřího náměstí in Poděbrady, where the height difference between the street and the square is 6.3 m and the goal is to connect these two places with passage. It is an extension to the existing burgher house, whose northern facade towards the square is under historical protection. The extension is therefore located on the western part of the plot. A staircase from Paroubkova Street to the atrium serves to overcome the height difference. The building consists of 6 floors, where 3 floors serve as garages, which 1 of them is completely underground, and 3 floors, which are used for civic amenities and housing, which are connected to the existing building. There is a roofed atrium as a connection between the existing and the newly designed building. On each floor there are 3 residential units with a disposition of 3 + KK, where the apartments are connected by a built-on gallery. The optical barrier between the atrium and the apartments is formed by a designed steel dividing wall. The construction system of the building is combined from reinforced concrete columns with girders and a wall. The ceiling structures are designed from reinforced concrete slabs. The structure is partly covered by a flat roof and partly by a glazed roof.
|
|
|
Office building JMC Brno
Honzl, Jakub ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The aim of this master’s thesis is to elaborate the project documentation of an office building in Brno with nearly zero energy consumption. This building consists of 2 parts. First part is a two-storey building with a basement. In the basement are storages and mechanical rooms. On the first floor is a cafe and sanitary facilities. On the second floor is an open-space, two meeting rooms and a manager's office. Second part of the building are garages that has one above ground floor and one underground floor. The structural system of the building is RC frame, and it stands on grillage foundation. The office part is roofed with warm flat roof and external walls are insulated with insulating panels made of mineral wool. The garage part is roofed with green roof. This master’s thesis consists of 3 parts. First one processes the application for a building permit. Second part deals with technical equipment of the building namely design of boiler, ventilation and photovoltaic panels. Third part deals with life cycle assessment of different composition of floors. It compares these floors and evaluates them. And in the end the floor which has the best results is implemented back into the project.
|
|
|
Construction technological project of construction of an administrative building with garages
Hrabovský, Lukáš ; Nečasová, Barbora (referee) ; Diaz, Yvetta (advisor)
The subject of this diploma thesis is the elaboration of a construction technological project for the construction of an administrative building with garages in Prague. The building is located in an enclosed area in the Prague-Veleslavín district. The main subject of this thesis is the elaboration of a technical report, a coordination situation of the construction with broader relations of transport routes, a time and financial plan of construction - object, a study of implementation of main technological stages of building, a project of the site equipment, a design of main construction machines and mechanisms, a time plan of main building, a plan of material resources, a technological regulation for the implementation of monolithic ceiling structures, a quality control and testing plan for monolithic ceiling structures. The diploma thesis also includes the calculation of construction according to THU, a occupational health and safety plan, concreting economics, a noise study, a selected points LEED certification and a budget with site equipment costs.
|
guest ::
